• Pediatric Infection and Vaccine
• /
• 제15권2호
• /
• pp.93-99
• /
• 2008

Fluoroquinolone은 Nalidixic acid가 개발된 이래로 광범위한 항균효과, 조직 내로의 우수한 침투성, 투여의 편이성 등으로 널리 사용되고 있다. 이러한 장점에도 불구하고 소아의 경우 동물연구에서 보인 연골 및 관절의 손상과 항생제 내성 증가의 우려 등으로 인해 그 사용이 제한되어 왔다. 그러나, 최근 몇몇 질환을 대상으로 소아에서 그 사용이 증가하고 있다. 반면 아직까지 이에 따른 연골 및 관절의 손상은 뚜렷한 연관성을 보이지 않고 있다. 그러나, 소아에서의 일반적 사용을 위해서는 추가적인 연구가 필요한 상태이다. 소아의 경우 fluoroquinolone 투여는 일차 항생제의 치료 실패 및 대체 가능한 항생제가 없는 경우에 한해 조심스럽게 투여하는 것이 바람직한 것으로 사료된다.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2017년도 춘계 학술논문 발표대회
• /
• pp.254-255
• /
• 2017

The aim of this study is to investigate the impact resistant performance of steel short fiber-reinforced cement based composites (SFRCCs) containing 1.0, 1.5, 2.0 and 3.0% volume fraction of steel short fibers subjected to high velocity impact of steel projectile (the diameter of 19.05mm and the mass of 28.13g). The gunpowder impact facility was used for impact tests, and the impact velocity was from about 350 to 700m/s. The specimens were damaged in various failure modes, which are penetration, scabbing, and perforation. Comparing with Plain specimen, SFRCCs have superior capacity on the scabbing limit, and slightly bulged in the back side under the impact velocity of 700m/s. In addition, the impact resistant performance of SFRCCs improved with increase of steel short fiber volume ratio. The fibers play an important role in controlling the local damage of SFRCCs.

• 전기학회논문지
• /
• 제60권3호
• /
• pp.465-470
• /
• 2011

Recently fault currents are increasing in a network. It is caused by increase in electric demand and high penetration of distributed generation with renewable energy sources. Moreover, distribution network has become more and more complex as mesh network to improve the distribution system reliability and increase the flexibility and agility of network operation. Accordingly, the fault current will exceed capacity of circuit breakers soon and all the various rational solutions to solve this problem are taken into account. Under these circumstances, superconducting fault current limiter(SFCL) is a new alternative in the viewpoint of technical and economic aspects. This study presents operation processes for a resistive-type of SFCL, and it proposes reliability model for the SFCL. When a SFCL is installed into a network, the contribution of decreased fault currents to failure for distribution equipments can be quantified. As a result, it is expected that a SFCL makes the reliability of adjacent equipments on existing network improve and these changes are analyzed. We propose a methodology to evaluate the reliability in the distribution network where a SFCL is installed considering a reliability model for resistive-type of SFCL and reliability changes for adjacent equipments which are proposed in this paper.

• Nuclear Engineering and Technology
• /
• 제53권3호
• /
• pp.833-841
• /
• 2021

During the postulated severe accident of nuclear reactor, eutectic reaction leads to low-temperature melting of fuel cladding and early failure of core structure. In order to model eutectic melting with the moving particle semi-implicit (MPS) method, the eutectic reaction model is developed to simulate the eutectic reaction phenomenon. The coupling of mass diffusion and phase diagram is applied to calculate the eutectic reaction with the uniform temperature. A heat transfer formula is proposed based on the phase diagram to handle the heat release or absorption during the process of eutectic reaction, and it can combine with mass diffusion and phase diagram to describe the eutectic reaction with temperature variation. The heat transfer formula is verified by the one-dimensional melting simulations and the predicted interface position agrees well with the theoretical solution. In order to verify the eutectic reaction models, the eutectic reaction of uranium and iron in two semi-infinite domains is simulated, and the profile of solid thickness decrease over time follows the parabolic law. The modified MPS method is applied to calculate Transient Reactor Test Facility (TREAT) experiment, the penetration rate in the simulations are agreeable with the experiment results. In addition, a hypothetical case based on the TREAT experiment is also conducted to validate the eutectic reaction with temperature variation, the results present continuity with the simulations of TREAT experiment. Thus the improved method is proved to be capable of simulating the eutectic reaction in the severe accident.

• 소성∙가공
• /
• 제20권3호
• /
• pp.214-221
• /
• 2011

In recent years, automotive seat components have been manufactured by the fine blanking process, allowing an improvement of dimensional accuracy at sheared surface in series production. However, the rollover has increased and die failures have occurred more frequently when manufacturing gears by fine blanking. Consequently, important goals for manufacturing seat recliner parts with gears have been to decrease the rollover as well as to improve the tool life. In this study, the half blanking and shaving processes were introduced to improve aforementioned problems for the lower tooth, the main component of a seat recliner. For this purpose, the half blanking process was optimized using the finite element (FE) analysis and design of experiment (DOE). The optimized conditions resulting from this study were an offset of 0.2 mm, a clearance of 0.1 mm and a penetration depth of 4.5 mm. Fine blanking experiment conducted under the optimal condition resulted in a rollover depth decrease from 1.9 to 1.3 mm, and no die failure occurrence.

• 대한토목학회논문집
• /
• 제3권1호
• /
• pp.43-51
• /
• 1983

아스팔트혼합물(混合物)에 대한 실내피로시험결과(室內疲勞試驗結果)로부터 아스팔트포장(鋪裝)의 수명예측(壽命豫測)을 위한 피로파괴포락선(疲勞破壞包絡線)을 구(求)하였다. 피로파괴포락선(疲勞破壞包絡線)은 시험온도(試驗溫度)나 재하속도(載荷速度)에 거의 의존(依存)하지 않았으며, 아스팔트의 형상(形狀)에 따라 크게 변하였다. 밀립도(密粒度)아스팔트 콘크리트의 경우 피로파괴포락선(疲勞破壞包絡線)은 아스팔트의 침입도(針入度)에 관계없이 거의 한 개의 곡선군(曲線群)을 이루었다. 아울러 얻어진 피로파괴포락선(疲勞破壞包絡線)과 Burmister의 3 층(層) 탄서이론(彈性理論)에 의한 실제포장(實際鋪裝)의 피로수명예측법(疲勞壽命豫測法)을 제시(提示)하였다.

• 한국도로학회논문집
• /
• 제11권3호
• /
• pp.33-40
• /
• 2009

폐타이어 고무분말은 도로 유지 및 보수제로 아스팔트 바인더의 개질제로 사용되고 있다. 도로보수제인 폐타이어 고무분말 개질 아스팔트 (crumb rubber modified asphalt, CRMA) 실란트에 필요한 접착특성은 저온에서 아스팔트 바인더의 취성과 접착파괴특성 때문에 주목받고 있다. 본 연구에서는 저온에서 CRMAs의 개질제로서 유연제의 영향을 조사하였다. 저온에서 CRMAs의 특성은 침입도, 연화점, 인장 및 인장접착시험을 통하여 측정하였다. 유연제를 도입한 CRMAs에서 CR과 아스팔트바인더의 연성변형이 증가함에 따라 인장접착강도와 변형률이 증가하였다. 저온영역에서 CRMAs의 인장특성과 접착특성은 유연제의 함량이 중요한 요소임을 발견하였다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집A
• /
• pp.407-412
• /
• 2001

In this research, damage behavior of singly oriented ply (SOP) fiber metal laminate (FML) subject to concentrated load was studied. The static indentation tests were conducted to study fiber orientation effect on damage behavior of FML. During the static indentation tests, Acoustic Emission technique (AE) was adopted to study damage characteristics of FML. AE signals were obtained by using AE sensor with 150kHz resonance frequency and the signals were compared with indentation curves of FML. As fiber orientation angle increases, the crack initiation load of SOP FML increases because the stiffness induced by fiber orientation is increased. The penetration load of SOP FML is influenced by the deformation tendency and boundary conditions. Cumulative AE counts were well predicted crack initiation and crack propagation and AE amplitude were useful for prediction of damage failure mode. During the matrix cracking, fiber debonding and fiber breakage, AE amplitude has $45{\sim}60dB,\;60{\sim}80dB\;and\;90{\sim}100dB$, respectively.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2010년도 춘계학술대회 논문집
• /
• pp.664-670
• /
• 2010

The study on mechanical behavior of the structure at the site includes experimental method and numerical analysis method. Experimental method is categorized into true-scale test and laboratory model test. A laboratory model test is to monitor the failure mechanism with a model simulated similar with a real ground so as to identify the quantitative result, while a true-scale model test is the approach which enables to identify the potential problems that may occur with a simulated construction situation similar with a real site circumstance. Thus this study was intended to carry out the experimental test of non open-cut excavation by pipe roof method which is mostly common in domestic sites. as well as was aimed at identifying the ground behavior occurred during pipe penetration using laboratory model test. Appropriate reduced-scale model was selected, taking into account of domestic geological characteristics and operation characteristics of traditional and high-speed rail trains and the qualitative evaluation of displacement was carried out based on a certain ground loss volume depending on excavation after categorizing trackbed settlement pattern by depth of top soil.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제23권3호
• /
• pp.263-269
• /
• 2001

하순 및 하악골 정중열은 매우 드문 선천성 기형으로 , 하순절흔에서부터 하악은 물론 경부, 흉부까지 연장되어 다양하게 나타날 수 있으며, 원인은 확실하지 않으나 정중부로의 중배엽의 침투 실패, 하악돌기의 유합부전 그리고 외부 요인들이 논의되고 있다. 치료방법 및 시기에 관해서는 임상소견이 다양하고 증례가 드물기 때문에 많은 논란이 있어왔다. 그러나 현재의 경향은 연조직 기형은 연하 및 발음의 기능적 장애를 예방하기 위하여 가능한 조기에 치료하며, 악골고정을 위한 강선 결찰 혹은 골이식술은 사춘기 후로 미루는 추세이다. 본 교실에서는 저작 장애를 주소로 내원한 8세 여자 환자의 임상소견에서 하악골 정중열과 하순의 수술로 인한 반흔조직 및 하순에서부터 치조골을 가로지르는 섬유성 소대 등을 발견할 수 있었으며, 하악의 정중열을 장골 이식을 이용 하여 양호한 결과를 얻을 수 있었으며, 추후 하순과 순. 설측 전정의 연조직 기형은 심미성과 기능 향상을 위해 부가적인 술식이 필요하리라 생각된다.