• Journal of the Korean Geosynthetics Society
• /
• v.18 no.4
• /
• pp.193-204
• /
• 2019

Reliability analyses of sixteen domestic design cases of open cell caisson breakwaters against circular sliding failure were conducted in this study. For the reliability analyses, uncertainties of parameters of soils, mound, and concrete cap were assessed. Bishop simplified method was used to obtain load and resistance of open cell caisson breakwater for randomly generated open cell caisson breakwater. Sufficient number of Monte Carlo simulations were conducted for randomly generated open cell caisson breakwaters, and statistical analysis was conducted on loads and resistances collected from the large number of Monte Carlo simulations. Probability of failure produced from Monte Carlo simulation has a nonconvergence issue for very low probability of failure; therefore, First-Order Reliability Method (FORM) was conducted using the statistical characteristics of loads and resistances of open cell caisson breakwaters. In addition, effects of safety factor, uncertainties of load and resistance, and correlation between load and resistance on reliability of open cell caisson breakwaters against circular sliding failure were examined.

• Journal of Korean Biological Nursing Science
• /
• v.12 no.2
• /
• pp.114-126
• /
• 2010

Purpose: To examine the levels of the disease-related knowledge and educational demands of pre-dialysis, chronic renal failure patients at different GFRs and stages. Methods: This study used a cross-sectional survey and aimed at 116 pre-dialysis, chronic renal failure patients, who were registered and received regular treatment from December 1 to December 31, 2009 at the nephrology departments of tertiary medical centers in Seoul. Stages were classified into Stage 3, 4 and 5 depending on GFR ranges. To measure the levels of knowledge and educational demands, the tool, which were first invented by Young Ae Lim (1996) and then modified by Hyo Sun Lim (2005) to adjust the knowledge and educational demands measuring tool for hemodialysis patients to pre-dialysis patients with chronic renal failure, was used. Collected data was analyzed with the SPSS WIN 12.0 program (average, standard deviation, Pearson's correlation coefficient, t-test and ANOVA). Results: There was a significant difference in the disease-related knowledge levels of the subjects at each stage (F=24.41, p=.000). The Scheffe post hoc test confirmed that patients at higher stages had higher levels of knowledge of their disease. Also, although the results showed that patients at higher stages had higher educational demands, there was no significant difference among the groups (F=1.259, p=.288). Conclusion: As patients have different levels of knowledge of the disease and educational demands depending on their stages, it is important to develop and use a systematic education program that reflects the demands and levels of patients at each stage in order to help pre-dialysis patients with chronic renal failure with self-management and improve their quality of life.

• Journal of Korean Clinical Nursing Research
• /
• v.22 no.1
• /
• pp.28-37
• /
• 2016

Purpose: This study was to investigate the relationships between among health literacy, knowledge and self-care behavior in elderly patients with heart failure(HF). Methods: 166 patients (age ${\geq}65$ years) with HF were recruited in a cardiovascular center of an university affiliated hospital. The structured questionnaire included Health literacy, Dutch Heart Failure Knowledge Scale, European Heart Failure Self-care Behavior, Self-Care of Heart Failure Index. Data were analyzed by descriptive statistics, Chi-test, Pearson correlation analysis, t-test and ANCOVA using SPSS/WIN version 21.0. Results: Participants with the high level of health literacy were more likely to be younger (p=.001), men (p=.001), with more education (p<.001), and have a job (p=.004), and with a higher economic status (p=.005). The positive correlations between the level of health literacy, knowledge, and self-care behavior were confirmed (p<.001). Participants with the high level of health literacy showed higher level of knowledge, more self-care behavior for health maintenance, and confidence. Conclusion: This study shows that the level of health literacy may influence knowledge and self-care behavior in elderly patients with HF. In order to improve self-care behaviors in elderly patients, a strategic nursing approach based on the level of patients' health literacy needs to be considered.

• Geomechanics and Engineering
• /
• v.20 no.5
• /
• pp.461-474
• /
• 2020

Analysing the incompatible deformation and damage evolution around the tunnels in mixed strata is significant for evaluating the tunnel stability, as well as the interaction between the support system and the surrounding rock mass. To investigate this issue, confined compression tests were conducted on upper-soft and lower-hard strata specimens containing a circular hole using a rock testing system, the physical mechanical properties were then investigated. Then, the incompatible deformation and failure modes of the specimens were analysed based on the digital speckle correlation method (DSCM) and Acoustic Emission (AE) data. Finally, numerical simulations were conducted to explore the damage evolution of the mixed strata. The results indicate that at low inclination angles, the deformation and v-shaped notches inside the hole are controlled by the structure plane. Progressive spalling failure occurs at the sidewalls along the structure plane in soft rock. But the transmission of the loading force between the soft rock and hard rock are different in local. At high inclination angles, v-shaped notches are approximately perpendicular to the structure plane, and the soft and hard rock bear common loads. Incompatible deformation between the soft rock and hard rock controls the failure process. At inclination angles of 0°, 30° and 90°, incompatible deformations are closely related to rock damage. At 60°, incompatible deformations and rock damage are discordant due that the soft rock and hard rock alternately bears the major loads during the failure process. The failure trend and modes of the numerical results agree very well with those observed in the experimental results. As the inclination angles increase, the proportion of the shear or tensile damage exhibits a nonlinear increase or decrease, suggesting that the inclination angle of mixed strata may promote shear damage and restrain tensile damage.

• Journal of the Korean Society for Precision Engineering
• /
• v.8 no.1
• /
• pp.74-83
• /
• 1991

A study on the Correlation of Orthogonal Cutting Parameter (Cutting speed, Depth of cut, Feed Rate) and Acoustic Emission Signal. It is well known that acoustic emission (AE) is the emission of elastic wave resulting from the deformation and fracture of materials. This study estabished correlation of orthogonal cutting parameter and AE signal, and researched into in-process monitoring of tool wear and failure. The results are as follow; 1. AE RMS was under the influence of cutting speed but hardly influenced by depth of cut and feed rate. 2. AE RMS was under the influence of flank wear. 3. AE count rate increased by increased cutting speed. 4. AE RMS value was rapidly increased in 130 m flank wear.

• Journal of Wellbeing Management and Applied Psychology
• /
• v.4 no.1
• /
• pp.11-18
• /
• 2021

Purpose: This study aims to explore the correlation between job and hypertension. Hypertension is a major risk factor such as stroke, myocardial infarction, heart failure, and vascular aneurysms. Research design, data and methodology: The data from this study are the 2017 National Health and Nutrition Examination Survey classified into office workers and non-office workers. Frequency analysis was used for general characteristics analysis, and ANOVA test analysis was used for correlation between subjects' basic variables and blood pressure. The post analysis as turey was used to verify the validity of the statistical results. All statistical analyzes were performed using the IBM SPSS 24.0 program. Results: There was a difference in the prevalence of hypertension among office workers and non-office workers.

• Journal of Sensor Science and Technology
• /
• v.32 no.5
• /
• pp.313-319
• /
• 2023

In this study, we propose a method to improve the accuracy of acoustic odometry using optimal frame interval selection for Fourier-based image registration. The accuracy of acoustic odometry is related to the phase correlation result of image pairs obtained from the forward-looking sonar (FLS). Phase correlation failure is caused by spurious peaks and high-similarity image pairs that can be prevented by optimal frame interval selection. We proposed a method of selecting the optimal frame interval by analyzing the factors affecting phase correlation. Acoustic odometry error was reduced by selecting the optimal frame interval. The proposed method was verified using field data.

• Proceedings of the KSR Conference
• /
• 2011.05a
• /
• pp.1636-1641
• /
• 2011

Typically Korea Railroad is executing the limited inspection and general inspection about passenger car by mileage and the time elapsed.(ex. one year, two years) These types of inspection system continue from the beginning of the railroad operation of the steam locomotive age to present. According to the rolling stocks modernized and improved, mileage and the time elapsed for periodical inspection has been expanded but the basic maintainability system of rolling stocks is not that different from the past. This fact needs verification that modern inspection method is right from various fields. In this paper, we analyze the data that we get the maintenance record from Korea railroad company about periodical inspection and failure. Next to considering the correlation of periodical inspection with failure based on analyzed data for watching periodical inspection effects. And we desire to need efficient rolling stock maintenance system better than fixed periodical inspection.

• Journal of Nutrition and Health
• /
• v.34 no.4
• /
• pp.359-366
• /
• 2001

Studies were carried out to explore the influence of dietary protein level on bone metabolism in uninephrectomized rat (experimental renal failure model) when dietary Ca and P contents were equal. Male rats were uninephrectomized or sham operated and fed 8%, 15% and 40% casein diets for 24 weeks. Ca and P contents of the all diet were 0.4% and 0.6% respectively. The results are summarized as follows. We did not found any significant difference in PTH and Ca level of the serum, Ca intake and Ca excretion among the experimental groups. There was significant positive correlation between the PTH and phosphate level. There was significant inverse correlation between serum Ca and creatinine level. The effect of the dietary protein level and renal mass loss on density and Ca contents of the bone were small and different according to the kinds of the bone. Low protein diet was associated with a significant enhancement of scapular density. Femur and vertebra density, however, were not influenced by dietary protein level and uninephrectomy. Light microscopic examination showed several calcified foci in the kidney in all experimental groups. Low protein diets have been used for a long time in the conservative management of chronic renal failure as they have a beneficial effect in preventing the appearance of symptoms. This study elucidated that part of beneficial effects of the low protein diet related to the suppression of the hyperphosphatemia. And these results, even though uninephrectomized rats fed high protein diet, the secondary hyperparathyroidism is supressed by the regulation of the P level. Therefore this study emphasized the need to pay more attention to the regulation of dietary P level as well as dietary protein content in chronic renal failure. (Korean J Nutrition 34(4): 359∼366, 2001)

• Journal of The Korean Society of Agricultural Engineers
• /
• v.64 no.5
• /
• pp.67-77
• /
• 2022

Recently, the trend in structural analysis and design is moving towards the development of reliable system. The reliability-based method defines various limit states related to usability and failure, thereby enabling multiple levels of design according to the importance of a structure. Meanwhile, an actual structure is composed of a set of several elements, and particularly, a frame type is composed of a system in which the members are connected each other. At this time, the actual connection between members is in a semi-rigid condition, not in complete rigid or hinged. This semi-rigid is found in several structures, especially in agricultural facilities designed with lightweight materials. In this study, a system reliability analysis technique for frame structure was established, and applied to an analysis of the semi-rigid connection. Various conditions of correlation were applied to reflect the connectivity between members, and through this, the limitations of existing structural analysis method and the behavioral characteristics of structure were analyzed. The failure probability of the frame member component and the overall structure system was significantly different in consideration of the semi-rigid connection. In addition, it was evaluated that the behavior of structure can be more accurately analyzed if the correlation according to the position of members in a system is further investigated.