• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2014.10a
• /
• pp.745-750
• /
• 2014

The chatter vibration in the machining process plays bad role in machining quality such as high roughness as well as tool life and machine failure. And the grinding process under this risk in the fully automated factory is exposed to the unexpected mass machining quality problem. Studying the vibration signal of the hub bearing grinding process, the reason of chatter vibration was explained with the specific machining pattern of chatter. And this study suggests the chatter detecting method in the production line, which is monitoring the peak acceleration level around the natural frequencies of the specimen, and calculating kurtosis value by assuming the chatter is related to the resonance of the specimen. The suggested method was applied to the vehicle hub bearing grinding process and proved good to detecting the chatter induced machining quality problem.

• Proceedings of the KSR Conference
• /
• 2008.11b
• /
• pp.400-405
• /
• 2008

Motor is energy converting system to generate mechanical force from electrical power and there are various typed motors in home, office, factory, vehicles, aircraft, shipping, etc. Recently in compliance with performance and reliability and the applications of variable speed motors with invert driver are expanded. Almost high power inverter have IGBT and IGBT's fault cause motor system fault. If we can calculate and foresee troubles of IGBT, we can protect accident caused by motor system fault. In this paper, the deterioration test method of IGBT devices is proposed and the test results of proposed method are shown by evaluated equipment. The basic concept of proposed method is current-voltage characteristic curve test between drain and source of IGBT in open state. The applied voltage type is ramp and it is confirmed that the current-voltage curvet pattern of IGBT in open state represents IGBT's deterioration state.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2007.05a
• /
• pp.379-382
• /
• 2007

The MEMS (Micro Electro Mechanical Systems) process is used in a micro/nano pattern manufacturing method. This method is based on the lithography technology. But the MEMS process has some problems such as complicated process, long processing time and high production costs. Many researchers are doing research in substitute manufacturing method to work out a solution to these problems. In this paper, we apply a dieless incremental forming technology to a substitute method of MEMS process. This dieless forming technology is using in the commercial scale sheet forming such as a prototype of automobile sheet parts. 5-axes CNC (Computerized Numeric Control) method are applied in this system to get a micro-scale dieless forming results. These 5-axes system are composed of precision AC servo motor stages (4-axes) and PZT actuator (1-axis). A PZT actuator is used in a precision actuating axis because it can be operated in the nano scale stroke resolution. This micro dieless incremental forming system has the advantage of minimization in manipulating distance and working space. As equipment and tools become smaller in size, minute inertia force and high natural frequency can be obtained. Therefore, high precision forming performance can be obtained. This allows the factory to quickly provide the customer with goods because the manufacturing system and process are reduced. To construct this micro manufacturing system, many technologies are necessary such as high stiffness frame, high precision actuating part, structural analysis, high precision tools and system control. To achieve the optimal forming quality, the micro dieless forming system is designed and made with high stiffness characteristic.

• Advances in Computational Design
• /
• v.2 no.4
• /
• pp.293-311
• /
• 2017

There are several claimed benefits for the impact of design patterns (DPs) on software quality. However, the association between design patterns and fault-proneness has been a controversial issue. In this work, we evaluate the fault-proneness of design patterns at four levels: the design level, category level, pattern level, and role level. We used five subject systems in our empirical study. As a result, we found that, at the design level, the classes that participate in the design patterns are less fault-prone than the non-participant classes. At the category level, we found that the classes that participate in the behavioral and structural categories are less fault-prone than the non-participant classes. In addition, we found that the classes that participate in the structural design patterns are less fault-prone than the classes that participate in the other categories. At the pattern level, we found that only five patterns show significant associations with fault-proneness: builder, factory method, adapter, composite, and decorator. All of these patterns except for builder show that the classes that participate in each one of them are less fault-prone than the non-participant classes in that pattern. The classes that participate in the builder design pattern were more fault-prone than the non-participant classes and the classes that participate in several patterns: the adapter, the composite, and the decorator design patterns. At the role level, the most significant differences were between the classes that participate in some roles and the non-participant classes. Only three pairs of design pattern roles show significant differences. These roles are concrete-product vs. concrete-creator, adapter vs. adaptee, and adapter vs. client. The results recommend the use of design patterns because they are less fault-prone in general except for the builder design pattern, which should be applied with care and addressed with more test cases.

• Proceedings of the Korea Concrete Institute Conference
• /
• 1998.04b
• /
• pp.695-702
• /
• 1998

The purpose of this study is to investigate the mechanical properties of precast concrete cured by accelerated curing methods such as, steam curing method and warm water curing method varing maximum temperature of curing along to the period of curing. Some specimens are cured by accelerated curing method(warm water curing method) and then deposited in the storehouse. The others are deposited in the storehouse directly. All of these are cured until being tested to compare these two group's mechanical characteristics for each period 3days, 7days, 28days. The goal of this comparison is to estimate the efficiency of accelerated curing method in the case of precast concrete stocked in the field or warehouse for a long term and to make guide line for factory manager to make a economical products of concrete of a good quality. We can conclude some guide lines 1) It is not efficient to cure concrete with accelerated method at higher than 80℃. 2) The continuing of curing period more than 36hr makes damage to concrete in using accelerated curing method. 3) The strength revelation of concrete cured by accelerated curing methods, added rice husk ash more delayed than OPC concrete done but the strength of maximum value is higher than OPC concrete. 4) It is not efficient to use accelerated curing method in the case of storing the products for more than 7days in the aspect of mechanical properties.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.32 no.6D
• /
• pp.655-662
• /
• 2012

The aim of this study is to analyze tthe pattern of compacted area and the distribution characteristics in one-person household. Through ArcGis, we collect the basic data and classify the compact area in accordance with the pattern employing Ward method out of cluster analysis. The main results are found as follows; First, the station sphere type is located around Seomyun and Nampo-dong, which are the main CBD( Central Business District) This type must be essentially considered in residential plan for one-person household location. Second, the district oriented type is located around the subway and it has relatively better residential facilities and environments. Third, it is found that the younger worker including students resided in one room and villa in the type around university. Forth, the foreign workers and domestic workers in small and medium factory resided in the factory centered type which is far from the station sphere. Lastly, it is dormitory type which is isolated from the CBD, and insteadly amenable and well natural environment area, but students and workers in this area where there are lacking life-related facilities and aside from accessibilities feel uncomfortable.

• Journal of Korean Society for Quality Management
• /
• v.44 no.2
• /
• pp.265-276
• /
• 2016

Purpose: This paper reviews the papers on service quality issues which are published in the Journal of the Korean Society for Quality Management (KSQM) since 1965. The literature review is purposed to survey a variety of service quality issues for several categories in terms of industry as well as research model. Methods: By use of the double diamond design process model 71 papers are analyzed 4 stages which are discover, define, develop and deliver. And all of service quality issues are classified into 4 categories: service factory, mass service, service shop and professional service by the service process matrix typology. Results: According to this review, there are several features of research trends. There are 'from physical service to information-intensive service pattern' and 'from private sector to public sector pattern'. And the Kano model has been a steady-selling model to measure the service quality as like a SERVQUAL. Another meaningful issue was a convergency of the research method and tools such as BSC, CRM, AHP, DEA, Information System, Systgem Dynamics and 6 Sigma. Conclusion: The review paper is expected to provide future direction to improve service quality theories and applications. There are three future research topics: Application area, measurement model and research purpose.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2021.10a
• /
• pp.82-84
• /
• 2021

Through the smart factory construction project, sensor data such as power, vibration, pressure, and temperature are collected from production facilities, and services such as predictive maintenance, defect prediction, and abnormality detection are developed through data analysis. In general, in the case of manufacturing data, because the imbalance between normal and abnormal data is extreme, an anomaly detection service is preferred. In this paper, FFT method is used to extract feature data of manufacturing data as a pre-stage of the anomaly detection service development. Using this method, we classified the produced products and confirmed results. In other words, after FFT of the representative pattern for each product, we verified whether product classification was possible or not, by calculating correlation coefficient.

• Proceedings of the KSR Conference
• /
• 2011.10a
• /
• pp.1659-1663
• /
• 2011

Precast concrete slab track is a track structure to be installed by transporting and assembling precast concrete slabs manufactured at the factory. This method can improve concrete quality, provide easy maintenance and reduce construction time, compared with in-situ concrete track. However, the concrete slabs being continuously connected in longitudinal direction, due to the temperature change between summer and winter, the openings at slab joints have occurred. Thus, in this study, to identify the cause of this opening of slab joint, the joint opening caused by temperature drop in the longitudinally continuous precast concrete slab track has been predicted using three-dimensional finite element analysis, and compared with field measurements. Based on the proven model, the slab joint opening, and the stress pattern of concrete slab and steel reinforcement according to concrete slab-base friction properties, concrete-reinforcement bond properties, and prestressing were analyzed.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.07b
• /
• pp.1180-1183
• /
• 2003

170kV GIS(Gas Insulated Switchgear) is widely used in large industrial factory-electrical facilities of private use because has many benefits. But Other equipments's failures are occurred by GIS failures and give rise economic problems to user. Therefore we will examine the actual condition of the 170kV GIS-electrical facilities of private use and are able to confirm the distribution characteristic analysis of disconnecting switchgear. In this paper, we presents the actual condition investigation of the disconnecting switchgear of 170kV GIS-electrical facilities of private use by post - failure pattern, inspection method, test equipments and so forth.