• 한국염색가공학회지
• /
• 제16권1호
• /
• pp.1-4
• /
• 2004

This research surveys the twisting and untwisting tensions according to the various processing conditions of belt type texturing such as draw ratio, 1st heater temperature and velocity ratio. The 1st heater temperature was changed from 1606{\circ}C\; to\; 220^{\circ}C$, draw ratio was changed from 1.6 to 1.9 and velocity ratio was changed from 1.4 to 1.8. The twisting and untwisting tensions are measured with the variation of these processing conditions, in addition, the untwisting tension(T2) and tension ratio(T2/Tl) according to the various processing conditions are analysed with the false twist mechanism which is affected to the physical properties of draw textured yams.

• 한국염색가공학회지
• /
• 제15권6호
• /
• pp.33-38
• /
• 2003

This study surveys the effects of POY physical properties and processing conditions of belt texturing machine to the textured yarns. The various textured yarns are made with the variations of 1st heater temperature, draw ratio, velocity ratio, and the physical properties of these specimens such as yam linear density, tenacity, breaking strain, and wet and dry thermal shrinkages are measured and analysed with the various processing conditions of texturing machine. Especially, the thermal characteristics of the textured yarns, which are affected at the fabric hands and the determination of the processing conditions in the dyeing and finishing processes, are investigated through the thermal stress analyser and DSC experiments.

• 한국의류산업학회지
• /
• 제4권4호
• /
• pp.399-404
• /
• 2002

The purpose of this study was to develop the rain melange fabrics with using the pulsar interlacing unit. The properties of the pulsar interlaced yarns (PI yarn) which were textured with the several texturing conditions were analyzed and compared with the regular interlaced yarn (IT yarn) and with normally composited yarn (CP yarn). The results were as follows : The PI yarn which has the best rain random melange effect could be obtained with following texturing condition; 3 kg/$cm^2$ of interlacing air pressure, 1.6 mm diameter of interlacing nozzle and 500 m/min of yarn speed. When IT yarn was compared with CP yarn, IT yarn had higher denier and tenacity than those of CP yarn and had lower elongation and shrinkage than those of CP yarn.

• 한국섬유공학회:학술대회논문집
• /
• 한국섬유공학회 2003년도 봄 학술발표회 논문집
• /
• pp.410-410
• /
• 2003

실에 2차원 혹은 3차원적인 권축변형을 부여하고 이 변형을 적절한 방법으로 고정하며 섬유간의 상호 평행성을 저하시킴으로써 벌키성과 신축성이 부여된 실을 벌크가공사(bulk textured yarn)라고 부른다. 원리적으로는 물리적 변형을 이용하여 섬유간 평행성을 저하시키며, 이를 어떠한 수단으로 고정하는 것이다. 폴리에스터 원사에 대하여 널리 사용되는 방법 중 하나로 가연가공(false twist texturing)법을 들 수 있으며, 본보에서는 가연가공 히터의 온도변화에 따른 원사의 물성 변화에 대하여 분석하고 향후 이러한 기본적인 특성과 외관특성과의 상관성 유무를 확인하고자 한다. (중략)