• Korean Circulation Journal
• /
• 제52권12호
• /
• pp.878-886
• /
• 2022

Background and Objectives: Moderate aortic stenosis (AS) confers a surprisingly adverse prognosis, approaching that of severe AS. The objective of this study was to describe the clinical course of patients with moderate AS with evidence of concomitant heart failure manifesting as elevated brain natriuretic peptide (BNP) levels. Methods: This is a single-center, retrospective cohort study of 332 patients with elevated BNP. 165 patients with moderate AS were compared with 167 controls with none-mild AS. The Median follow-up duration was 3.85 years. The primary outcome was a composite endpoint of all-cause hospitalizations and all-cause mortality. Results: BNP levels were 530 and 515 pg/mL in the study and the control groups, respectively. Moderate AS had significantly higher rates of primary composite endpoint in both univariate analysis (hazard ratio [HR], 1.50; 95% confidence interval [CI], 1.14-1.97; p=0.004) and adjusted analysis (HR, 1.45; 95% CI, 1.05-2.01; p=0.02). Moderate AS had 1.41 (95% CI, 1.18-1.69; p<0.001) times more all-cause hospitalization per patient-year of follow-up compared to controls in the univariate model. After adjustment for significant covariates, moderate AS remained an independent predictor of all-cause hospitalizations (incidence rate ratio [IRR], 1.45; 95% CI, 1.18-1.79; p=0.005). Furthermore, moderate AS was significantly associated with higher all-cause hospitalization rates in both heart failure with reduced ejection fraction (IRR, 1.33; 95% CI, 1.02-1.75; p=0.038) and heart failure with preserved ejection fraction [IRR], 1.31; 95% CI, 1.03-1.67; p=0.026). Conclusions: Moderate AS in conjunction with elevated BNP portends a significantly worse prognosis than those without moderate AS and should be followed closely.

• Tribology and Lubricants
• /
• 제7권1호
• /
• pp.16-27
• /
• 1991

The mechanism of failure of lubricated surfaces at high sliding speeds was investigated. Experiments were performed with the ball-on-flat and cylinder-on-flat geometries, using lubricants of four different chemical reactivities. Surface failure was found to not be predictable using the ratio, $\lambda$, of fluid film thickness to composite surface roughness except when chemically inert lubricants are used. Even then the influence of temperature rise on fluid film thickness does not adequately explain the low load carrying capacity of lubricants at high sliding speeds, which causes surface failure. The protective layers on sliding surfaces that form by chemical reaction with the lubricant were found to reduce the surface roughening and increase the load carrying capacity of surfaces to values of $\lambda$ as low as 0.03. Neither the surface roughening nor the formation of the protective layers have been incorporated into failure models for lubricated systems.

• Journal of Chest Surgery
• /
• 제28권9호
• /
• pp.842-846
• /
• 1995

Recently, the trauma patients have been markedly increasing due to the vast increase of traffic accident, industrial disaster, incidental accident and violence. The authors have analysed of 22 patients of thoracic injuries combined with abdominal injuries and summarized as follows. The ratio of male to female was 3.4:1 and their age distribution was from 5 years to 68 years and mean age was 34.4 years. The etiologies of injury were traffic accident, stab wound, fall down and violence. Associated injuries were fractures, bowel perforation, kidney rupture, head injury, liver laceration, spleen rupture and so forth. The modes of treatment were closed thoracostomy, repair of diaphragm, ruptured bowel repair, explo-thoracotomy, splenectomy, hepatic lobectomy in this order of frequency. The postoperative complications were atelectasis, wound infection, pneumonia, empyema, acute renal failure, respiratory failure and bleeding. The mortality rate was 13.6% [3/22 and the causes of death were respiratory failure 1 case, acute renal failure 1 case and hypovolemic shock 1 case.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1999년도 봄 학술발표회 논문집(I)
• /
• pp.691-696
• /
• 1999

This paper is aimed to investigate flexural rehabilitation effect o pre-loaded reinforced concrete beams strengthened by carbon fiber sheet. Main Test parameters are reinforcement ratio and the magnitude of pro-loading and seven test beams are analyzed rehabilitation effect by carbon fiber sheet, load-deflection, failure mode, stress of reinforcing bar by the magnitude of pre-loading. Test results show that internal force was showed pre-loaded specimens lower than no-loaded specimens during rehabilitation and changing stiffness was showed in the same was and failure mode showed brittle failure from all specimens.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1988년도 한국자동제어학술회의논문집(국제학술편); 한국전력공사연수원, 서울; 21-22 Oct. 1988
• /
• pp.1055-1058
• /
• 1988

A systematic way of failure diagnosis in a linear system with decentralized estimators is developed. The generalized likelihood ratio (G.L.R) approach to failure detection and identification is used for designing a diagnosis system in each subsystem based on the innovation analysis. For the simplicity of the theoretical formulation, a design scheme of failure diagnosis is developed for the system decomposed into two subsystems. To demonstrate the effectiveness of our approach, several simulation studies have been carried out on a third-order linear system which is constructed of a second-order damped oscillator and a first-order lag.

• International Journal of Reliability and Applications
• /
• 제12권1호
• /
• pp.61-77
• /
• 2011

One of the most important problems in the estimation of the parameter of the failure model, is the cost of experimental sampling units, which can be reduced by using any prior information available about ${\theta}$, and devising a two-stage pooling shrunken estimation procedure. We have proposed an estimator of the reliability function (R(t)) of the exponential model using two-stage time censored data when a prior value about the unknown parameter (${\theta}$) is available from the past. To compare the performance of the proposed estimator with the classical estimator, computer intensive calculations for bias, mean squared error, relative efficiency, expected sample size and percentage of the overall sample size saved expressions, were done for varying the constants involved in the proposed estimator (${\tilde{R}}$(t)).

• 한국생산제조학회지
• /
• 제19권6호
• /
• pp.804-811
• /
• 2010

The fatigue crack propagation is stochastic in nature, because the variables affecting the fatigue behavior are random and have uncertainty. Therefore, the fatigue life prediction is critical for the design and the maintenance of many structural components. In this study, fatigue experiments are conducted on the specimens of magnesium alloy AZ31 under various conditions such as thickness of specimen, the load ratio and the loading condition. The probability distribution fit to the fatigue failure life are investigated through a probability plot paper by these conditions. The probabilities of failure at various conditions are also estimated. The fatigue design life is predicted by using the Weibull distribution.

• 한국자동차공학회논문집
• /
• 제8권1호
• /
• pp.183-190
• /
• 2000

The objective of this work is to develop a criterion for predicting the failure strength of the joints bonded by ductile adhesives. To obtain a criterion, first, fracture tests were carried out for T-peel joint and Single-lap joint with widely differing joints geometries. Then using the fracture loads obtained at tests, the finite element analysis were performed, in which the stresses in the adhesive bonds were calculated in great detail. After examining four epoxy adhesives, it is concluded that the fracture of adhesively bonded joint occurs when the maximum of the ratio of the mean to effective stresses exceeds a constant value which can be determined from analysis and test for each adhesive.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1999년도 춘계학술대회 논문집
• /
• pp.157-160
• /
• 1999

The paper provides the results of failure analysis for the porcelain suspension insulators. The comparisons of characteristics were made as a function of failed and unfailed isulators which had been used in real distribution line. This paper also described the failure modes which could be occurred in the fields. The cracks inside cap were detected though measuring the resistance or the leakage current. The ratio of open porosity was calculated from the Archimedes Method. The failure analyses of porcelain suspension insulators were conducted from the various analysis method.

• 한국조리학회지
• /
• 제13권1호
• /
• pp.152-165
• /
• 2007

The purpose of this study is to prove that the appropriate fit between service failure and recovery strategy can efficiently maximize customer satisfaction and behavioral intention, by using the prepared scenario through comprehensive approach concerning how the expectation level of service recovery has influence on perceived fairness, satisfaction and behavioral intention of service recovery based upon size in case of service failure. This study has been conducted by way of selection of filling-up type questionnaires for customers themselves who have experience in service failure out of customers who can easily visit family and hotel restaurants, that is, domestic restaurants in Seoul area, $June{\sim}August$ 2004, by setting factorial design of 2(control, severeness)$\times$3(distributive fairness, procedural fairness, mutual relational fairness)$\times$2(customer satisfaction, customer behavior). The survey was performed on the customers who visited common restaurants, family restaurants, hotel restaurants, etc. mainly in Seoul, and total 600 sheets of questionnaires were distributed and 496 sheets of them were returned(82.67% of return ratio). Research findings are as follows; First, perceived recovery justice has an effect on customer satisfaction and behavioral intention. Second, customer satisfaction and restaurant satisfaction have positive influence on behavioral intention. The results will be helpful for them to develop a further service failure and recovery framework. For service marketing managers, the results will suggest specific guidelines for establishing service recovery strategies.