• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2007년도 제38회 하계학술대회
• /
• pp.97-98
• /
• 2007

A wide range of data is available as too causes of large power transformers. Although the percentage of transformer component failure rates vary, all data shows that the top three failure mechanisms are Load Tap Changers (LTC), Bushings and Windings. To date, the most common methods employed to determine the health of a transformer are off line tests and online temperature monitoring, winding hotspot calculations and dissolved gas analysis.

• Radiation Oncology Journal
• /
• 제36권3호
• /
• pp.182-191
• /
• 2018

Purpose: To investigate the clinical outcome of proton therapy (PT) in patients with chordoma. Materials and Methods: Fifty-eight patients with chordoma treated with PT between June 2007 and December 2015 at the National Cancer Center, Korea, were retrospectively analyzed. The median total dose was 69.6 cobalt gray equivalent (CGE; range, 64.8 to 79.2 CGE). Local progression-free survival (LPFS), distant metastasis-free survival (DMFS), overall survival (OS), and disease-specific survival (DSS) rates were calculated by the Kaplan-Meier method. Results: With the median follow-up of 42.8 months (range, 4 to 174 months), the 5-year LPFS, DMFS, OS, and DSS rates were 87.9%, 86.7%, 88.3%, and 92.9%, respectively. The tumor location was associated with the patterns of failure: the LPFS rates were lower for cervical tumors (57.1%) than for non-cervical tumors (93.1%) (p = 0.02), and the DMFS rates were lower for sacral tumors (53.5%) than for non-sacral tumors (100%) (p = 0.001). The total dose was associated with both the LPFS rate and DMFS rate. The initial tumor size was associated with the DMFS rate, but was not associated with the LPFS rate. Three patients had grade 3 late toxicity with none ≥grade 4. Conclusion: PT is an effective and safe treatment in patients with chordomas. The tumor location was associated with the patterns of failure: local failure was common in cervical tumors, and distant failure was common in sacral tumors. Further refinement of PT, such as the utilization of intensity modulated PT for cervical tumors, is warranted to improve the outcome.

• 융합정보논문지
• /
• 제12권5호
• /
• pp.15-20
• /
• 2022

본 연구는 소프트웨어 품질 특성인 기능적합성, 신뢰성, 사용성, 이식성, 유지보수성, 성능효율성, 보안성, 호환성 중에서 신뢰성에 대한 평가 방안을 연구하였다. 소프트웨어 품질 측정에 있어 신뢰성의 정량적 평가 방안을 제시한다. 본 연구는 소프트웨어 품질 특성 중 하나인 신뢰성 평가 중 성숙성에 포함되는 고장률을 측정하는 방법에 대해서 소개하고 고장 데이터의 형태에 따라 고장률이 어떻게 변화하는지에 대해 실험데이터를 가지고 연구한 내용이다. 소프트웨어 테스팅을 중심으로 매일의 고장 수를 중심으로 소프트웨어 신뢰성 성장 모델에 적용하여 고장률을 측정하여 고장 데이터의 형태에 따라 비교 분석하였다. 6일간의 테스트를 통해서 발견된 고장 시간을 중심으로 고장률을 측정하고 측정결과를 이용해서 국제표준 ISO/IEC 25023에서 제시하고 있는 고장률과 비교 하였으며 데이터 형태에 따라 적용방안을 검토하였다.

• 재무관리논총
• /
• 제6권1호
• /
• pp.313-334
• /
• 2000

In this paper, we obtained some supportive evidence for the long-run PPP relationship concerning the Korean Won currency. Previous tests of PPP in the bilateral exchange rates of the Korean Won rate vis-a-vis the U.S. Dollar have been exposed to the lack of power problem. We argue that their failure to find PPP relation in Korean Won rates was due to the low power of Augmented Dickey-Fuller tests or the Engle-Granger two-step tests applied to the Korean exchange rate data with short sample period. En attempting to alleviate this low power problem, we used the error-correction model test and the Johansen test for bilateral long-run equilibrium relationships between exchange rates and price indices from Korea's major trading partners. It is surprising that our evidence supporting for long-run PPP in Korean Won rate contrasts sharply with Bahmani-Oskooee, Moshen and Rhee, Hyun-Jae(1992)'s.

• 한국신뢰성학회지:신뢰성응용연구
• /
• 제16권2호
• /
• pp.98-103
• /
• 2016

Purpose: The purpose of this paper is to get a meaningful information for improving manufacturing quality of the products before they are produced in client's manufacturing process. Methods: A variety of data mining techniques have been being used for wide range of industries from process data in manufacturing factories for quality improvement. One application of those is to get meaningful information from process data in manufacturing factories for quality improvement. In this paper, the failure rate at client's manufacturing process is predicted by using the parameters of the characteristics of the product based on PCA (Principle Component Analysis) and regression analysis. Results: Through a case study, we proposed the predicting methodology and regression model. The proposed model is verified through comparing the failure rates of actual data and the estimated value. Conclusion: This study can provide the guidance for predicting the failure rate on the manufacturing process. And the manufacturers can prevent the defects by confirming the factor which affects the failure rate.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 하계학술대회 논문집 E
• /
• pp.2377-2379
• /
• 1999

In order to analyze failure rates of underground transmission power cable systems in Korea, the survey has been performed for the failure cases of cables, joints, and terminations in CV, OF and POF cable systems which occurred from 1983 to 1998. During 16 years, the failure cases due to trips of the systems were 47 among the total 108 cases, These 47 cases could be divided into internal reasons(manufacture/installation, corrosion and degradation) of 16 cases and external reasons (external mechanical damages, lightning, fire. etc.) of 31 cases. For the 154 kV cable systems during 12 years from 1987 to 1998, total failure rate was 0.0057 [case/100C-km/year] and internal reason failure rate was 0.0020 [case/100C-km/Year], which is similar to those of foreign countries. Also, the many cases of internal reason failures occurred in the early stage after the operations due to incorrect installations. This implies that the installation process is very important and some diagnostic tests such as PD measurement are needed besides after laying test.

• Journal of Korean Neurosurgical Society
• /
• 제63권3호
• /
• pp.397-405
• /
• 2020

Objective : We retrospectively evaluated the efficacy of Gamma Knife radiosurgery (GKS) for recurrent nasopharyngeal carcinoma (NPC) in patients who previously underwent radiotherapy, and analyzed the treatment outcomes over 14 years. Methods : Ten patients with recurrent NPC who had previously received radiotherapy underwent stereotactic radiosurgery using a Gamma Knife^® (Elekta Inc, Atlanta, GA, USA) between 2005 and 2018. The median target volume was 8.2 ㎤ (range, 1.7-17.8), and the median radiation dose to the target was 18 Gy (range, 12-30). The median follow-up period was 18 months (range, 6-76 months). Overall and local failure-free survival rates were determined using the Kaplan-Meier method. Results : The NPCs recurred at the primary cancer site in seven patients (70%), as distant brain metastasis in two (20%), and as an extension into brain in one (10%). The recurrent tumors in seven of the 10 patients (70%) were found on the routine follow-up imaging studies. Two patients presented with headache and one with facial pain. Local failure after GKS occurred in five patients (50%) : two of whom died eight and 6 months after GKS, respectively. No adverse radiation effects were noted after GKS. The 1- and 3-year overall survival rates after GKS were 90% and 77%, respectively. The local failure-free survival rates at 6 months, 1 year, and 3 years after GKS were 80%, 48%, and 32%, respectively. The median interval from GKS to local failure was 8 months (range, 6-12). Univariate analysis revealed that using co-registration with positron emission tomography-computed tomography (PET-CT) and magnetic resonance imaging (MRI) was associated with a lower local failure rate of recurrent NPC (p=0.027). Conclusion : GKS is an acceptable salvage treatment option for patients with recurrent NPC who previously received radiation therapy. PET-CT and MRI co-registration for dose planning can help achieve local control of recurrent NPC.

• Composites Research
• /
• 제16권5호
• /
• pp.45-53
• /
• 2003

본 논문에서는 이차 본딩으로 접착된 복합재료-복합재료 Single-Lap 조인트 시편에 대해 인장 시험 및 수치해석을 통해 그 파손 특성을 조사하였다. 시편시험에서는 시험 중에 CCD 카메라 및 AE 센서를 이용해 초기 균열의 발생 및 진전양상에 대한 시험적인 관찰을 수행하였다. 시편에 대해 기하비선형 유한요소해석 및 VCCT(Virtual Crack Closure Technique)기법을 이용해 시편의 거동 및 변형율에너지방출률을 계산하고 세 가지 관찰된 초기 균열 모드에 대해 파손강도를 계산하였다. 인장시험에서 초기 균열은 모서리 계면 균열, 측면 계면 균열 및 층간 분리 균열의 세 가지 형태로 최종 파손의 60∼90% 하중에서 발생하였다. 주된 파손 모드는 접착제 계면 파손(adhesive failure) 및 적층판의 첫 번째 및 두 번째의 층간 분리 파손이었다. 두꺼운 접착제 층을 갖는 시편들은 초기균열이 낮은 하중에서 발생하였지만 균열진전에 대한 저항성 및 파손하중은 높게 나타났다. 층간분리파손은 주로 두꺼운 접착제의 경우에 발생하였다. 세 가지 초기 균열 모드에 대해 변형률에너지방출률은 Mode I의 G값이 Mode II의 G값보다 크게 계산되었다. Mode I 및 전체 G값은 측면 계면 균열, 모서리 계면 균열, 층간분리 균열의 순서로 크게 계산되었다.

• 한국정보전자통신기술학회논문지
• /
• 제9권4호
• /
• pp.351-358
• /
• 2016

과학기술이 급속하게 발전함에 따라 더 강력한 소프트웨어 기능의 급속한 발전과 함께 소프트웨어의 복잡성이 크게 증가함으로써 소프트웨어 테스트 및 신뢰성 평가의 어려움이 증가하고 있다. 소프트웨어 고장분석을 위한 비동질적인 포아송 과정에서 결함당 고장발생률이 상수이거나, 단조 증가 또는, 단조 감소하는 패턴을 가질 수 있다. 본 논문에서는 결함의 기대값을 가정하는 유한고장 소프트웨어 NHPP 모형과 수리시점에서도 고장이 발생할 상황을 반영하는 무한고장 NHPP 모형들을 상호 비교 제시하였다. 소프트웨어 신뢰성 분야에서 많이 사용되는 어랑분포에 근거한 유한고장과 무한고장 소프트웨어 신뢰성 모형에 대한 신뢰도 성능을 비교 분석하였다. 그 결과 유한고장 모형이 무한고장 모형보다 효율적으로 좋게 나타났으며, 이 과정에서 모수추정법은 최우추정법을 이용하였다. 본 연구결과를 통하여 소프트웨어 개발자들에게 소프트웨어 고장현상을 파악하는데 도움을 줄 수 있을 것으로 판단된다.

• 한국도서관정보학회지
• /
• 제22권
• /
• pp.139-169
• /
• 1995

The purpose of this study is to analyze the search pattern and search outcome of the National Central Library OPAC users by measuring their success rates and identifying the factors of failure and the personal background which bring about the differences of the search outcome. Various methods have been used for the study. Personal interview was used to find the pattern of the search, observation method was used to investigate the search process and the failure factors, and a questionnaire was used to survey personal background of searchers. The data were collected during the period of 7 days from April 17, 1995 through April 23, 1995. The search of 1, 217 cases, sampling systematically 25% out of the whole users, were collected and analyzed for the study. The findings of the study can be summarized as follows : First, in regard to the pattern, known-item search(72.6%) was preferred to the subject search(27.4%) and in case of known-item search the access point used were in the order of title, author, title and author. Second, the overall success rate of known-item search was 50.3% and the success rates were in order of author and date, title, and author. The failure factors of known-item search were divided into users factor of 67% and the database factor of 33%, respectively. Third, in case of subject search, its overall success rate was 44.1% and the keyword was the major access point, and the average of precision ratio was very low. Fourth, the analysis of the personal background related to the search outcome has shown significant differences by sex, the experience of using OPAC, education level, and the frequency of using other information retrieval systems. Based on the results the following suggestions can be made to improve the search outcome : First, the system should be su n.0, pplemented online help function to assist users to overcome the failure during search. Second, user instruction in group or individual should be implemented for the users to understand the system.