• Journal of Broadcast Engineering
• /
• v.17 no.1
• /
• pp.179-190
• /
• 2012

In Distributed Video Coding(DVC), a low complexity encoder can be realized by shifting complex processes of encoder such as motion estimation to decoder. Since not only motion estimation/compensation processes but also channel decoding process needs to be performed at DVC decoder, the complexity of a decoder is significantly increased in consequence. Therefore, various fast channel decoding methods are proposed for the most computationally complex part, which is the channel decoding process in DVC decoding. As the channel decoding process becomes faster using various methods, however, the complexity of the other processes are relatively highlighted. For instance, the complexity of side information generation process in the DVC decoder is relatively increased. In this paper, therefore, a fast method for the DVC decoding is proposed by using adaptive search range method in side information generation process. Experimental results show that the proposed method achieves time saving of about 63% in side information generation process, while its rate distortion performance is degraded only by about 0.17% in BDBR.

• Korean Chemical Engineering Research
• /
• v.57 no.1
• /
• pp.28-41
• /
• 2019

We carried out performance analysis of Sodium-Water Reaction Pressure Relief System of Prototype Generation-IV Sodium-Cooled Fast Reactor. We analyzed transient-dynamic behavior of fluids inside the steam generator to vent into a sodium dump tank or a water dump tank when tubes in the steam generator were broken to cause a large-water-leak accident. Accordingly, we preliminarily evaluated design requirements of our system. Our results showed that sodium in the shell side of the steam generator and in Intermediate Heat Transport System was completely vented within 50 s and feed water in the tube side of the steam generator was completely vented within 2.5 s. It was analyzed that pressure of the tube side of the steam generator was higher than pressure of the shell side of the steam generator, which showed that sodium in the shell side did not flow into the tube side. Our results are expected to be used as basis information to performance analysis of Sodium-Water Reaction Pressure Relief System of Prototype Generation-IV Sodium-Cooled Fast Reactor.

• The Journal of the Korea Contents Association
• /
• v.12 no.12
• /
• pp.14-24
• /
• 2012

DVC (Distributed Video Coding) techniques need feedback channel for parity bit control to achieve the good RD performances, however, this causes the DVC system to have high decoding latency. In order to implement in real time environments and to accelerate commercializations, many research works have been focusing on the development of fast video decoding algorithm. As one of the real time implementations, this paper deals with a novel DVC scheme suitable for some application areas where source statistics such as motion information can be provided to the encoder side from the decoder side. That is, this paper propose a fast distributed video decoding scheme to improve the decoding speed by using the feedback of motion information derived in SI generation. Through computer simulations, it is shown that the proposed method outperforms the conventional fast DVC decoding schemes.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2011.11a
• /
• pp.299-302
• /
• 2011

분산비디오압축(DVC, Distributed Video Coding) 기술은 부호화기의 복잡한 과정을 복호화기로 이동시킴으로써 경량화 비디오 부호화를 위한 새로운 방법으로 주목 받고 있다. 하지만 복호화기에서 채널 복호 과정과 움직임 추정/보상 과정이 수행됨으로써 복호화기의 복잡도가 상당히 증가하게 되며, 이에 복호화기 채널 복호 과정을 고속화하기 위한 방법이 지속적으로 제안되고 있다. 그러나 채널 복호 과정이 고속화될수록 움직임 추정/보상에 소요되는 계산량이 상대적으로 증가하게 되어, 이에 대한 연구가 필요하다. 따라서 본 논문에서는 상대적으로 증가하는 움직임 추정/보상 과정에 적응적 탐색 영역 방법을 적용하여 DVC 복호화기를 고속화하는 알고리즘을 제안한다. 제안 방법은 고정된 탐색 영역을 사용한 보조 정보 생성 방법과 비교하여 평균 76%의 시간절감이 가능하며, 성능저하는 BDBR이 약 0.31% 증가하는 정도로 크지 않다.

• Journal of Korea Multimedia Society
• /
• v.16 no.2
• /
• pp.180-189
• /
• 2013

The SMART Highway project combines road construction with advanced technology and vehicle telecommunications. Its expected outcome is a world-leading intelligent road that is green, fast, and comfortable. A vehicular ad-hoc network(VANET) is the core technology of the SMART Highway, whose transport operation is based on road vehicles. The VANET is a next-generation networking technology that enables wireless communication between vehicles or between vehicles and a road side unit(RSU). In the VANET system, a vehicle accident is likely to cause a serious disaster. Therefore, some information on safety is essential to serve as the key exchange protocol for communication between vehicles. However, the key exchange scheme of the general network proposed for a fast-moving communication environment is unsuitable for vehicles. In this paper, communication between multiple vehicles more efficient and secure key exchange at the vehicle certification by signcryption is proposed.

• Journal of Sensor Science and Technology
• /
• v.25 no.2
• /
• pp.131-137
• /
• 2016

In this study, a multilevel visible light communication (VLC) system based on resistor ladder circuit is designed to transmit medical data. VLC technology is being considered as an alternative wireless communication due to various advantages such as ubiquity, license free operation, low energy consumption, and no radio frequency (RF) radiation characteristics. With VLC even in places where traditional RF communication (e.g., Wi-Fi) is forbidden, significant bio-medical signal including the electrocardiography (ECG) and photoplethysmography (PPG) data can be transmitted. More lives could be saved anywhere by this potential advantage of VLC with a fast emergency response time. A multilevel transmission scheme is adopted to improve the data capacity with keeping simplicity, where data transmission rate can increase by log2m times (m is the number of voltage levels) than that of conventional VLC transmission based on on/off keying. In order to generate multi-amplitudes, resistor ladder circuit, which is a basic principle of digital to analog convertor, is employed, and information is transferred through LED (Light-Emitting Diode) with different voltage level. In the receiver side, multilevel signal is detected by optical receiver including a photo diode. Then, the collected data are analyzed to serve the necessary medical care to the concerned patient.

• Journal of Korea Multimedia Society
• /
• v.16 no.7
• /
• pp.841-851
• /
• 2013

The infectious information hiding system(IIHS) is proposed for secure distribution of high quality video contents by applying optimized watermark embedding and detection algorithms to video codecs. And the watermark as infectious information is transmitted while target video is displayed or edited by codecs. This paper proposes a fast and effective reversible watermarking and infectious information generation for IIHS. Our reversible watermarking scheme enables video decoder to control video quality and watermark strength actively for by adding control code and expiration date with the watermark. Also, we designed our scheme with low computational complexity to satisfy it's real-time processing in a video codec, and to prevent time or frame delay during watermark detection and video restoration, we embedded one watermark and one side information within a macro-block. Experimental results verify that our scheme satisfy real-time watermark embedding and detection and watermark error is 0% after reversible watermark detection. Finally, we conform that the quality of restored video contens is almost same with compressed video without watermarking algorithm.

• Journal of Digital Contents Society
• /
• v.6 no.4
• /
• pp.201-208
• /
• 2005

In high-technology digital age that change everyday fast, Web became most familiar and essential tool to public. Since creation of web, web began from the first step web that offer simple information and contents. and now, it have developed to step offer dynamic contents that various multimedia components are combined. In future, it will develop to the next generation, intelligence style Semantic Web that Meta Communication of meaning-base is possible. In this paper, we examine about concept and characteristic of Semantic web that is a point technology in next generation. Also, we studied about example and practical use in personalized contents side that is based on Semantic Meta-Communication system. Semantic web is value industry field that has infinite possibility and has necessary of a lot of studies and development yet. Therefore in digital age, we expect this paper will help for space construction of more mature communication.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.53 no.10
• /
• pp.15-23
• /
• 2016

To support the telematics and infotainment services, vehicle-to-everything (V2X) communication requires a robust and reliable network. To do this, the 3rd Generation Partnership Project (3GPP) has recently developed V2X communication. For reliable communication, accurate channel estimation should be done. However, because vehicle speed is very fast, radio channel is rapidly changed with time. Therefore, it is difficult to accurately estimate the channel. In this paper, we propose the new linear minimum mean square error (LMMSE) channel interpolation scheme based on the Long Term Evolution (LTE) sidelink system in vehicle-to-vehicle (V2V) environments. In our proposed reduced decision error (RDE) channel estimation scheme, LMMSE channel estimation is applied in the pilot symbol, and then in the data symbol, smoothing and LMMSE channel interpolation scheme is applied. After that, time and frequency domain averaging are applied to obtain the whole channel frequency response. In addition, the LMMSE equalizer of the receiver side can reduce the error propagation due to the decision error. Therefore, it is possible to detect the reliable data. Analysis and simulation results demonstrate that the proposed scheme outperforms currently conventional schemes in normalized mean square error (NMSE) and bit error rate (BER).

• Journal of Distribution Science
• /
• v.16 no.7
• /
• pp.67-75
• /
• 2018

Purpose - In the 21st century, as information technology advances alongside the emergence of the 4th generation, industrial age, industrial environment has become individualized and customized. It is important to hire good quality employees for good service in the industry. The e-learning market is growing every year. Although e-learning companies are finding better quality employees in e-learning, it is not easy to find it. Companies also spend a lot of time and cost to find employee. On the employees side, they want to get a job freely when they want, but they cannot find their job easily. Furthermore, the labor market environment is changing fast. In the 4th generation, industrial age, employers require to find manpower whenever they need and want at little cost. So of their own accord, we have considered the necessity of management of human resources for employees and employers in e-learning. The purpose of this study is to propose a human cloud platform framework for enabling an efficient management of human resources in e-learning industry. Research design, data, and methodology - To pinpoint the items of a human cloud platform framework, the study was initiated according to the following process. First, items of competency relating to e-learning instructional designer was analyzed. Second, based on the items of information from this analysis, selection and validity verification took place with 5 e-learning specialists group. Third, the opinion of experts who were in charge of hiring in e-learning companies were collated with the questionnaire. Lastly, the human cloud platform framework was proposed based on opinion results. Results - The framework was comprised of 7 domains and 27 items in order to develop the human cloud platform for e-learning instructional designer. The analysis results showed that the most highly considered item were 'skill (4.60)' that employee already have the capability. Following this (in order) were 'project type (4.56)', 'work competency (4.56)', and 'strength area of instructional design (4.52)'. Conclusions - The 27 items in the human cloud platform framework were suggested in this study. Following this, we can consider to develop the human cloud platform for finding a job and hiring e-learning instructional designer easily. For successful platform operation, we need to consider reliability between employer and employee. In addition, we need quality assurance system based on operation has public confidence.