• The Transactions of the Korean Institute of Power Electronics
• /
• v.5 no.6
• /
• pp.584-591
• /
• 2000

Power Quality Compensator(PQC) has been installed to protect the sensitive loads against the voltage disturbances, such as voltage sag and interruption. In general, static switch is used for the purpose of link between utility and PQC. So transfer operation of the static switch play a important part in the PQC. Many studies on the structure and control of PQC have been progressed in active, but these researches have been rarely mentioned about any voltage-disturbances-detection method to start the PQC operation. In this paper, a new voltage-disturbances-detection algorithm for computer application loads using the CBEMA/ITIC curve is proposed for transfer operation of the static switch. The proposed detection algorithm is implemented to get fast detecting time through the comparison of instantaneous 3-phase voltage values transferred to DC values in the synchronous reference frame with the operating reference values. To get the robust characteristics against the noise, a first order digital filter is designed. The magnitude falling and phase delay caused by the filter are compensated through the error normalizing and numerical analysis using transfer function, respectively. Finally, the validity of the proposed algorithm is proved by ACSL simulation and experimental results.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.39B no.6
• /
• pp.414-423
• /
• 2014

The number and size of resource constituting the web page has been increasing steadily, and this circumstance leads to rapidly falling quality of web service in mobile network that offer relatively higher delay. Moreover, Improving the quality of a web services protocol is difficult to provide network function because the current network architecture has closed structure. In this paper, we suggest schemes to enhance web performance in mobile network, which are Check Coded DOM scheme and Functional JavaScript Transmission scheme, and then try to seek idea which can be provided suggested schemes as a network function using NFV(Network Function Virtualization). For the performance evaluation and analysis about the suggested schemes, we perform network simulation using SMPL library. We confirm that suggested schemes offer better performance in term of page loading time, the number of message and the amount of traffic in the network than HTTP Protocol.

• Journal of the Korean Society of Hazard Mitigation
• /
• v.7 no.2 s.25
• /
• pp.35-44
• /
• 2007

Plowable fill is generally a mixture of sand, fly ash, a small amount of cement and water. Sand is the major component of most flowable fill mixes. Marine dredged soil was adopted for flowable fill instead of fly ash. Natural sea sand and in-situ soil were used for comparison. The flow behavior, hardening characteristics, and ultimate strength behavior of flowable fill were investigated. The unconfined compression test necessary to sustain walkability as the fresh flowble fill hardens was determined and the strength at 3-days appeared to correlate well with the water-to-cement ratio. The strength parameters, like cohesion and internal friction angle, was determined along the curing time. The creep test for settlement potential was conducted. Also, potable falling weight deflectometer(PFWD) test has been carried out for elastic modulus of each controlled low strength materials(CLSM). The data presented show that marine dredged soil and in-situ soil can be successfully used in CLSM.

• Korean Journal of Digital Imaging in Medicine
• /
• v.12 no.2
• /
• pp.71-79
• /
• 2010

Thanks to the great development of technology in radiation, we are now able to reduce radiation exposure to the patients, and the radiographer and expenses in medical sector. We are also trying to produce ideal images which maintain useful information. These kinds of effort are increasing over the world. For that reason, we should get images which include necessary data of patients. Then it also can help to reduce radiation exposure to the patients. Therefore, we need to know the problems that cause a falling off in image's quality and check on generator in case of their electronic and mechanical errors. And moreover, we should anticipate the possibility of devices errors and prevent them with regular quality control. This investigation was conducted in medical institutions, institute of educations and hospitals. They are all in Seongnam-City. We used PMX-III, kVp meter to implement kVp test, mR / mAs output test, light fiel / beam alignment test, Reproducibility of exposure dose, half value layer test, reproducibility of exposure time test. in the case of hospitals, they perceive the importance of regular quality control and organize the regular quality control team so they can be satisfied with the error standard in most experiments. On the other hand, when it comes to medical institutions and institute of educations, they perceive the importance of regular quality control less than hospitals do. Radiographer need to understand the importance of regular quality control and practice it so they can get the fine ideal image with the lower dose to the patient.

• Korean Journal of Applied Biomechanics
• /
• v.27 no.1
• /
• pp.45-52
• /
• 2017

Objective: The aim of this study was to investigate the periodicity of the lower extremity joint flexion/extension angle to compare the local stability between young and elderly women during walking on a treadmill. Method: Eighteen young women (mean $age=21.2{\pm}1.6y$; mean $mass=57.1{\pm}6.1kg$; mean $height=1.61{\pm}0.04m$) and 18 elderly women (mean $age=66.4{\pm}1.2y$; mean $mass=55.4{\pm}8.3kg$; mean $height=1.56{\pm}0.04m$) participated in this study. Approximate entropy (ApEn) was used to determine the periodicity in the lower limb joint angles. Results: The ApEn values of the two groups were statistically greater in the surrogate data test than in the original time series data (p<.05). The periodicity of the hip and ankle flexion/extension angles decreased in the elderly women group compared with the young women group (p<.05). The periodicity of the lower extremity joint flexion/extension angle showed that the ankle joint increased dominatingly in both groups (p<.05); the hip joint decreased compared with the knee joint in the young women group; and the knee joint decreased compared with the hip joint in the elderly women group (p<.05). Conclusion: These results suggest that the lower extremity joint flexion/extension angles of the young and elderly women during walking contained random noises as well as biological signals. In addition, the differences in the periodicity in the lower extremity joint between the young and elderly women may provide some insight in predicting potential falls and be used as a characteristic indicator for determining local stability in elderly women during walking.

• Water for future
• /
• v.27 no.2
• /
• pp.111-120
• /
• 1994

In this experimental research, the maximum scour depth at pier was studied. The model of the pier of San Gye bridge in the Bocheong stream was set for experimental pier scour studies. Several model verification processes were conducted through the roughness comparisons between model and prototype, pursuring scour depth variations with time depending upon channel bed variation, the comparison of the ratio between falling velocities and shear velocities in the model and prototype, and the comparison of pier scour between experimental data and field measuring data. The experiments were conducted in the free flow conditions and pressure flow conditions. The maximum scour depth at piers in the pressure flow conditions is twice as much as compared to the free flow conditions. Also, the maximum scour depth variations are indicated in the figures based on the Froude numbers, opening ratios, water depths and approaching angles in the free surface flow conditions.

• Journal of Korean Physical Therapy Science
• /
• v.10 no.1
• /
• pp.222-231
• /
• 2003

The ACL(Anterior cruciate ligament) is the smallest of the four main ligaments of the knee, but it is the primary stabilizer. Injuries have a tendency to occur when the foot is firmly planted and the knee is twisted. Any sports that requires acceleration, change of direction and deceleration can increase the chances of suffering an ACL tear. The incidence of severe knee sprains that involve the ACL are at an all-time high. Since 1980, the number of these injuries have increased at least three-fold. Although the rate of increase has been much less dramatic since the middle 1980s, even the ultra-modem releasable ski binding has not been able to start reducing the incidence of ACL injuries. An ACL injury prevention program developed for downhill skiers by the Vermont Safety Research group emphasized increasing awareness of situations that can potentially result in an ACL injury and pre-planning strategies if events, leading to these situations, begin to fall in place. As part of the above study by Ettlinger et al., an educational prevent program was developed to teach these principles and thus reduce the rate of serious knee injuries. Four thousand instructors and patrol at 20 ski resorts who received the training had a 62% decline in serious knee injuries compared to a similar group that did not receive this training. Whenever you fall, try not to fully straighten your legs. Don't try to get up until you've stopped sliding(unless you are try to avoid an obstacle or other skier). When you're down, stay down. And don't land on your hand. So, if you feel yourself falling: arms forward, ski plates together, hands over knee. Then you will be able to save your ACL.

• The Journal of Engineering Geology
• /
• v.16 no.3 s.49
• /
• pp.293-300
• /
• 2006

The groundwater movement in the west costal landfill area was analyzed by measuring N value by Standard Penetration Test, coefficient of permeability by falling head method, linear structure analysis by Digital Elevation Method, groundwater flow direction and rate by flowmeter logging due to tidal variation in the each borehole. The coefficients of permeability of the weathered zone and of the marine deposit showed similar values although some values of weathered zone show smaller values than those of the marine deposit. The major groundwater flow and rate in the marine deposit observed as east-west direction due to tidal variation, but on the other hand it was observed as N45E in weathered zone which is the major direction of the linear structures in the area. 2 hours delayed changes of the groundwater flow direction was observed during the 24 hours observation, and it seems to be a travel time of the tidal wave which cause the continuous change of the hydaulic gradient of the groundwater.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2009.03a
• /
• pp.987-992
• /
• 2009

Continuous Compaction Control is a new cutting edge technique in United States, Japan and European construction market that uses an instrumented compactor to measure soil stiffness in real time usually with vehicle tracking system such as Global Navigation Satellite System (GNSS). In this study, soil stiffness was evaluated by adapting Fourier transforming technique with acceleration data obtained from accelerometers used as a continuous compaction control instrument. The soil stiffness obtained by accelerometers gave analogous results with reference results such as dry density, elastic modulus obtained from Geogauge and Light falling deflectometer.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.66 no.11
• /
• pp.1584-1590
• /
• 2017

This paper presents a implementation method of reliable speed limitation controller considering motor parameter variation in high speed operation. In spinning process of drum washing machine, speed increase has to be limited when unallowable imbalance mass is detected. Otherwise, severe noise and vibration can happen because noise and vibration are proportional to imbalance mass. To detect imbalance mass, d-axis current magnitude is used. However, we have to compensate for back-emf and power supply variation by means of detecting them because d-axis current is affected by both of them. On the other hand, we have to carefully estimate back-emf because back-emf is affected by stator resistance variation and inverter voltage error. Stator resistance variation can happen by manufacturing process for mass production or temperature variation in running. And there are inverter voltage errors between command voltage from micro-computer to inverter and real voltage from inverter to motor because of rising and falling time delay and turn-on resistance of power semiconductor switch. To solve this problem, we propose 2-step align current injection method which is to inject step-wise current right before starting. By this method, we can simply obtain stator resistance by ratio of voltage without inverter voltage error and current, and we can measure inverter voltage error. So we can obtain more exact model current, and then by simple calculation with compensation gain, we can estimate more accurate motor back-emf. We show that this method works well. It is verified through experiments.