• International Journal of Air-Conditioning and Refrigeration
• /
• v.9 no.3
• /
• pp.57-62
• /
• 2001

Falling film heat transfer analyses with aqueous lithium bromide solution were performed to investigate the transfer characteristics of the copper tubes. Finned (knurled) tube and a smooth tube were selected as test specimens. Averaged generation fluxes of water and the heat flux were obtained. As the film flow rate of the solution increased, the generation fluxes of water decreased for both tubes due to the fact that the heat transfer resistance increased with the film thickness. The effect of the enlarged surface area at the knurled tube was supposed to be dominant at a small flow rate. The generation fluxes of water increased with the increasing degree of tube wall superheat. Nucleate boiling is supposed to occur at a wall superheat of 20K for a smooth tube, and at 10K for a knurled tube. The increased performance of the knurled tube was supposed to mainly come from the effect of the increased heating surface area.

• Journal of the Korean Chemical Society
• /
• v.16 no.2
• /
• pp.106-116
• /
• 1972

The universality of the pseudo wet bulb temperature has been established in the drying of macroporous inerts, microporous inerts, and microporous swellable materials using water and methyl alcohol as the liquids. The pseudo wet bulb temperature is a new constant temperature intermediate between the wet bulb and dry bulb temperatures of the air during the second falling rate period. This temperature is calculated from consideration of the heat transfer to, and vapor diffusion from, liquid evaporating at the liquid-air boundary. The experimental results agree with that calculated from the equation proposed by Nissan, Bolles and George.

• The Magazine of the Society of Air-Conditioning and Refrigerating Engineers of Korea
• /
• v.17 no.5
• /
• pp.583-589
• /
• 1988

Condensation of water vapor into an absorbent liquid of LiBr-water solution falling over a bank of water cooled horizontal tubes was investigated theoretically. The governing conservation equation for a re-defined physical transport phenomena were solved numerically using a finite difference method. Raw parameters were used in this study, since reliable experimental data is required prior to a dimensionless parametric study. The average values of wall heat transfer coefficient and interfacial absorption rate were defined to see the system performance. Other parameters include tube diameter, streamwise coordinate (and number of tubes in row), mass flow rate, and the wall temperature. The effects of these quantities on the absorption processes and suggestions for a rational system design have been presented.

• The Korean Journal of Food And Nutrition
• /
• v.14 no.1
• /
• pp.40-45
• /
• 2001

This study was conducted to investigate the effects of various emulsifiers on the quality of the waxy rice cake. Falling numbers of the waxy rice flour with monoglyceride, lecithin and control were not significantly different, but with sugar esther 0.5% and 1% showed higher value as 88.4 and 81 than control Initial pasting temperature of the waxy rice flour was 66.78$\^{C}$ and others were 66.45 ∼ 67.05$\^{C}$ by adding 0.5%, 1% of emulsifiers such as monoglyceride, lecithin, sugar esther. Waxy rice flour with 1% sugar ester showed the highest peak viscosity as like as falling number. Waxy rice cake wish various emulsifiers showed tendency to be slowly firming rate as compared with control. In all case, waxy rice flour with sugar ester 1% was considered to be more effective to the decrease of firming rate. Waxy rice flour with lecithin showed worse visual color than others and sugar ester provided best visual and sensory quality. After 5 days cold storage, waxy rice flour with sugar ester 1%\`s Aw was 0.875 and control\`s 0.911. These results suggested that water holding capacity of sugar ester was the best during storage.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.3
• /
• pp.199-208
• /
• 2017

Both cardiovascular diseases caused by decreased body composition and arterial compliance and falling induced by loss of muscle mass are frequent occurrences in the elderly. Therefore, elderly people are advised to perform elastic band resistance exercises to improve their body composition and arterial compliance. Thus, the purpose of this study was to examine the effects of 12 weeks of elastic band resistance training on the body composition, arterial compliance and falling index in elderly females (> 65 years). The elastic band resistance exercise program was administered 3 times per week for 60 minutes each time for 12 weeks. In addition, the exercise intensity was set to 11-14 on the Borg scale (6-20). Before and after the training period, the body composition (body weight (BW), muscle mass, % body fat, body mass index (BMI)), arterial compliance (ankle brachial index (ABI) and pulse wave velocity (PWV)) and risk of falling index were determined. (After the program?), the BW (p=.003), BMI (p=.002), PWV (p=.017) and risk of falling (p=.037) in the exercise group were significantly reduced, whereas the BW (p=.009) and BMI (p=.009) in the control group were significantly increased. In conclusion, the body weight, BMI and arterial compliance of elderly females were positively changed by the elastic band resistance training. Thus, the elastic band resistance exercise may be useful for elderly people to prevent metabolic syndrome and cardiovascular diseases and to reduce their risk of falling.

• Journal of Environmental Science International
• /
• v.23 no.5
• /
• pp.781-786
• /
• 2014

Growth and physiological disorders caused by abnormally low temperatures were evaluated in pepper, an important field crop in Korea. In addition, the effects of chemical treatment using glutamine was verified on minimizing the damages by low temperature. The growth of pepper plants in stem length and diameter was suppressed as the temperature decreased from $25^{\circ}C$, and the suppression level was the highest for plants grown for 90 days at $20^{\circ}C$. However, root growth was not affected by the different temperatures. The number of leaf and leaf area decreased at the temperatures below $25^{\circ}C$, an optimum temperature for growth. Fresh weight and dry weight decreased for plants grown at $20^{\circ}C$. Pepper fruit yield also decreased by 11% at $20^{\circ}C$ in comparison to $25^{\circ}C$. Falling blossom rate was different depending on the growth temperature, and the rate was 27.2% at $25^{\circ}C$, 35.2% at $22.5^{\circ}C$, and 41.0% at $20^{\circ}C$, indicating that falling blossom rate increased as temperature decreased. Different growth temperatures did not affected on the level of symptom of calcium deficiency and Phytopathora blight. Falling blossom was severe at abnormally low temperature of $20^{\circ}C$, but the treatment of glutamine reduced falling blossom rate and increased the yield by 7.0% as compared to control. The optimum concentration of glutamine treatment was 10 mg/L for yields.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.15 no.1
• /
• pp.19-24
• /
• 2003

The objectives of this paper are to develop a new method of wettability mea-surement and to study the effect of surface roughness on the wettability in a $H_2O$/LiBr falling film absorber. Two absorber tubes with micro-scale roughness and a bare tube are tested in a falling film absorber installed in a test rig. Inlet solution temperature, concentration and mass flow rate are considered as key parameters. A new method is proposed to estimate the wettability of a tube by measuring a minimum mass flow rate to wet the tube completely. The wettability for the structured surfaces was higher than that for the bare tube. The wettability decreased linearly along the vertical location. The wettability increased with increasing the solution temperature and the solution mass flow rate. The experimental correlations of the wettability for the bare and the micro-hatched tubes were developed with error bands of$\pm20%\;and\;\pm10%$, respectively. This work can be used in the design of absorbers with micro-scale roughness.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.17 no.9
• /
• pp.830-838
• /
• 2005

The present study investigated the optimization of the absorption performance of the vertical absorber tube with falling film by considering heat and mass transfer simultaneously. Effects of film Reynolds number, geometric parameters by insert device (spring) and flow pattern on heat and mass transfer performances have been also investigated. Especially, effects of coolant flow rate and the flow pattern by geometric parameters has been observed for the total heat and mass transfer rates through both numerical and experimental studies. Based on both predicted values, the optimal coolant flow rate was predicted as 1.98 L/min. The maximum absorption rate of the spring inserted tube was increased by the maximum of $20.0\%$ than those for uniform film of bare tube. Average Sherwood numbers and Nusselt numbers were increased as Reynolds numbers increased under the dynamic and geometric conditions showing the maximum absorption performance.

• Analytical Science and Technology
• /
• v.10 no.6
• /
• pp.418-426
• /
• 1997

Dewatered digested sewage sludge were heated with microwave and their drying characteristics were investigated on the effect of their surface area, shape, diameter and thickness. The drying characteristics of identical samples in a conventional drying oven were studied. In conventional drying, constant rate period was not found and moisture was evaporated with capillary action. Moisture in the sludge was a bound water and free water was not exist. In microwave drying, the falling rate period was divided into two zones. In falling rate drying period, moisture movement occured by diffusion. The evaporation surface area was a significant variable, the greater heating surface area promoted water removal rate over wide region of water content. Drying rate was slow and constant rate drying period was found in wide moisture content region with increasing diameter. Drying characteristics appeared differently in various shape. In microwave heating, first of all temperature of sludge center was increased and was the highest. Temperature in the constant rate drying period was remained constantly at $80{\sim}100^{\circ}C$.

• The Journal of the Convergence on Culture Technology
• /
• v.9 no.2
• /
• pp.113-118
• /
• 2023

This study analyzed the effects of macroeconomic variables, including housing affordability, and bank loan-related variables on variation in housing prices using multiple regression models. As a result of the analysis, consumer price growth rate, the total currency growth rate, and the housing affordability growth rate had a significant positive effect on changes in housing prices. As a result of analyzing the period of rising and falling housing prices, consumer price growth rate and the total currency growth rate during the period of rising housing prices had a significant positive effect on housing prices. Unlike the period of rising housing prices, the growth rate of household loans was found to have a significant positive effect on changes in housing prices. On the other hand, unlike the period of rising housing prices, the growth rater of mortgage loans was found to have a significant negative effect on changes in housing prices. The growth rate of housing affordability index did not have a significant positive effect on changes in housing prices during a falling housing prices. The determinants of housing prices showed different patterns during the period of rising housing prices and falling housing prices.