• 조명전기설비학회논문지
• /
• 제28권5호
• /
• pp.122-133
• /
• 2014

This paper deals with the rapid charger which is the mid-type between the slow and fast chargers in the aspect of charging time. In its functions, it can perform the Active Power Filter(APF) function without changing the topology besides the charging function. In addition, to perform the charging and APF function, this paper proposes the mode selection algorithm. The operation of the charger that has APF function and the mode selection algorithm are verified by the simulation and experiment.

• 전력전자학회논문지
• /
• 제27권2호
• /
• pp.165-173
• /
• 2022

The electrification trend of mobility increases every year due to the development of power semiconductor and battery technology. Accordingly, the development and distribution of fast chargers for electric vehicles (EVs) are in demand. In this study, we propose a design and implementation method of an LLC converter for fast chargers. Two 15 kW LLC converters are configured in parallel to have 30 kW rated output power, and the control algorithm and driving sequence are designed accordingly and verified. In addition, the improved power conversion efficiency is confirmed through zero-voltage switching (ZVS) of the LLC converter and reduction of turn-off loss through snubber capacitors. The implemented 30 kW LLC converters show a wide output voltage range of 200-950 V. Experiments applying various load conditions verify the converter performance.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1995년도 하계학술대회 논문집 A
• /
• pp.274-277
• /
• 1995

Recent environmental pollutions have intensified the need to develop zero emission vehicles. The most effect method of such solutions is EV. EV is high energy efficiency, easy to maintain, repair and is possible to make high performance control. However, because energy density of batteries is constrained and the distance covered one charge is short range. Also because EV has disadvantage of poor accelation ability, development of high performance battery is required for large scale use of EV. EV charger analogous to gas apparatus must also be developed immediately. Charger is discriminate between on-vehicle type and off-vehicle type. As off-vehicle type is able to charge fast and safe, inductive charging is considered. This paper aims to develope off-vehicle inductive charging system. Therefore, it achieved power factor correction converter, high frequency DC/AC inverter control algorithm development which gives proof validity through simulation and formulated the basic concept of high frequency transformer design for inductive charging.

• 전력전자학회논문지
• /
• 제27권1호
• /
• pp.74-79
• /
• 2022

This paper proposes a DC-DC converter that satisfies a wide output voltage of 150 V-1000 V for the battery voltage of various electric vehicles and can be controlled in both directions for the demand resource of electric vehicles. The proposed converter is a two-stage structure in which an insulated converter and a non-isolated converter are combined and operates as constant current or constant power depending on the voltage of the connected battery. Experimental results from a 20 kW prototype are provided to validate the proposed charger, and a maximum efficiency of 97% is obtained.

• 전기학회논문지
• /
• 제63권8호
• /
• pp.1055-1063
• /
• 2014

Power losses of a 1-stage DC-DC converter and 2-stage DC-DC converter are compared in this paper. A phase-shift full-bridge DC-DC converter is considered as 1-stage topology. This topology has disadvantages in the stress of rectifier diodes because of the resonance between the leakage inductor of the transformer and the junction capacitor of the rectifier diode. 2-stage topology is composed of an LLC resonant full-bridge DC-DC converter and buck converter. The LLC resonant full-bridge DC-DC converter does not need an RC snubber circuit of the rectifier diode. However, there is the drawback that the switching loss of the buck converter is large due to the hard switching operation. To reduce the switching loss of the buck converter, SiC MOSFET is used. This paper analyzes and compares power losses of two topologies considering temperature condition. The validity of the power loss analysis and calculation is verified by a PSIM simulation model.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1997년도 추계학술대회 논문집 학회본부
• /
• pp.456-458
• /
• 1997

The phase-lock technique is applied to a three-phase semi-bridge type battery charger system. Using an inner fast dynamic loop, the phase-locked voltage control (PLVC) technique of three-phase semi-bridge converter is proposed to give a frequency synchronism and to reduce the subharmonics due to the unbalance of transformer or power line. To protect the power devices, the two stage soft-start, function with softly locking the phase and softly increasing the current is presented. As limiting the reference voltage of the inner voltage control loop, muti-lock phenomena are removed on the PLVC loop. A current limit function is also proposed to limit the current of battery and converter. The proposed controller is confirmed through experiment results.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2008년도 추계학술대회 논문집
• /
• pp.321-324
• /
• 2008

Recently, there is an increasing demand for efficient high power/weight auxiliary power supplies for use on high speed traction application. many new conversion techniques have been proposed to reduce the voltage and current stress of switching components, and the switching losses in the traditional pulse width modulation(PWM) converter. Among them, the phase shift full bridge zero voltage switching PWM techniques are thought most desirable for many applications because this topology permits all switching devices to operate under zero voltage switching(ZVS) by using circuit parasitic components such as leakage inductance of high frequency transformer and power device junction capacitance. The proposed topology is found to have higher efficiency than conventional soft-switching converter. Also it is easily applicable to phase shift full bridge converter by applying an energy recovery snubber consisted of fast recovery diodes and capacitors.

• 한국가스학회지
• /
• 제17권5호
• /
• pp.8-14
• /
• 2013

천연가스에 수소를 첨가하는 수소-천연가스 혼합연료 (HCNG) 엔진 기술은 수소의 빠른 화염속도와 넓은 가연범위를 이용하여 출력 및 배기성능을 최적화하는 기술로서 희박연소 한계를 증가시킴으로써 열효율의 개선은 물론 유해배출물의 저감을 얻을 수 있다. 그러나 과급장치를 사용하는 희박연소 엔진의 경우 전부하 운전조건에서 희박연소 한계의 증가는 충분한 공기량을 공급할 수 있도록 과급용량의 증가가 선결되어야 구현될 수 있다. 본 연구에서는 HCNG 엔진 개발의 일환으로 과급시스템의 변경에 의한 엔진의 출력특성을 파악하고, 과급용량 증대의 적용가능성을 검토하고자 하였다. 터보차저가 과급압력의 증대 보다는 유량이 증가된 영역에서 효율이 높게 설계된 경우 농후한 혼합기 조건에서는 과급압력이 감소되더라도 제원상의 출력을 만족하며 효율적인 운전이 가능하였다.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2012년도 전력전자학술대회 논문집
• /
• pp.279-280
• /
• 2012

In this paper, as a part of studying the fast battery charger, designed the charging system by applying dual converter. This dual converter was applied to the charging system for reducing time by dividing high current which prevents the damage of parts from heating of components. In this paper continued the task by switching the topology of the dual converter for fast charging battery into SISO, PISO, and PIPO. The study to derive the optimized system topology by analyzing the efficiency of charging system.

• 한국ITS학회 논문지
• /
• 제21권6호
• /
• pp.57-69
• /
• 2022

최근 다양한 전기차 판매와 향상된 서비스는 전기차 이용량을 급격히 증가시켰고, 이에 따라 전기차 충전수요가 증가하고 있다. 하지만 전기차 충전소는 부족하고 충전서비스가 필요한 위치와 설치·운영되고 있는 충전소의 위치에 차이가 있어 충전서비스의 효율성이 낮은 실정이다. 이에 본 연구에서는 이용자의 충전수요를 고려한 전기차 급속충전소의 최적입지를 선정하는 방법을 개발하였다. 충전수요를 고려할 수 있는 변수를 도출하고 데이터를 수집하였으며, AHP설문을 통해 각 변수의 가중치를 구하여 셀(cell)별로 가중평균된 입지잠재력점수를 산정하여 서울시 전역의 전기차 충전수요를 고려한 충전소의 최적입지를 도출하였다.