• Fire Science and Engineering
• /
• v.22 no.2
• /
• pp.91-96
• /
• 2008

This research studied about the cause analysis of fire that was occurred in far infrared rays heater to base on the fire examples. Fire of electric heater was apt to commit error that handled an over-heating accident by judged molten mark in heat ray. Molten mark which was attached in heat ray was appeared to the form of layer short circuit by other metal material, but other metal material was not found beside the ingredient of heat wire which was mixed to an alloy of Fe-Cr-Al according to result of ingredient distribution by SEM/EDX. Also, the result of overheating experiment by layer short circuit and overvoltage showed higher febrility than normal, but there was no possibility of fire occurrence. This paper will be contributed to science for cause analysis of electric fire through analyzing physical, chemical and flame features of burnout heater on the basis of diagnosis of fire that was happened in infrared rays heater.

• Journal of Power System Engineering
• /
• v.21 no.3
• /
• pp.30-36
• /
• 2017

Carbon fiber shows excellent heat generation value and thermal efficiency comparing with the metallic materials because of its far infrared-rays and radiant heat. So, high performance and economic steam boiler system for the industry can be manufactured by using the carbon fiber heater. The far infrared ray radiation rate was more than 90 % of carbon fiber. Steam boiler system with carbon fiber heater in this study is made up of heating section. In the proof test of steam boiler, the aimed temperature and dwelling time were at $500^{\circ}C$ for 8,000 hours, $600^{\circ}C$-3,000 hours, and $700^{\circ}C$-1,000 hours. The temperature rise rate of steam boiler with carbon fiber heater was about 40% faster than that of the conventional boiler.

• Journal of the Korean Wood Science and Technology
• /
• v.37 no.5
• /
• pp.440-450
• /
• 2009

In case of wood flooring, the high emissivity would be one of the most important properties especially as the cover material of underfloor heating system. The FIR (Far Infrared) materials such as wood emit FIR energy by heating, which has been used as the medical therapy such as dry sauna. This research investigated the emissivity and the emission power of wood composites by comparing the amount of the three heat transfer modes transferred by infrared radiation which came from the increased temperature of the bottom board of the plywood box by the heater. The results showed the value of radiation mode was the highest mode for the plywood box, and the convection mode was the main mode for the aluminum box. The rate of convection was 81.8% in the aluminum box and 48.2% in the plywood box, respectively. In case of the rate of radiation, the aluminum box showed only 15.4% and the plywood box showed 51%. The emissivity and the emission power of birch plywood showed the same values as those of wood. The amount of energy required for the temperature rising of water within vial in the aluminum box and in the plywood box were 3.32 kJ and 6.70 kJ respectively, which showed that the vial temperature of the plywood box was two times higher than that of the aluminum box.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.33 no.9
• /
• pp.1580-1583
• /
• 2004

The effect of far-infrared (FIR) radiation on the antioxidant activity of extracts from Citrus unshiu peels (CPs) was evaluated. CPs (5 g) were placed in Pyrex petri dishes (8.0 cm diameter) and irradiated at 150$^{\circ}C$ for 10, 20, 30, 40 or 50 min with a FIR heater. After FIR irradiation, 70% ethanol extract of CPs were prepared and total phenol contents (TPC), radical scavenging activity (RSA) and reducing power of the extracts were determined. FIR radiation of CPs at 150$^{\circ}C$ for 30 min increased the TPC and RSA of ethanol extract from 71.9${\mu}$M to 133.9 ${\mu}$M and from 29.64% to 51.27%, respectively, and reducing power was increased from 0.451 to 0.675, compared to those of non-irradiated control. These results indicated that FIR radiation onto CPs could liberate and activate covalently bound phenolic compounds that have antioxidant activities.

• Proceedings of the KIEE Conference
• /
• 2007.07a
• /
• pp.1255-1256
• /
• 2007

전도, 대류, 복사 방식의 열전달 방식중에서 복사방식이 가장 효율적이고 쾌적한 난방이라는 것은 기존의 연구에서도 잘 알려진 사실이다. 본 연구에서 제안한 천장형 원적외선 복사난방 방식은 같은 면적에서 같은 전력을 투입하였을 때, 설정온도 도달시간이 기존의 전기 난방기 보다 약 $10{\sim}20$분 빠르게 도달함을 알 수 있으며, 그만큼 에너지절약이 된다는 것을 알 수 있었다.

• Proceedings of the Korea Contents Association Conference
• /
• 2006.05a
• /
• pp.470-474
• /
• 2006

In the case of dryer tendency that select directly without being serviced with salesperson's opinion specially because it does Purchase with sufficient knowledge is package of goods being high and labeling for goods of consumers are indicated to very important element This development wishes to escape and use "Seramik heater" and apply electromagnetic waves cover skill to be Hair Drier that head of a family electromagnetic waves are happened in method and household electric appliance that can raise sexual intercourse of circle infrared rays and High efficiency quantity of heat and coincide in high efficiency and All function anger request in existent metal heat ray.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.42 no.2
• /
• pp.73-78
• /
• 2022

This experiment was conducted to establish the technology for artificial hay preparation in Korea. Using far-infrared heater, a device that can control temperature, airflow, and far-infrared radiation was produced and conducted on the fourth harvested alfalfa. The drying conditions were carried out by selecting a total of four conditions. For each condition, the radiation rate was set to around 40% (33-42%), and the temperature was set at 58~65℃, and the speed of the airflow was fixed at 60m/s. The overall drying time was set to 30 min in the single and 60 min (30-30 min) and 90 min (30-30-30 min) in the complex condition, and the radiation rate and temperature were changed by time period. In the case of drying condition 1, the final dry matter (DM) content was 46.26%, which did not reach a DM suitable for hay. However, all of the alfalfa corresponding to the remaining drying conditions 2 to 7 showed a DM content of 80% or more, resulting in optimal alfalfa hay production. In power consumption according to the drying conditions, the second drying condition showed the lowest at 4.7 KW, and the remaining drying conditions were as high as 6.5 to 7.1 KW. The crude protein content was found to be high at an average of 25.91% and it showed the highest content in the 5th drying condition (26.93%) and the lowest value in the 6th drying condition (25.16%). The digestibility showed a high value with an average of 84.90%, and there was no significant difference among treatments (p>0.05). Considering the above results, it was judged that drying condition 2 was the most advantageous.