• 한국터널지하공간학회 논문집
• /
• 제15권3호
• /
• pp.345-356
• /
• 2013

본 연구에서는 SPH(Smoothed Particle Hydrodynamics) 코드를 사용하여 TBM에 장착되는 디스크커터에 의한 암석의 절삭과정을 모사하였다. 이를 위하여 본 연구에서는 3차원 FEM 해석 상용프로그램인 AUTODYN3D를 사용하였으며 이를 통해 국내 황등화강암을 대상으로 총 25개의 절삭조건에 대한 수치적인 절삭시험을 수행하였다. 암석과 디스크커터를 각각 라그란지안 솔버와 SPH 솔버를 사용하여 3차원 형상으로 모델링 하고 두 개의 디스크커터가 순차적으로 암석을 절삭하도록 모델링 하였다. 수치해석과 LCM시험에서 측정한 디스크커터의 작용력은 오차 10%이내의 값을 보여 대체로 일치하는 것으로 나타났고 균열의 전파양상과 암석의 파쇄양상 또한 유사한 것으로 나타났다. 또한 절삭된 최적 커터간격을 측정한 결과 LCM시험 결과와 일치하였다. 이를 통해 SPH코드를 사용한 수치해석기법의 적용성을 확인할 수 있었으나 해석시간을 단축하기 위한 Lagrange-SPH코드의 커플링에 관한 후속연구가 필요할 것으로 판단되었다.

• Computers and Concrete
• /
• 제17권3호
• /
• pp.407-421
• /
• 2016

This paper presents numerical modeling of the structural behavior of CFRP (carbon fiber reinforced polymer) strengthened RC (reinforced concrete) beams under four-point bending. Simulation of debonding at the CFRP-concrete interface was focused, as it is the main failure mode of CFRP strengthened RC beams. Here, cohesive layer was employed to model the onset of debonding, which further helps to describe the post debonding behavior of the CFRP strengthened RC beam. In addition, the XFEM approach was applied to investigate the effects of crack localization on strain field on CFRP sheet and rebar. The strains obtained from the XFEM correlate better to the test results than that from CDP (concrete damaged plasticity) model. However, there is a large discrepancy between the experimental and simulated loaddisplacement relationships, which is due to the simplification of concrete constitutive law.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2002년도 하계학술대회 논문집
• /
• pp.18-21
• /
• 2002

As the mask design rules get smaller, the probability of the process failure becomes higher due to the narrow overlay margin between the contact and metal interconnect layers. To obtain the minimum process margin, a tabbing and cutting method is applied with the rule based optical proximity correction to the metal layer, so that the protection to bridge problems caused by the insufficient space margin between the metal layers can be accomplished. The side-lobe phenomenon from the attenuated phase shift mask with the tight design nile is analyzed through the aerial image simulation for test patterns with variation of the process parameters such as numerical aperture, transmission rate, and partial coherence. The corrected patterns are finally generated by the rules extracted from the side-lobe simulation.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2002년도 하계종합학술대회 논문집(2)
• /
• pp.209-212
• /
• 2002

As the mask design rules get smaller, the probability of the process failure becomes higher doc to the narrow overlay margin between the contact and metal interconnect layers. To obtain the minimum process margin, a tabbing and cutting method Is applied with the rule based optical\ulcorner proximity correction to the metal layer, so that the protection to bridge problems caused by the insufficient space margin between the metal layers can be accomplished. The side-lobe phenomenon from the attenuated phase shift mask with the tight design rule is analyzed through the aerial image simulation for test patterns with variation of the process parameters such as numerical aperture, transmission rate, and partial coherence. The corrected patterns are finally generated by the rules extracted from the side-lobe simulation.

• Journal of Electrical Engineering and Technology
• /
• 제11권3호
• /
• pp.575-584
• /
• 2016

Considering the randomness and uncertainty of wind power, a reliability model of WTGs is established based on the combination of the Weibull distribution and the Markov chain. To analyze the failure mode quickly, we use the switch-section partitioning method. After defining the first-level load zone node, we can obtain the supply power sets of the first-level load zone nodes with each WTG. Based on the supply sets, we propose the dynamic division strategy of island operation. By adopting the fault analysis method with the attributes defined in the switch-section, we evaluate the reliability of the distribution network with WTGs using a sequential Monte Carlo simulation method. Finally, using the IEEE RBTS Bus6 test system, we demonstrate the efficacy of the proposed model and method by comparing different schemes to access the WTGs.

• 대한전자공학회논문지
• /
• 제22권5호
• /
• pp.50-56
• /
• 1985

A common failure mechanism in bulk CMOS integrated circuits is the latch-up of parasitic SCR structure inherent in the bulk CMOS structure. Latch-up triggering and holding charac-teristics have been measured in the test devicrs which include conventional and Schottky-damped CMOS structures with various well depths and n+/p+ spacings. It is demonstrated that Schottky-clamped CMOS is more latch-up immune than conventional bulk CMOS. Finally, the simulation results by circuit simulation program (SPICE) are compared with measured results in order to verify the validity of the latch-up modal composed of nan, pnp transistors and two external resistors.

• 산업경영시스템학회지
• /
• 제29권1호
• /
• pp.18-25
• /
• 2006

In mobile ad-hoc networks(MANETs), nodes are mobile and network topology changes very frequently. The mobility of nodes does affect the system performance. There has been considerable attention on the mobility models, however, most work is confined to the simulation or test-bed. In this paper, we propose an analytical method to evaluate the performances of MANETs such as the average radio range dwell time of mobile nodes, link holding time, and transmission failure probability considering the node's mobility. In the proposed model, MANETs consist of the multi-hop and multicasting routing paths. A simulation is done to validate our proposed analytical model.

• 대한토목학회논문집
• /
• 제28권4A호
• /
• pp.529-536
• /
• 2008

구조물의 파괴 거동은 하중의 재하 속도에 따라 달라지는 특성을 보이는데, 이는 재료의 속도 의존성으로부터 비롯된다고 할 수 있다. 이러한 현상은 공학의 여러 분야에서 관심사였지만, 파괴 메커니즘이 명확히 규명되지 않았기 때문에 수치 해석을 통한 연구에는 그 한계점과 어려움이 상존하였다. 본 연구에서는 파괴 거동의 속도 의존성을 이해하고자, 취성재료를 대상으로 입자동역학을 이용한 수치해석을 수행하였다. 직접 인장 시험 시뮬레이션을 위해 노치가 있는 시편을 모델링하고, 취성재료가 갖는 특성을 표현하기 위해 Lennard-Jones 포텐셜을 사용하였다. 6가지의 다른 하중 속도에 따른 균열의 거칠기, 균열의 후퇴와 멈춤, 분기 현상과 같은 동적 파괴 특성을 관찰하였다. 해석 결과를 통해 하중 속도에 따른 파괴 거동의 변화 원인을 에너지 유입-소모율의 개념을 도입하여 설명하고, 재료의 파괴 메커니즘이 갖는 속도 의존성에 대해 이해할 수 있는 단초를 마련하였다. 또한, 기존 실험과의 비교를 통해 실제적인 현상과의 유사성을 밝힘으로써 입자동역학의 공학적 적용 가능성을 제시하였다.

• Steel and Composite Structures
• /
• 제22권4호
• /
• pp.797-820
• /
• 2016

This paper simulates the hysteretic behavior of steel reinforced recycled concrete (SRRC) columns under cyclic loads using OpenSees software. The effective fiber model and displacement-based beam-column element in OpenSees is applied to each SRRC columns. The Concrete01 material model for recycled aggregate concrete (RAC) and Steel02 material model is proposed to perform the numerical simulation of columns. The constitutive models of RAC, profile steel and rebars in columns were assigned to each fiber element. Based on the modelling method, the analytical models of SRRC columns are established. It shows that the calculated hysteresis loops of most SRRC columns agree well with the test curves. In addition, the parameter studies (i.e., strength grade of RAC, stirrups strength, steel strength and steel ratio) on seismic performance of SRRC columns were also investigated in detail by OpenSees. The calculation results of parameter analysis show that SRRC columns suffered from flexural failure has good seismic performance through the reasonable design. The ductility and bearing capacity of columns increases as the increasing magnitude of steel strength, steel ratio and stirrups strength. Although the bearing capacity of columns increases as the strength grade of RAC increases, the ductility and energy dissipation capacity decreases gradually. Based on the test and numerical results, the flexural failure mechanism of SRRC columns were analysed in detail. The computing theories of the normal section of bearing capacity for the eccentrically loaded columns were adopted to calculate the nominal bending strength of SRRC columns subjected to vertical axial force under lateral cyclic loads. The calculation formulas of horizontal bearing capacity for SRRC columns were proposed based on their nominal bending strength.

• 한국추진공학회지
• /
• 제25권2호
• /
• pp.88-97
• /
• 2021

가스터빈엔진의 제어기는 수출입 규제로 인하여 엔진 제작사로부터 기술이전이 불가능하여 가스터빈엔진의 독자개발을 위하여 자체 개발이 필요한 분야이다. 한국항공우주연구원에서는 엔진제어로직연구의 일환으로 소형 가스터빈엔진을 활용하여 고장탐구 연구를 진행하였다. 엔진의 지상 시험설비를 활용하여 정상상태에서의 엔진의 거동 및 성능을 분석한 후, 제어로직 분석시험 환경을 구축하여 엔진의 각종 고장을 모사한 후, 고장이 발생하였을 때, 해당 엔진이 정상상태와 어떻게 다르게 거동하는지 파악하고 이에 대하여 정리하였다. 이를 통하여 향후 엔진 제어기 관련 연구에서 엔진의 각종 이상 상태 발생 시의 제어로직 연구를 수행하는 데 있어 배경지식을 제공하고자 하였다.