• Journal of the korean Society of Automotive Engineers
• /
• v.11 no.6
• /
• pp.48-56
• /
• 1989

A shock tube technique was developed in which a freely falling droplets column produced by an ultrasonic atomizer was ignited behind reflected shock. In the present study, the effects of turbulent mixing on the ignition delay of a cetane was decided, also, ignition process was investigated. For the purpose of disturbance of droplets column and mixing, authors installed turbulent lattice in shock tube. Usually, the ignition delay is so called Arrhenius plot which found break point in the Arrhenius plot on the high temperature side. The rate of misfiring increased rapidly below 1080K, but ignition took place from 838k and luminous flame was seen to spread over the whole section by turbulent lattice. Length, from end plate to turbulent lattice, was varied with 60,40,20mm. Also, ignition process was detected by Photo transistor. As a result, it was found that physical factors changed ignition delay greatly and turbulent mixing had a considerable effects in the ignition process.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.11 no.2
• /
• pp.87-94
• /
• 2002

In domestic industry, there is no manufacturers specialized in the production of cutting tools for the difficult cutting materials. Then, we have flew data about them. In this study, the gear driving high speed lathe on which is mounted by a tool dynamometer and high speed CCTV were used to measure the various machining characteristics. Relations among the cutting speed, feed rate per revolution, cutting depth, cutting forces and surface roughness ware graphically analyzed under 64 cutting conditions. The process of chip, i.e., generation, development and falling-off also were visualized for the characterization of chip shapes of the difficult-to-cut materials using the CCTV.

• Proceedings of the KIPE Conference
• /
• 2001.12a
• /
• pp.164-165
• /
• 2001

An IGBT driver for serially connected pulse switching IGBTS was contructed and tested. The IGBT driver has ten output pulses with 1 ${\mu}ysec$ pulse width Its pulse repetition-rate can adjusted from 0 to 20 kHz. The output pulses was insulated from 10 kV high voltage by a pulse transformer. Their voltage amplitude are 18 V, voltage rising time 250 nsec., and voltage falling time 200 nsec when IGBT gates with 12 nF input capacitance are connected.

• International Journal of Safety
• /
• v.4 no.2
• /
• pp.43-46
• /
• 2005

The construction workers might be at the risk of many occupational injuries and illnesses. To protect workers from various hazards, industrial health and hygiene systems were specified for the construction workers by law. It is important to know the actual health and safety(H&S) conditions by tasks and the characteristics of injuries and illnesses of construction workers. This study was designed to investigate the actual conditions of construction workers exposed to various harmful substances and work elements including evaluation of health status of each worker and general H&S system. Questionnaire was sent to 600 construction workers nationwide and totally 367 people responded to it having 61.67% of response rate. The common construction hazards were dust(29.6%), noise(19.3%), repetitive motions(12.0%), handling excessive heavy materials(11.2%) in order. The repetitive motions and handling heavy materials related to muscle disorders accounted for 23.2%. The accident and injury types were in order of overexertion, falling, overturning, dropping or flying, electric shock, collision, etc.

• Journal of Mechanical Science and Technology
• /
• v.18 no.11
• /
• pp.2058-2065
• /
• 2004

A light collecting probe named Multi-color Integrated Cassegrain Receiving Optics (MICRO) is applied to spark-ignited spherical spray flames to obtain the flame propagation speed in freely falling droplet suspension produced by an ultrasonic atomizer. Two MICRO probes are used to monitor time-series signals of OH chemiluminescence from two different locations in the flame. By detecting the arrival time difference of the propagating flame front, the flame propagation speed is calculated with a two-point delay-time method. In addition, time-series images of OH chemiluminescence are simultaneously obtained by a high-speed digital CCD camera to ensure the validity of the two-point delay-time method by the MICRO system. Furthermore, the relationship between the spray properties measured by phase Doppler anemometer (PDA) and the flame propagation speed are discussed with three different experimental conditions by changing the fuel injection rate. It was confirmed that the two-point delay-time method with two MICRO probes is useful and convenient to obtain the flame propagation speed and that the flame propagation speed depends on the spray properties.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• v.10 no.2
• /
• pp.137-145
• /
• 2005

The effects of air temperature and sample thickness on drying kinetics of strawberry leather were investigated. The mathematical modeling was performed by using three thin-layer dying models. The independent variables were sample thickness (S1 = 1.8, S2 = 2.7, and S3 = 3.6mm) and air temperature (50, 60, 70, and 80$^{\circ}$C). All samples took place in the falling rate period. The values of effective moisture diffusivity, D$_{eff}$ varied from 2.40 to 12.1$^{\times}$10-9m$^{2}$/s depending on drying conditions. The values of activation energy, E$_{a}$ were 35.57, 33.14, and 30.46 KJ/mol for each sample of S1, S2, and S3. The two-term exponential model was found to satisfactorily describe the thin-layer drying kinetics of strawberry leather.

• The Korean Journal of Ecology
• /
• v.20 no.4
• /
• pp.239-244
• /
• 1997

Hybrid poplar (Populus trichocarpa $\times$ P. deltoides) clones were fumigated with ozone. Fumigation was applied for 6 to 8 hours each day for approximately 3 months at ozone concentrations of 0.090 to 0.115 ppm using by open-top chambers. Growth and biomass of hybrid poplar seedlings were reduced by ozone exposure. Mean percentage of falling leaves in ozone-treated plant was 6 times higher than that of charcoal-filtered plant. Among physiological responses, rate of photosynthesis, stomatal conductance, transpiration and initial Rubisco activity were significantly lower in seedlings grown in ozone environment compared seedlings grown in charcoal-filtered air. All these physiological results supported that biochemical process to be a key feature to understand reduction in photosynthesis.

• International Journal of Internet, Broadcasting and Communication
• /
• v.9 no.1
• /
• pp.35-41
• /
• 2017

In the rapid industrialization and civilization, the material and the life have been enriched, but smart phone and the Internet are spreading and the spirit of Korean modern people is falling into addiction without knowing themselves. In particular, according to the recent Internet addiction reported by the National Statistical Office, "the Internet addiction rate in 2014 is the highest among adolescents to 19 years old." This study empirically analyzed whether internet addiction, smart phone addiction, sports activities and reading affect adolescents' emotional intelligence and self-esteem. Regression analysis showed that internet addiction, smart phone addiction and sports activities affected emotional intelligence and reading did not affect. Also, internet addiction, smart phone addiction and sports activities were found to affect self-esteem and reading did not affect. Reading and emotional intelligence, reading and self-esteem seem to require further study in the future.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.25 no.7
• /
• pp.780-790
• /
• 1988

We have studied the hot-carrier-induced degradation caused by the high channel electric field due to the decrease of the gate length of MOSFET used in VLSI. Under DC stress, the condition in which maximum substrate current occures gave the worst degradation. Under AC dynamic stress, other conditions, the pulse shape and the falling rate, gave enormous effects on the degradation phenomena, especially at 77K. Threshold voltage, transconductance, channel conductance and gate current were measured and compared under various stress conditions. The threshold voltage was almost completely recovered by hot-injection stress as a reverse-stress. But, the transconductance was rapidly degraded under hot-hole injection and recovered by sequential hot-electron stress. The Si-SiO2 interface state density was analyzed by a charge pumping technique and the charge pumping current showed the same trend as the threshold voltage shift in degradation process.

• Journal of the Korean Society of Visualization
• /
• v.6 no.2
• /
• pp.20-27
• /
• 2008

The color sorting technique utilizing the image processing method is very applicable tool to analyze motion of a free-falling object in many agricultural and industrial research fields. In the present study, we have developed an image processing system and algorithm to sort good quality rice grains effectively from the bad ones. The system employs a high speed rate line-scan CCD camera with 2K-pixels and worked with a high speed DSP and FPGA in-line. It can accumulate acquired line-scan image data and visualize each grain image clearly. As a result, we can easily calculate the number of pixels occupied by grain(=grain size), gray level and its correct position by visualizing grain images rapidly.