• 제목/요약/키워드: Fail-Safety

검색결과 193건 처리시간 0.027초

자동차 정기검사 주기에 관한 고찰 (A Consideration on the Inspection Frequency of the Periodic Technical Vehicle Inspection)

  • 임재문;정영달;여운석;강병도;윤영한
    • 자동차안전학회지
    • /
    • 제4권2호
    • /
    • pp.17-21
    • /
    • 2012
  • The periodic technical vehicle inspection is to prevent the accident through the finding and fixing the defects of the vehicle. The periodic technical vehicle inspection in Korea was studied for assessing the adequacy of the inspection frequency. The inspection frequencies of many countries including EU, USA and Japan were compared. The average mileages by the vehicle usage and type were represented. The warranty period and recommended replacement period of parts of the domestic auto makers was studied. Currently, the inspection frequency for the periodic technical vehicle inspection in Korea is appropriate. The pass-fail rate and the cost-benefit analysis for the periodic technical inspection in Korea will be needed in the decision making process for the inspection frequency.

강판 또는 탄소섬유시트 보강된 수평 구조 부재의 안전성 평가시 고려사항 (Considerations in the Safety Evaluation of the Lateral Structural Members Reinforced with Steel Plate or CFRP Sheet)

  • 강석원;박형철;오보환
    • 한국콘크리트학회:학술대회논문집
    • /
    • 한국콘크리트학회 2003년도 가을 학술발표회 논문집
    • /
    • pp.331-334
    • /
    • 2003
  • Since regulation or specification for the reinforcing method are quite ambiguous, structural design for the reinforcement can be subjectively and arbitrarily conducted. Thus, reasonable limitation and guide for the quantity of the reinforcement are required for the safe use of the structure after repair. In order to guarantee the safety of the structural member several items should be considered; reinforcing limit to avoid the brittle failure, least required strength of the existing member before reinforcement in order not to fail under the new serviceability load condition when reinforcing steel plates or CFRP sheets are harmed or subjected to fire.

  • PDF

추진시스템 종합성능시험에서의 엔진부 비상정지 설정 (Emergency Blockage Application of Engine Part for Integrated Propulsion Performance Test)

  • 하성업;이정호;권오성;김병훈;강선일;한상엽
    • 한국추진공학회:학술대회논문집
    • /
    • 한국추진공학회 2003년도 제20회 춘계학술대회 논문집
    • /
    • pp.171-176
    • /
    • 2003
  • 추진시스템 종합성능시험을 위한 시험시설이 구축되었으며, 최소계측을 통하여 최대한의 안전을 확보하기 위한 비상정지시스템이 검토되었다. 이에 연소실압력과 가속도신호를 이용한 비상정지시스템이 구축되었고, 이 측정변수를 통하여 점화지연 및 실패, 소화, 추진제공급상태, 불안정연소, 과도 구조진동 등을 감시할 수 있었으며, 시험 중 빠른 판단 및 조치에 의하여 시험의 안전을 확보할 수 있었고, 목적한 종합성능시험을 안전하게 완료할 수 있었다.

  • PDF

조종사의 위성항행시스템 적응방안에 관한 연구 (A Study on the Pilot's Adaptation for GPS Operation)

  • 한경근;송병흠
    • 한국항공운항학회지
    • /
    • 제7권1호
    • /
    • pp.7-18
    • /
    • 1999
  • The FAA, along with the ICAO and other members of the civil aviation community, has recognized that a GNSS will provide the primary stand-alone navigation system in the 21st Century. FAA has initiated plans to transition from its present ground-based navigation and landing system to satellite-based using signals generated by the GPS. In spite of some risks, GPS users are increasing rapidly. About 52 aircraft equipped with various GPS in their system and wide spread of GPS may be expected in Korea. However, the regulations concerning with CPS implementation were not established by the government. Another problem is GPS receiver's interface. The user interface, operating method and capability vary with GPS class and model. As a direct operator for the system, pilots have to ensure these limitations and rules for efficient adaptation and safety. The issues identified by the study are highly interrelated, and are evidence of aviation system problem. To treat one issue in isolation may improve certain aspects of the aviation system, but will ultimately fail to fundamentally increase the safety and efficiency for the system.

  • PDF

헬리콥터 기술시범기의 비행제어 조종권 전환 모의를 위한 기계식 조종장치 모델 설계 연구 (A Model of a Mechanical Flight-Control System for Simulating Control Authority Switching of a Helicopter Technical Demonstrator)

  • 양창덕
    • 항공우주시스템공학회지
    • /
    • 제11권2호
    • /
    • pp.23-29
    • /
    • 2017
  • Since the flight-control system is critical for the safety of an aircraft, a fail-safe system is needed in a flight demonstrator used to test a new flight-control system. A backup control system is also needed to ensure safety in using a mechanical flight-control system. This paper presents a development of an MFCS (Mechanical Flight Control System) model for simulating control authority switching of a helicopter technical demonstrator, as well as the results of evaluating the developed MFCS model.

도시철도 신호시스템 설계에서의 운전시격 향상에 대한 연구 (The Study of Headway Improvement on Signaling System Des19n of Urban Transit)

  • 백종현;안태기;정락교;한성호;변윤섭;박현준
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 1999년도 하계학술대회 논문집 A
    • /
    • pp.492-494
    • /
    • 1999
  • To improve safety operation of urban transit, compatible design of signaling system is most important factor at future train operation and management. Therefore, signaling system should be designed compatible transport demand of target year. In addition, signaling system should be designed improved train safety, based fail-safe principle. Most of all, to solve passenger concentration, high density and to improve efficiency of train operation. Headway improvement of train is most important. Train organization length of new urban transit as light rail is generally shorter than EMU. Therefore, to increase passenger service and operation efficiency, minimum headway of one minute in this system should be important required.

  • PDF

신호시스템 요구사항 도출방안 (A Study on Reliability and Safety Calculation of vital system in Railway Signalling System)

  • 이종우;정의진;황종규;신덕호
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2000년도 하계학술대회 논문집 B
    • /
    • pp.1387-1389
    • /
    • 2000
  • Railway signalling system is required to be high safety against collision, derailment and collision at level crossing and to be high availability. The signalling system is usually divided into automatic train control, interlocking and centralized traffic control systems and each system must be high fail safe and availability. This study focused on reliability calculation of vital systems in train control system.

  • PDF

화학공정의 위험성 평가를 위한 화재 폭발 지수 산정 프로그램의 개발 (Development of Fire and Explosion Index Estimation Program for Risk Assessment in Chemical Processes)

  • 김기수;백종배;고재욱;노삼규
    • 한국안전학회지
    • /
    • 제8권2호
    • /
    • pp.58-63
    • /
    • 1993
  • Recently, a large amount of flammable or explosive materials have been handled or stored in chemical industries. H the equipments fail or the materials release in consequence of operation errors, fire and explosion could occur to them. Thus, risk assessment using quantification of risks is very important when design of processes and modifications of installed processes are performed. The purpose of this study is to develop the program for fire and explosion index in order to quantify the expected damage of fire and explosion incidents in chemical plants, to identify equipment that would be likely to contribute to the creation or escalation of an incident, to comunicate the potential fire and explosion risk to management and to account of damage cost.

  • PDF

자연어처리 알고리즘을 이용한 위험기반 항공안전데이터 자동분류 방안 연구 (A Study on Auto-Classification of Aviation Safety Data using NLP Algorithm)

  • 양성훈;최영;정소영;안주현
    • 한국항행학회논문지
    • /
    • 제26권6호
    • /
    • pp.528-535
    • /
    • 2022
  • 항공기 제작 및 운송 기술 발달로 국내 항공산업은 비약적인 발전을 이루었으나, 항공안전 사고는 지속해서 발생하고 있다. 관리 감독기관에서는 위험기반 항공안전데이터를 기반으로 위해 요인과 위험도를 분류하고, 운송사업자별 안전 경향성 파악과 취약분야를 도출하여 사전점검을 수행함으로써 사건·사고를 사전 예방중에 있다. 그러나 자연어 형식으로 기술된 항공안전데이터의 휴먼 분류는 지식과 경험, 성향에 따라 서로 다른 분류 결과를 초래하고, 이벤트 내용의 의미 파악 및 분류를 위한 작업에 상당한 시간을 소요케 한다. 이에, 본 논문에서는 KoBERT 모델을 fine-tunning하고 5천 건 이상의 항공안전데이터를 기계학습 시켜 신규 데이터의 분류 값을 예측한 결과 79.2%의 정확성을 보였다. 그리고 유사 이벤트에 대해 동일한 결과 예측과 fail 된 데이터 중 일부는 휴먼 에러에 의한 오류임을 확인할 수 있었다.

화학물질 안전관리 시설기준 합리화 연구 : 방류벽 중심 (A Study of the Rationalization of Handling Facility Safety Management Standard for Hazardous Chemicals : Focusing on Dike)

  • 김남석;유병태
    • 한국가스학회지
    • /
    • 제24권2호
    • /
    • pp.29-35
    • /
    • 2020
  • 화학사고의 예방 및 대응을 위한 화학물질관리법이 2015년 전부 개정되었다. 이를 계기로 유해화학물질 취급시설의 설치 및 관리기준도 상당히 강화되었다. 하지만, 일부 기존시설의 경우 시설기준 준수가 어려운 쉽지 않은 경우가 발생하지만 일괄적으로 적용되고 있어 산업계에서는 어려움을 호소하고 있는 실정이다. 본 연구에서는 이러한 최근 2년(2017-2018)간 취급시설 중 민원(1,087건)이 가장 많았던(2017:117건, 2018:83건) 방류벽에 대한 선행연구, Flacs 시뮬레이션, 국내·외 기준, 만족도 조사 등을 통해 보다 합리적인 방안을 마련하고자 하였다. 이에 현재 가동 중인 기존시설에 한하여 방류벽의 설치 목적을 고려하여 화학물질 유·누출을 신속하게 감지할 수 있고 신뢰성을 높이기 위해 감지기를 추가로 설치하거나 상시 모니터링이 가능한 폐쇄회로텔레비전(CCTV)을 추가로 설치·운영하는 경우 추가 대체방안으로 인정하였다. 이는 부지를 확보하기 힘들거나, 공사비용 등 경제적인 문제로 법적인 규제를 이행하지 못하는 영세사업장 또는 중소기업의 안전측면과 비용적인 측면에 도움이 될 것이다.