• 대한인간공학회지
• /
• 제26권4호
• /
• pp.65-73
• /
• 2007

This study evaluated the short message service (SMS) and multimedia message service (MMS) usability of mobile phones and wireless internet services by performance failure rates and flowcharts that adopted the concept of state diagrams. Forty-eight participants who had an experience of using mobile phones were recruited by posting an advertisement on websites for the experiment. They carried out both SMS and MMS tasks with the mobile phones of LG Cyon and Samsung Anycall as well as the wireless internet services of LGT ez-i, KTF magicN, and SKT NATE. In general, Cyon had the lower performance failure rate than Anycall for SMS, and ez-i had the lowest performance failure rate than the other services for MMS. More specifically through the workflow analysis, most participants used hot keys to take 7-8 steps to send a SMS including a symbol and had a difficulty in typing the symbol. They also took 10-11 steps to send a MMS after taking and attaching two pictures. Anycall, magicN, and NATE had significantly large error and failure rates due to the limited option of the menu paths that users could take and poor compatibilities of menu names and between menu and navigation keys. This study showed the possibility of use of flowcharts for systematic and specific usability evaluation methods and found the causes of performance errors and failures with mobile phones and wireless internet services to provide insight into their design.

• Clinical and Experimental Reproductive Medicine
• /
• 제48권3호
• /
• pp.203-210
• /
• 2021

We performed a systematic review and meta-analysis to evaluate whether intralipid administration improved the outcomes of in vitro fertilization. Online databases (PubMed, Cochrane Library, Medline, and Embase) were searched until March 2020. Only randomized controlled trials (RCTs) that assessed the role of intralipid administration during in vitro fertilization were considered. We analyzed the rates of clinical pregnancy and live birth as primary outcomes. Secondary outcomes included the rates of chemical pregnancy, ongoing pregnancy, and missed abortion. We reviewed and assessed the eligibility of 180 studies. Five RCTs including 840 patients (3 RCTs: women with repeated implantation failure, 1 RCT: women with recurrent spontaneous abortion, 1 RCT: women who had experienced implantation failure more than once) met the selection criteria. When compared with the control group, intralipid administration significantly improved the clinical pregnancy rate (risk ratio [RR], 1.48; 95% confidence interval [CI], 1.23-1.79), ongoing pregnancy rate (RR, 1.82; 95% CI, 1.31-2.53), and live birth rate (RR, 1.85; 95% CI, 1.44-2.38). However, intralipid administration had no beneficial effect on the miscarriage rate (RR, 0.75; 95% CI, 0.48-1.17). A funnel plot analysis revealed no publication bias. Our findings suggest that intralipid administration may benefit women undergoing in vitro fertilization, especially those who have experienced repeated implantation failure or recurrent spontaneous abortion. However, larger, well-designed studies are needed to confirm these findings.

• Journal of Chest Surgery
• /
• 제57권2호
• /
• pp.184-194
• /
• 2024

Background: Left ventricular assist devices (LVADs) are widely employed as a therapeutic option for end-stage heart failure. We evaluated the outcomes associated with centrifugal-flow LVAD implantation, comparing 2 device models: the Heartmate 3 (HM3) and the Heartware Ventricular Assist Device (HVAD). Methods: Data were collected from patients who underwent LVAD implantation between June 1, 2015 and December 31, 2022. We analyzed overall survival, first rehospitalization, and early, late, and LVAD-related complications. Results: In total, 74 patients underwent LVAD implantation, with 42 receiving the HM3 and 32 the HVAD. A mild Interagency Registry for Mechanically Assisted Circulatory Support score was more common among HM3 than HVAD recipients (p=0.006), and patients receiving the HM3 exhibited lower rates of preoperative ventilator use (p=0.010) and extracorporeal membrane oxygenation (p=0.039). The overall early mortality rate was 5.4% (4 of 74 patients), with no significant difference between groups. Regarding early right ventricular (RV) failure, HM3 implantation was associated with a lower rate (13 of 42 [31.0%]) than HVAD implantation (18 of 32 [56.2%], p=0.051). The median rehospitalization-free period was longer for HM3 recipients (16.9 months) than HVAD recipients (5.3 months, p=0.013). Furthermore, HM3 recipients displayed a lower incidence of late hemorrhagic stroke (p=0.016). In the multivariable analysis, preoperative use of continuous renal replacement therapy (odds ratio, 22.31; p=0.002) was the only significant predictor of postoperative RV failure. Conclusion: The LVAD models (HM3 and HVAD) demonstrated comparable overall survival rates. However, the HM3 was associated with a lower risk of late hemorrhagic stroke.

• 대한치과의사협회지
• /
• 제47권12호
• /
• pp.823-829
• /
• 2009

Purpose : The aim of this study was to evaluate the survival rate of sintered porous-surfaced implants placed in the edentulous posterior mandibles, in relation to implant length and diameter, crown-to-implant ratio, and types of prostheses, for a maximum of eight years of functioning. Material and Methods : The study group consisted of 43 partially edentulous patients who visited Catholic University Hospital of Daegu and one private dental clinic. A total of 122 sintered porous-surfaced implants n $Endopore^{(R)}$ (Inn ova Life Sciences, Toronto, Ontario, Canada) -- were placed in the edentulous posterior mandibles, Two diameter sizes (4.1 mm and 5.0 mm) and four lengths (5.0 mm, 7.0 mm, 9.0 mm, and 12.0 mm) were used. One hundred and three implants were splinted and 21 implants were nonsplinted. The survival rates of the implants in relation to length, diameter, crown-to-implant ratio, and types of prostheses were investigated. Statistical data were analyzed using SPSS Win.Ver 14.0 software with the Chi-square test. Results : The survival rate of the 4.1mm diameter implants was 100% and 91.2% for the 5.0mm diameter implants. The survival rates of the implants of differing diameters were found to be statistically different (p=0.005). The survival rates of both the 5.0mm and 7.0 mm length implants were 100%. The survival rate of the 9.0mm length implants was 97.9% and for the 12.0mm length implants was 95.1%. There was no statistical difference in survival rates for the differing lengths of implants. Of the 103 prostheses that were splinted, the survival rate was 98.0%. The survival rate of splinted prostheses was higher than that of the non-splinted prostheses, but was found to be not statistically different. There were no failed cases when the crown-to-implant ratio was under 1.0. When the crown-to-implant ratio was between 1.0 and 1.5, the failure rate of the implants was 6.7%. No failure was recorded with the ratio range of 1.5 to 2.0. Relative to the crown-to-implant ratio of 1.0, the failure rates were statistically different (p=0.048). Discussion and Conclusion : The cumulative survival rate of the porous-surfaced implants placed in the edentulous posterior mandibles was 97.5%. Short porous-surfaced implants showed satisfactory results after a maximum of nine years of functioning in the edentulous posterior mandibles.

• Clinical and Experimental Reproductive Medicine
• /
• 제20권1호
• /
• pp.45-51
• /
• 1993

Micromanipulation procedures have been used to improve fertilization rates in patients with male factor or with unexplained infertility. Partial zona disseetion(PZD), a method using mechanical force to open the zona pellucida increase the chances of fertilization. The purpose of this study is to increase rates of fertilization and pregnacy in the ART program by using PZD. The influence of PZD on the fertilization rate was investigated in 57 couples with semen defects, antisperm antibodies(ASA), or unknown factors. PZD directly performed in 35 couples with a history of fertilization failure in previous cycle (Group 1), and PZD applied in 22 couples with the failure of initial fertilization in the same cycle (Group 2). The fertilization rates of the male facor, ASA positive factor and unknown factor in Group 1 were 37.6%, 20.0% and 59.2%, respectively. The rates of fertilization of male factor, ASA positive factor and unknown factor in Group 2 were 34.8%, 20.0% and 26.5%, respectively. The incidences of polyspermy in Group 1 and Group 2 were 5.9% and 9.0%, respectively. Among 35 patients of Group 1, one patient was pregnant and successfully delivered, whereas 1 of 22 patients of Group 2 became pregnant, but aborted at 7 weeks.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• 제41권5호
• /
• pp.240-245
• /
• 2015

Objectives: This study was performed to evaluate patterns of failure time after insertion, failure rate according to loading time after insertion, and the patterns of failure after loading. Materials and Methods: A total of 331 mini-implants were classified into the non-failure group (NFG) and failure group (FG), which was divided into failed group before loading (FGB) and failed group after loading (FGA). Orthodontic force was applied to both the NFG and FGA. Failed mini-implants after insertion, ratio of FGA to NFG according to loading time after insertion, and failed mini-implants according to failed time after loading were analyzed. Results: Percentages of failed mini-implants after insertion were 15.79%, 36.84%, 12.28%, and 10.53% at 4, 8, 12, and 16 weeks, respectively. Mini-implant failure demonstrated a peak from 4 to 5 weeks after insertion. The failure rates according to loading time after insertion were 13.56%, 8.97%, 11.32%, and 5.00% at 4, 8, 12, and 16 weeks, respectively. Percentages of failed mini-implants after loading were 13.79%, 24.14%, 20.69%, and 6.9% at 4, 8, 12, and 16 weeks, respectively. Conclusion: Mini-implant stability is typically acquired 12 to 16 weeks after insertion, and immediate loading can cause failure of the mini-implant. Failure after loading was observed during the first 12 weeks.

• Journal of Periodontal and Implant Science
• /
• 제52권3호
• /
• pp.230-241
• /
• 2022

Purpose: The purpose of this study was to evaluate failed implants and reimplantation survival and to identify the relative risk factors for implant re-failure. Methods: Ninety-one dental implants were extracted between 2006 and 2020 at the National Health Insurance Service Ilsan Hospital, including 56 implants in the maxilla and 35 implants in the mandible that were removed from 77 patients. Patient information (e.g., age, sex, and systemic diseases) and surgical information (e.g., the date of surgery and location of the implants and bone grafts) were recorded. If an implant prosthesis was used, prosthesis information was also recorded. Results: In total, 91 first-time failed dental implants in 77 patients were analyzed. Of them, 69 implants in 61 patients received reimplantation after failure. Sixteen patients (22 implants) refused reimplantation or received reimplantation at a different site. Eight of the 69 reimplants failed again. The 1-year survival rate of the 69 reimplants was 89.4%. Age at reimplantation and smoking significantly increased the risk of reimplantation failure. However, a history of taking anti-thrombotic agents showed a statistically significant negative association with reimplantation failure. Of the failed implants, 66% showed early failure and 34% showed late failure of the initial implantation. All 8 re-failed implants showed early failure. Only 3 of these 8 failed reimplants were re-tried and the second reimplants all survived. Conclusions: The total survival rate of implants, which included reimplants and second reimplants was 99.2%, although the survival rate of the initial implantations was 96.3%. Previous failure did not affect the success of the next trial. Reimplantation failure was more strongly affected by patient factors than by implant factors. Therefore, each patient's specific factors need to be meticulously controlled to achieve successful reimplantation.

• 한국가스학회지
• /
• 제21권4호
• /
• pp.16-20
• /
• 2017

현재의 유지보수 시스템은 고정 설비 및 회전기계의 유지 및 보수에 대한 명확한 기준이 제시되지 않고 있으며, 고장이 발생되더라도 근본적인 원인분석 없이 교체 및 수리가 이루어져 더 큰 사고를 초래할 수 있는 환경이다. 따라서 본 연구에서는 예방보전을 통해 사전에 점검하고 유지 보수할 수 있도록 신뢰성 중심의 유지보수 시스템의 절차를 개발하였고, 향후 유지보수에서 설비의 고장형태에 따라 문제 발생 설비를 집중 관리함으로써 중대산업사고의 발생을 사전에 예방하고 관리할 수 있는 절차를 제시하고자 하였다.

• 디지털산업정보학회논문지
• /
• 제10권2호
• /
• pp.29-36
• /
• 2014

Finite failure NHPP software reliability models presented in the literature exhibit either constant, monotonic increasing or monotonic decreasing failure occurrence rates per fault. In this paper, proposes the Gompertz distribution reliability model, which made out efficiency application for software reliability. Algorithm to estimate the parameters used to maximum likelihood estimator and bisection method, model selection based on mean square error (MSE) and coefficient of determination$(R^2)$, for the sake of efficient model, was employed. Analysis of failure using real data set for the sake of proposing fixed shape parameter of the Gompertz distribution was employed. This analysis of failure data compared with the Gompertz distribution model of shape parameter. In order to insurance for the reliability of data, Laplace trend test was employed. In this study, the proposed Gompertz model is more efficient in terms of reliability in this area. Thus, Gompertz model can also be used as an alternative model. From this paper, software developers have to consider the growth model by prior knowledge of the software to identify failure modes which can was helped.

• 전기학회논문지
• /
• 제62권9호
• /
• pp.1335-1342
• /
• 2013

Subway is electrified railway system nowadays, in which liquid dielectric transformers have been widely used, though mold type transformers are replacing it. The transformers supplies large electric power and have innate hazards causing accidents under operation. A number of researcher have carried out on failures of it and have oriented to identify transformer's failure causes and how to maintain it healthy state. The transformer failures can cause serious accidents which can provoke economic loss and leads persons to kill. In this paper, we carried out a safety activity to reveal hazards and to estimate risk of subway liquid dielectric transformers using FMEA, HAZOP and What-if methods. In case of installing safety devices in oil immersed transformer, we tried to evaluate an effect on a subsystem's failure rate. We proposed how to design subsystem failure rate and safety device failure rates.