• 한국시뮬레이션학회논문지
• /
• 제32권3호
• /
• pp.55-66
• /
• 2023

최근 해군 함정은 다양한 최첨단 장비와 ICT 기술이 탑재되어 다종의 임무를 수행할 수 있도록 개발되고 있다. 우리나라 해군 함정의 주요 임무 중 하나는 급증하고 있는 탄도탄의 위협으로부터 아군의 주요 유닛과 지역을 방어하는 대탄도탄전이다. 대탄도탄전의 경우 탐지에서 요격까지 이루어지는 과정이 복잡한 반면 실패에 대한 피해가 크기 때문에, 대탄도탄전을 효과적으로 수행하기 위한 많은 준비가 필요하다. 본 논문에서는 미래 해군 함정에 탑재될 전투체계 및 장비를 활용한 대탄도 탄전 시뮬레이션 모델을 제안한다. 특히, 대탄도탄전에 필요한 특성을 반영하여 향후 효과도 분석에 활용될 수 있는 시뮬레이션 모델을 제안하고자 한다. 이를 위하여, 시뮬레이션 모델 개발에 DEVS 형식론을 적용하여 모듈러하고 계층적인 모델을 개발하였으며, 다양한 대탄도탄전 상황을 효율적으로 표현할 수 있게 하였다. 제시된 사례 연구 결과에서는 함정의 탐지 체계의 성능 및 의사 결정으로 발생할 수 있는 대탄도탄전의 문제 상황을 시뮬레이션 내용과 그 의미를 설명하였다. 향후 본 연구의 결과가 함정의 대탄도탄전 효과도 분석은 물론 함정의 대탄도탄전의 효과적인 수행을 위한 최적의 전투자원 배치 및 제원 그리고 운용 전술 등을 개발하는데 활용되기를 기대한다.

• Structural Engineering and Mechanics
• /
• 제86권3호
• /
• pp.399-415
• /
• 2023

This paper presents the experimental and numerical evaluations on the circular SFRC columns reinforced GFRP rebars under the axial compressive loading. The test programs were designed to inquire and compare the effects of different parameters on the columns' structural behavior by performing experiments and finite element modeling. The research variables were conventional concrete (CC), fiber concrete (FC), types of longitudinal steel/GFRP rebars, and different configurations of lateral rebars. A total of 16 specimens were manufactured and categorized into four groups based on different rebar-concrete arrangements including GRCC, GRFC, SRCC, and SRFC. Adding steel fibers (SFs) into the concrete, it was essential to modify the concrete damage plastic (CDP) model for FC columns presented in the finite element method (FEM) using ABAQUS 6.14 software. Failure modes of the columns were similar and results of peak loads and corresponding deflections of compression columns showed a suitable agreement in tests and numerical analysis. The behavior of GFRP-RC and steel-RC columns was relatively linear in the pre-peak branch, up to 80-85% of their ultimate axial compressive loads. The axial compressive loads of GRCC and GRFC columns were averagely 80.5% and 83.6% of axial compressive loads of SRCC and SRFC columns. Also, DIs of GRCC and GRFC columns were 7.4% and 12.9% higher than those of SRCC and SRFC columns. Partially, using SFs compensated up to 3.1%, the reduction of the compressive strength of the GFRP-RC columns as compared with the steel-RC columns. The effective parameters on increasing the DIs of columns were higher volumetric ratios (up to 12%), using SFs into concrete (up to 6.6%), and spiral (up to 5.5%). The results depicted that GFRP-RC columns had higher DIs and lower peak loads compared with steel-RC columns.

• Computers and Concrete
• /
• 제25권2호
• /
• pp.95-109
• /
• 2020

This paper aims to analytically study the effect of loading conditions and confinement type on the mechanical properties of the concrete-steel composite columns under axial compressive loading. The axial loading is applied to the composite columns in the two ways; only on the concrete core, and on the concrete core and steel tube simultaneously, which are called steel tube-confined concrete (STCC) and concrete-filled steel tube (CFST) columns, respectively. In addition, the confinement is investigated in the three types of passive, short-term active and long-term active confinement. Nonlinear finite element 3D models for analyzing these columns are developed using the ABAQUS program, and then these models are verified with respect to the recent experimental results reported by the authors on the STCC and CFST columns experiencing active and passive confinements. Axial and lateral stress-strain curves as well as the failure mode for qualitative verification, and compressive strength for quantitative verification are considered. It is found that there is a good consistency between the finite element analysis results and the experimental ones. In addition, a parametric study is performed to evaluate the effect of axial loading type, prestressing ratio, concrete compressive strength and steel tube diameter-to-wall thickness ratio on the compressive behavior of the composite columns. Finally, the compressive strength results of CFST specimens obtained via the finite element analysis are compared with the values specified by the international codes and standards including EC4, CSA, ACI-318, and AISC, with the results showing that ACI-318 and AISC underestimate the compressive strength of the composite columns, while EC4 and CSA codes present overestimated values.

• The Journal of Advanced Prosthodontics
• /
• 제12권2호
• /
• pp.67-74
• /
• 2020

PURPOSE. This study evaluated the influence of prosthesis weight and number of implants on the bone tissue microstrain. MATERIALS AND METHODS. Fifteen (15) fixed full-arch implant-supported prosthesis designs were created using a modeling software with different numbers of implants (4, 6, or 8) and prosthesis weights (10, 15, 20, 40, or 60 g). Each solid was imported to the computer aided engineering software and tetrahedral elements formed the mesh. The material properties were assigned to each solid with isotropic and homogeneous behavior. The friction coefficient was set as 0.3 between all the metallic interfaces, 0.65 for the cortical bone-implant interface, and 0.77 for the cancellous bone-implant interface. The standard earth gravity was defined along the Z-axis and the bone was fixed. The resulting equivalent strain was assumed as failure criteria. RESULTS. The prosthesis weight was related to the bone strain. The more implants installed, the less the amount of strain generated in the bone. The most critical situation was the use of a 60 g prosthesis supported by 4 implants with the largest calculated magnitude of 39.9 mm/mm, thereby suggesting that there was no group able to induce bone remodeling simply due to the prosthesis weight. CONCLUSION. Heavier prostheses under the effect of gravity force are related to more strain being generated around the implants. Installing more implants to support the prosthesis enables attenuating the effects observed in the bone. The simulated prostheses were not able to generate harmful values of peri-implant bone strain.

• 의학교육논단
• /
• 제15권1호
• /
• pp.46-53
• /
• 2013

The purpose of this study was to analyze the relationship among medical students' learning motivation, characteristics of multiple intelligence, and academic achievement. The participants were 144 medical students. The data were collected by administering learning motivation tests (self-confidence, self-efficacy, level of task, emotion of learning, learning behavior, failure tolerance, task difficulty, and academic self-efficacy), a multiple intelligence test (linguistic intelligence, logical-mathematical intelligence, musical intelligence, bodily-kinesthetic intelligence, spatial intelligence, interpersonal intelligence, intrapersonal intelligence, and naturalistic intelligence), and two semesters of grades. There is a correlation between multiple intelligences and learning motivation. Among academic self-efficacy of academic motivation, the self-control efficacy (0.28) and behavior (0.18) subscales are significantly positively correlated with academic achievement. However, the emotion subscale (-0.18) was significantly negatively correlated. Learning motivation was correlated with two of the eight multiple intelligence profiles: the intrapersonal intelligence (0.18) and bodily-kinesthetic intelligence (-0.19). The structural equation modeling analysis showed that the behavior and self-control efficacy subscales of intrapersonal intelligence had an impact on academic achievement. An analysis according to the academic achievement group showed significant differences in self-control efficacy and emotion subscales with intrapersonal intelligence. A positive relationship can be observed between learning motivation and some characteristics of multiple intelligence of medical school students. In light of the findings, it is worth examining whether we can control medical students' learning motivation through educational programs targeting self-control efficacy and intrapersonal intelligence.

• 한국수자원학회논문집
• /
• 제47권11호
• /
• pp.1027-1037
• /
• 2014

본 연구에서는 하상변동 및 하상유지공 유실 문제가 발생했던 남한강과 금당천 합류부 지점을 대상으로 지류에서 유입되는 유량의 변화에 따른 흐름특성 및 하상변동 특성을 2차원 수치모형을 이용하여 분석하였다. 대상 구간의 수치모의 분석결과, 본류에서는 흐름집중 현상에 의해 지류 유입유량에 관계없이 합류 전에 비해 합류 후 유속이 더 큰 것으로 나타났다. 그러나 지류 유입유량이 클수록 지류하천의 하도 침식이 가속화되고 따라서 주하도가 형성되어 지류에서의 마름영역이 더 크게 나타났다. 이로 인한 지류에서의 하도 침식은 지류에서의 유사발생량을 증가시키고 침식된 유사는 합류부 구간에 퇴적되는 것으로 나타났다. 합류부 구간에서의 지류 유입부 퇴적은 본류 흐름을 좌안으로 집중시키고 좌안의 하상이 저하되는 현상을 야기하였다.

• Computers and Concrete
• /
• 제11권2호
• /
• pp.123-148
• /
• 2013

The nonlinear finite element method with eight noded isoparametric quadrilateral element for concrete and two noded element for reinforcement is used for the prediction of the behavior of reinforcement concrete structures. The disturbed state concept (DSC) including the hierarchical single surface (HISS) plasticity model with associated flow rule with modifications is used to characterize the constitutive behavior of concrete both in compression and in tension which is named DSC/HISS-CT. The HISS model is applied to shows the plastic behavior of concrete, and DSC for microcracking, fracture and softening simulations of concrete. It should be noted that the DSC expresses the behavior of a material element as a mixture of two interacting components and can include both softening and stiffening, while the classical damage approach assumes that cracks (damage) induced in a material treated acts as a void, with no strength. The DSC/HISS-CT is a unified model with different mechanism, which expresses the observed behavior in terms of interacting behavior of components; thus the mechanism in the DSC is much different than that of the damage model, which is based on physical cracks which has no strength and interaction with the undamaged part. This is the first time the DSC/HISS-CT model, with the capacity to account for both compression and tension yields, is applied for concrete materials. The DSC model allows also for the characterization of non-associative behavior through the use of disturbance. Elastic perfectly plastic behavior is assumed for modeling of steel reinforcement. The DSC model is validated at two levels: (1) specimen and (2) practical boundary value problem. For the specimen level, the predictions are obtained by the integration of the incremental constitutive relations. The FE procedure with DSC/HISS-CT model is used to obtain predictions for practical boundary value problems. Based on the comparisons between DSC/HISS-CT predictions, test data and ANSYS software predictions, it is found that the model provides highly satisfactory predictions. The model allows computation of microcracking during deformation leading to the fracture and failure; in the model, the critical disturbance, Dc, identifies fracture and failure.

• 콘크리트학회논문집
• /
• 제18권2호
• /
• pp.177-188
• /
• 2006

전통적인 비선형 유한요소해석은 모델링이 복잡하고 어려운 해석기법이 필요로 한다. 게다가 해석결과가 응력-변형률 관계로 도출되므로 그 결과를 분석하거나 설계에 활용하기 어렵다. 본 연구에서는 설계 지향적인 수치해석방법으로 트러스 모델을 이용한 비선형 해석방법을 개발하였다. 해석하고자 하는 철근콘크리트 부재를 길이방향, 직각방향, 대각방향의 트러스요소로 이상화한다. 기본적으로 각 요소는 철근과 콘크리트의 복합체이며, 주기해석을 위하여 철근과 콘크리트 요소를 위한 간략화된 비선형 주기이력모델을 적용하였다. 제안된 방법의 검증을 위하여 전단경간비, 하중조건, 철근량, 배근형태 등이 다른 다양한 전단지배 보와 벽체에 대하여 비선형해석을 수행하였고, 예측된 비탄성강도, 에너지소산능력, 변형능력, 파괴유형 등을 실험 결과와 비교하였다. 해석결과, 철근콘크리트 부재의 변형능력을 예측하기 위해서는 반복적인 인장-압축을 받는 콘크리트 스트럿에 사용되는 압축연화모델이 부재특성에 따라 수정되어야 함이 밝혀졌다.

• 한국압력기기공학회 논문집
• /
• 제13권2호
• /
• pp.75-83
• /
• 2017

In severe accident conditions of light water reactors, the loss of coolant may cause problems in integrity of zirconium fuel cladding. Under the condition of the loss of coolant, the zirconium fuel cladding can be exposed to high temperature steam and reacted with them by producing of hydrogen, which is caused by the failure in oxidation resistance of zirconium cladding materials during the loss of coolant accident scenarios. In order to avoid these problems, we develop a multi-metallic layered composite (MMLC) fuel cladding which compromises between the neutronic advantages of zirconium-based alloys and the accident-tolerance of non-zirconium-based metallic materials. Cold pilgering process is a common tube manufacturing process, which is complex material forming operation in highly non-steady state, where the materials undergo a long series of deformation resulting in both diameter and thickness reduction. During the cold pilgering process, MMLC claddings need to reduce the outside diameter and wall thickness. However, multi-layers of the tube are expected to occur different deformation processes because each layer has different mechanical properties. To improve the utilization of the pilgering process, 3-dimensional computational analyses have been made using a finite element modeling technique. We also analyze the dimensional change, strain and stress distribution at MMLC tube by considering the behavior of rolls such as stroke rate and feed rate.

• 지질공학
• /
• 제23권4호
• /
• pp.381-387
• /
• 2013

홍수위험지도를 작성하기 위하여 수치모형을 이용한 잠재적 피해 대상 지역 파악이 선행되어야 한다. 댐 붕괴로 인하여 빚어지는 홍수위험지도 작성에서도 시나리오 별로 댐 붕괴를 모의하기 위한 댐 붕괴 수치 모의가 필요하다. 댐 붕괴 시 첨두 유량은 결정 인자인 댐 붕괴(breach)나 저수지의 수량과 댐 붕괴 형성 및 진행에 민감하므로 이런 요소를 포함하는 물리적 모형이 필요하다. 댐 붕괴 메커니즘과 수리학적 현상이 모든 댐 붕괴에 같다고 가정하고 하나의 물리적 댐 붕괴 수치 모형을 구축하였다. 댐 붕괴지점에서 수문곡선을 추정하는데 초점을 두어 댐 하류의 하도 추적 시 상류부의 경계조건 역할을 하도록 하는 것이며, 연구에서 하류부의 하도 추적은 다루지 않았다. 물리적 모형은 댐 붕괴 형성과정에 필요한 역할과 댐 붕괴를 통한 흐름의 수리학적 설명을 담고 있다. 2008년 중국의 장지산(Tangjishan) 댐 붕괴 시 관측된 현장 자료를 이용하여 모형의 수행능력을 검정하였다. 모의 결과는 만족할만한 수준의 정확도를 가지는 것으로 나타났으며 결정계수는 0.974, NSC는 0.94, RMSE는 $610m^3/sec$ 정도로 나타났다. 이로 미루어보아 연구에서 구축된 댐 붕괴 모형은 실제 댐 붕괴 관측 자료를 현실적으로 잘 재현해내는 것으로 확인되었으며, 댐 붕괴로 인한 홍수위험지도 구축 시 상류부 경계조건으로서 활용성이 높은 것으로 나타났다.