• International Journal of Automotive Technology
• /
• 제4권4호
• /
• pp.203-211
• /
• 2003

This paper describes a method for a falling weight impact test to estimate the impact energy absorbing characteristics and impact strength of CFRP (Carbon-fiber reinforced plastics) laminate plates based on considerations of stress wave propagation theory, which were converted to measurements of load and displacement verses time. The delamination area of impacted specimens for the different ply orientations was measured with an ultrasonic C-scanner to determine the correlation between impact energy and delamination area. The energy absorbed by a quasi-isotropic specimen having four interfaces was higher than that of orthotropic laminates with two interfaces. The more interfaces, the greater the energy absorbed. The absorbed energy of a hybrid specimen embedding GFRP (Glass-fiber reinforced plastics) layer was higher than that of normal specimens. Also, a falling weight impact tester was built to evaluate the characteristics and impact strength of CFRPs.

• 한국생산제조학회지
• /
• 제22권6호
• /
• pp.963-968
• /
• 2013

In this study, we carried out a structural analysis for determining the stresses acting on the tempered glass of a freely falling cellular phone using ANSYS 13.0, commercial finite element code. We designed a phone heavier than any contemporary cellular phone and performed finite element analysis using the falling speed at a height of 104 cm, which is equal to of the average leg length of Koreans. By determining the maximum stress acting on the phone's tempered glass and frame, we identified the location of large deformation. Furthermore, we evaluated the maximum/minimum equivalent stress and deformation of the reinforced glass and frame as functions of time.

• 설비공학논문집
• /
• 제19권8호
• /
• pp.593-598
• /
• 2007

The present study has dealt with the measuring method of ice slurry viscosity using falling sphere viscometer. The experimental apparatus was composed by test section and high-speed video system. And the spheres used in this study were alumina and glass. The main parameters were ice packing factor (IPF) and falling velocity of sphere so the acquired results were discussed for these parameters. The viscosity of ice slurry was calculated by using measured falling velocity and moving distance at instantaneous time and the Stokes hypothesis was used for this calculation. It was clarified that possible measuring range was $IPF\;=\;0.06{\sim}0.14$ of this type of measuring device and measuring method. In addition, it was clarified that the viscosity of ice slurry increased to increase of ice packing factor (IPF) of ice slurry.

• Journal of Advanced Marine Engineering and Technology
• /
• 제30권5호
• /
• pp.597-607
• /
• 2006

This paper presents a numerical simulation of the behavior of the LiBr solution droplets and falling films in horizontal tube banks of absorber. The model developed here accounts for the details of the droplets formation and impact process for absorption on horizontal tubes including the heat transfer from solution film to the tube wall. Especially. the characteristic of unsteady behavior of solution flow has been investigated. Flow visualization studies shown that the solution droplets and falling films have some of the complex characteristics. It is found that. with the numerical conditions similar to the operating condition of an actual absorption chiller/heater, the outlet solution temperature and heat flux from solution film to the tube wall have a stable periodic behavior with time. The solution droplets and falling films in horizontal tube banks of absorber is a periodic unsteady flow. The results from this model are compared with previous experimental observation taken with a high-speed digital video camera and shown good agreement.

• Fisheries and Aquatic Sciences
• /
• 제9권4호
• /
• pp.167-174
• /
• 2006

Two typical responses have been documented for flatfish when they encounter the ground gear of bottom trawls: herding response and falling back response. These two responses were analyzed from video recordings of fish and were characterized by time sequences for four parameters: swimming speed, angular velocity, acceleration, and distance between the fish and the ground gear. When flatfish displayed the falling-back response, absolute values of the three swimming parameters and their deviations were significantly higher than those during the herding response. However, the swimming parameters were not dependent on the distance between the flatfish and the ground gear, regardless of which response occurred. The dominant periods for most of the movement parameters ranged from 2.0 to 3.7 s, except that no periodicity was observed for swimming speed or angular velocity during the falling-back response. However, variations in the four parameters during the falling -back response revealed greater irregularity in periodicity and higher amplitudes. This complex behavior is best described as a chaos phenomenon' and is discussed as the building block for a model predicting the responses of flatfish to ground gear as part of the general understanding of the fish capture process.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2008년도 추계학술대회B
• /
• pp.2489-2494
• /
• 2008

The two-dimensional circular cylinder freely falling in a channel has been simulated by using Immersed boundary - lattice Boltzmann method in order to analyze the characteristics of motion originated by the interaction between the fluid and the solid. The wide range of the solid/fluid density ratio has been considered to identify the effect of the solid/fluid density ratio on the motion characteristics such as the falling time, the terminal velocity and the trajectory in the vertical and horizontal directions. In addition, the effect of the gap between the cylinder and the wall on the motion of two-dimensional circular cylinder freely falling has been revealed by taking into account a various range of the gap size. The Reynolds number in terms of the terminal velocity is diminished as the cylinder becomes close to the wall at the initial dropping position, since the repulsive force induced between the cylinder and wall constrains the vertical motion. Quantitative information about the flow variables such as the pressure coefficient and vorticity on the cylinders is highlighted.

• Journal of Forest and Environmental Science
• /
• 제28권4호
• /
• pp.247-253
• /
• 2012

The purpose of this study was to conduct phenology monitoring of forest plant species in Mt. JuWang National Park, thereby establish long-term prediction and management system for species susceptible to climate change, and utilize the result as basic materials necessary for conservation of plant genetic resources in accordance with changes in their growth environment. Global Positioning System coordinates were marked on each indicator species and a specific number ticket was provided to each plant. Changes in their blooming time, time of blossoms falling, time of leaves bursting into life, and time of leaves turning, and time of leaves falling were recorded. Investigation was made once per week from April 10 in 2010 to November 30 in 2011 except for the time period between July and August when investigation was made biweekly. The investigated plants concerned 12 kinds-nine species of trees and three kinds of herbs. According to the result of the penology monitoring of Mt. JuWang National Park, their time of leaves bursting into life, time of leaves turning, and time of leaves falling were largely earlier in 2011 than in 2010. However, it is hard to say that it is due to the factor of climate change. Long-term collection of climate data and continuous monitoring of plant phenology are considered necessary in order to examine correlation between climate change and seasonal change patterns of plants.

• 한국컴퓨터정보학회논문지
• /
• 제17권11호
• /
• pp.33-38
• /
• 2012

미도는 문 스펜서가 제시한 이론으로 아름다움의 정도를 수치로 표현하려 한 것이다. 그리고 미국의 학자 버크호프가 문 스펜서의 미는 복잡성 속의 질서성을 가진 것이라는 명제를 분석하였다. 그는 미도의 공식을 발표하여 미도의 정도를 수량적으로 취급하였다. 따라서 기존의 색채 조화론의 부족한 점을 제거하여 보다 과학적이고 정량적인 조화이론을 전개했다. 본 논문에서는 배색의 좋고 나쁨은 질서의 요소와 복잡함의 요소로 나누었다. 미도는 질서의 요소를 복잡함의 요소로 나눈 것이다. 이를 영상의 미도 계산에 활용하여, 감성으로 취급되는 색채조화 및 부조화의 문제를 수치적으로 계산하였다. 그리하여 영상에서 색을 판별하여 미도가 좋은 배색인지 아닌지를 나타내었다.

• Journal of Biosystems Engineering
• /
• 제41권4호
• /
• pp.342-356
• /
• 2016

Purpose: The drying of a thin layer of native cassava starch in a tray dryer was modeled to establish an equation for predicting the drying behavior under given conditions. Methods: Drying tests were performed using samples of native cassava starch over a temperature range of $40-60^{\circ}C$. We investigated the variation in the drying time, dynamic equilibrium moisture content, drying rate period, critical moisture content, and effective diffusivity of the starch with temperature. The starch diffusion coefficient and drying activation energy were determined. A modification of the model developed by Hii et al. was devised and tested alongside fourteen other models. Results: For starch with an initial moisture content of 82% (db), the drying time and dynamic equilibrium moisture content decreased as the temperature increased. The constant drying rate phase preceded the falling rate phase between $40-55^{\circ}C$. Drying at $60^{\circ}C$ occurred only in the falling rate phase. The critical moisture content was observed in the $40-55^{\circ}C$ range and increased with the temperature. The effective diffusivity of the starch increased as the drying temperature increased from 40 to $60^{\circ}C$. The modified Hii et al. model produced randomized residual plots, the highest $R^2$, and the lowest standard error of estimates. Conclusions: Drying time decreased linearly with an increase in the temperature, while the decrease in the moisture content was linear between $40-55^{\circ}C$. The constant drying rate phase occurred without any period of induction over a temperature range of $40-55^{\circ}C$ prior to the falling rate period, while drying at $60^{\circ}C$ took place only in the falling rate phase. The effective diffusivity had an Arrhenius relationship with the temperature. The modified Hii et al. model proved to be optimum for predicting the drying behavior of the starch in the tray dryer.

• 한국인터넷방송통신학회논문지
• /
• 제19권1호
• /
• pp.29-35
• /
• 2019

4차 산업 혁명이 진행되며 많은 회사들의 스마트 팩토리에 대한 관심이 커지고 있으며 센서의 중요성 또한 대두되고 있다. 정보를 수집하기 위한 센서에서 고장이 발생하면 공장을 최적화하여 운영할 수 없기 때문에 이에 따른 손해가 발생할 수 있다. 이를 위해 센서의 상태를 진단하여 센서의 고장을 진단하는 일이 필요하다. 본 논문에서는 디지털 센서의 고장유형 중 Rising time과 Falling time 고장을 딥러닝 알고리즘 RNN의 LSTM을 통해 신호를 분석하여 고장을 진단하는 모델을 제안한다. 제안한 방식의 실험 결과를 정확도와 ROC 곡선 그래프의 AUC(Area under the curve)를 이용하여 Rule 기반 고장진단 알고리즘과 비교하였다. 실험 결과, 제안한 시스템은 Rule 기반 고장진단 알고리즘 보다 향상되고 안정된 성능을 보였다.