• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.12
• /
• pp.8455-8461
• /
• 2015

In this paper, we propose new search algorithms using SVD(Singular Value Decomposition) for fast search of Raman spectrum. In the proposed algorithms, small number of the eigen vectors obtained by SVD are chosen in accordance with their respective significance to achieve computation reduction. By introducing pilot test, we exclude large number of data from search and then, we apply partial distance search(PDS) for further computation reduction. We prepared 14,032 kinds of chemical Raman spectrum as the library for comparisons. Experiments were carried out with 7 methods, that is Full Search, PDS, 1DMPS modified MPS for applying to 1-dimensional space data with PDS(1DMPS+PDS), 1DMPS with PDS by using descending sorted variance of data(1DMPS Sort with Variance+PDS), 250-dimensional components of the SVD with PDS(250SVD+PDS) and proposed algorithms, PSP and PSSP. For exact comparison of computations, we compared the number of multiplications and additions required for each method. According to the experiments, PSSP algorithm shows 64.8% computation reduction when compared with 250SVD+PDS while PSP shows 157% computation reduction.

• Phonetics and Speech Sciences
• /
• v.10 no.4
• /
• pp.77-89
• /
• 2018

Speech articulators are coordinated for the purpose of segmental constriction in terms of a task. In particular, vertical jaw movements repeatedly contribute to consonantal as well as vocalic constriction. The current study explores vertical jaw movements in conjunction with bilabial constriction in bilabial stop /p/ in the context /a/-to-/a/. Revisiting kinematic data of /p/ collected using the electromagenetic midsagittal articulometer (EMMA) method from seven (four female and three male) speakers of Seoul Korean, we examined maximum vertical jaw position, its relative timing with respect to the upper and lower lips, and lip aperture minima. The results of those dependent variables are recapitulated in terms of linguistic (different word boundaries) and paralinguistic (different speech rates) factors as follows. Firstly, maximum jaw height was lower in the across-word boundary condition (across-word < within-word), but it did not differ as a function of different speech rates (comfortable = fast). Secondly, more reduction in the lip aperture (LA) gesture occurred in fast rate, while word-boundary effects were absent. Thirdly, jaw raising was still in progress after the lips' positional extrema were achieved in the within-word condition, while the former was completed before the latter in the across-word condition. Lastly, relative temporal lags between the jaw and the lips (UL and LL) were more synchronous in fast rate, compared to comfortable rate. When these results are considered together, it is possible to posit that speakers are not tolerant of lenition to the extent that it is potentially realized as a labial approximant in either word-boundary condition while jaw height still manifested lower jaw position in the across-word boundary condition. Early termination of vertical jaw maxima before vertical lower lip maxima across-word condition may be partly responsible for the spatial reduction of jaw raising movements. This may come about as a consequence of an excessive number of factors (e.g., upper lip height (UH), lower lip height (LH), jaw angle (JA)) for the representation of a vector with two degrees of freedom (x, y) engaged in a gesture-based task (e.g., lip aperture (LA)). In the task-dynamic application toolkit, the jaw angle parameter can be assigned numerical values for greater weight in the across-word boundary condition, which in turn gives rise to lower jaw position. Speech rate-dependent spatial reduction in lip aperture may be able to be resolved by means of manipulating activation time of an active tract variable in the gestural score level.

• Food Science of Animal Resources
• /
• v.43 no.2
• /
• pp.331-345
• /
• 2023

The effects of pink inhibiting ingredients (PII) to eliminate the pink color defect in cooked turkey breast produced from presalted and stored raw ground turkey in the absence or presence of sodium tripolyphosphate (STP) were examined. Ground turkey breast was mixed with 2% sodium chloride and vacuum packaged. After storage for 6 d, ten PII were individually incorporated without or with added STP (0.5%) as follows: none (control), citric acid (CA; 0.1%, 0.2%, 0.3%), calcium chloride (CC; 0.025%, 0.05%), ethylenediaminetetraacetic acid disodium salt (EDTA; 0.005%, 0.01%), and sodium citrate (SC; 0.5%, 1.0%). Treatments were cooked at a fast or slow cooking rate, cooled, and stored before analysis. All PII tested were capable of lowering inherent pink color compared to the control (No STP: CIE a^* pooled day reduction of 23.0%, 5.2%, 12.6%, and 12.6% for CA, CC, EDTA, and SC, respectively; STP: reduction of 21.5%, 17.4%, 6.0%, and 18.2% for CA, CC, EDTA, and SC, respectively). For samples without STP, fast cooking rate resulted in higher CIE a^*. However, slow cooking resulted in more red products than fast cooking when samples included STP. Presalting and storage of ground turkey caused the pink discoloration in uncured, cooked turkey (CIE a^* 6.24 and 5.12 for without and with STP). This pink discoloration can be decreased by inclusion of CA, CC, EDTA, or SC, but incorporation of CA decreased cooking yield. In particular, the addition of SC may provide some control without negatively impacting the cooking yield.

• Proceedings of the IEEK Conference
• /
• 2005.11a
• /
• pp.933-936
• /
• 2005

Applications of LCD panel are getting more increased for motion-image applications. However, when the motion-images are displayed on LCD panels, they may be blurred due to slow response time of liquid crystal (LC). One of the solutions of the problem is overdrive technique. The technique has a lot of memory usage. In this paper, we propose a reduction method of the frame memory that is required for LCD overdrive. Proposed overdrive architecture consists of line-based lifting integer (5, 3) DWT filter for image data reduction and BLI (Bi-Linearly Interpolation) LUT for pixel value accelerating.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.11 no.3
• /
• pp.39-47
• /
• 2003

UEGI (Unburned Exhaust Gas Ignition) is an alternative method for fast light-off of a catalyst. It ignites the unburned exhaust mixture using two glow plugs installed in the upstream of the close-coupled catalysts. In addition, a hydrocarbon adsorber was applied to the UEGI, for more effective reduction of HC emission. Engine bench tests show that the CCC reaches the light-off temperature laster than the baseline exhaust system and HC and CO emissions are reduced significantly during the cold start. From the vehicle test, it was observed that a few amount of HC emission was reduced even the catalysts were aged. It is expected to develop a solution kit applicable to a new vehicle or used one, to meet the emission regulation

• Journal of information and communication convergence engineering
• /
• v.10 no.2
• /
• pp.162-167
• /
• 2012

This paper proposes a speech processing system based on a model of the human auditory system and a noise reduction neural network with fast Fourier transform (FFT) amplitude and phase spectrums for noise reduction under background noise environments. The proposed system reduces noise signals by using the proposed neural network based on FFT amplitude spectrums and phase spectrums, then implements auditory processing frame by frame after detecting voiced and transitional sections for each frame. The results of the proposed system are compared with the results of a conventional spectral subtraction method and minimum mean-square error log-spectral amplitude estimator at different noise levels. The effectiveness of the proposed system is experimentally confirmed based on measuring the signal-to-noise ratio (SNR). In this experiment, the maximal improvement in the output SNR values with the proposed method is approximately 11.5 dB better for car noise, and 11.0 dB better for street noise, when compared with a conventional spectral subtraction method.

• Smart Structures and Systems
• /
• v.10 no.2
• /
• pp.155-179
• /
• 2012

This paper aims at assessing the seismic performance of Tuned Mass Dampers (TMDs) based on sets of recorded ground motions. For the simplest configuration of a structure-TMD assembly, in a comprehensive study characteristic response quantities are derived and statistically evaluated. Optimal tuning of TMD parameters is discussed and evaluated. The response reduction by application of a TMD is quantified depending on the structural period, inherent damping of the stand-alone structure, and ratio of TMD mass to structural mass. The effect of detuning on the stroke of the TMD and on the structural response is assessed and quantified. It is verified that a TMD damping coefficient larger than the optimal one reduces the peak deflection of the TMD spring significantly, whereas the response reduction of the main structure remains almost unaffected. Analytical relations for quantifying the effect of a TMD are derived and subsequently evaluated. These relations allow the engineer in practice a fast and yet accurate assessment of the TMD performance.

• Proceedings of the Safety Management and Science Conference
• /
• 2005.05a
• /
• pp.225-230
• /
• 2005

A study is for the approach that we could reduce the logistics costs through uprising the efficiency, complying to the demand in time, stock management based on the general production plan in the point of SCM. We will take following steps to get the goal. First, we will overview the physical distribution expenses annually. Second, will find the main cause of optimal load loss by improper container and lack of delivery flexibility to the demand. Third, the goal will be inferred through the fast information share based on organic relationship, the establishment of general production plan, the improvement of stock management plan. By way of this process, it can be accomplished expense reduction as well as flexible establishment of the reduction of worker's load.

• Proceedings of the KIEE Conference
• /
• 1995.07b
• /
• pp.613-615
• /
• 1995

KEPCO is now going on upgrading the highest system voltage from 345kV to 765kV since 1992. The main reason of this 765kV project is the bulk power transmission from the power generation sites at the East and West coasts to the Kyeong-in area. The first 765kV transmission lines will be constructed by 1998 and operated as 345kV level until 2001. This system needs a detailed evaluation of the 2nd arc in case of 765kV transmission line outages and the countermeasures for the fast arc reduction for the successful high speed reclosing. So, this paper deals with the simulation results of the 2nd arc characteristics using EMTP and comparison of Sh.R and HSGS for the reduction methods.

• Journal of the Korea Safety Management & Science
• /
• v.7 no.2
• /
• pp.41-56
• /
• 2005

A study is for the approach that we could reduce the logistics costs through uprising the efficiency, complying to the demand in time, stock management based on the general production plan in the point of SCM. We will take following steps to get the goal. First, we will overview the physical distribution expenses annually. Second, will find the main cause of optimal load loss by improper container and lack of delivery flexibility to the demand. Third, the goal will be inferred through the fast information share based on organic relationship, the establishment of general production plan, the improvement of stock management plan. By way of this process, it can be accomplished expense reduction as well as flexible establishment of the reduction of worker's load.