• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2000년도 추계학술대회 논문집
• /
• pp.862-865
• /
• 2000

The object of this paper is to evaluate the surface roughness using the experimental equation of surface roughness, which is developed in turning by an orthogonal array method. $L_9{3^4}$ orthogonal array method, one of fractional factorial design has been used to study effects of main cutting parameters such as cutting speed, feed rate and depth of cut, on the surface roughness. And the analysis of variance (ANOVA)-test has been used to check the significance of cutting parameters. Using the result of ANOVA-test, the experimental equation of surface roughness, which consists of only significant cutting parameter - feed rate, has been developed. The coefficient of determination of this equation is 0.962.

• 생명과학회지
• /
• 제33권3호
• /
• pp.268-276
• /
• 2023

본 연구는 carvedilol과 ivabradine의 이층정 제형 개발에 있어 carvedilol 속방층의 제형조건을 최적화하기 위해 수행되었다. Full-factorial design of experiments를 사용하여 carvedilol 속방층(wet granulation part)의 첨가제(microcrystalline cellulose, citric acid, crospovidone) 및 타정 시 공정변수(main compression)를 확인하였고 각 독립변수에 대한 7가지 종속변수(함량, 함량 균일성, 경도, 마손도, 붕해, 용출(pH 1.2 및 6.8)를 design expert software를 사용하여 평가하였다. Design of experiments (DoE) 실험에서 도출된 Analysis of Variance (ANOVA) 결과를 통해 main compression은 경도, 마손도, 붕해 시간에 유의한 영향을 주었고, microcrystalline cellulose는 마손도, 용출에 주요한 영향을 주었음을 확인하였다. 또한, citric acid는 마손도, crospovidone은 마손도, 용출에 주요한 영향을 주었음을 확인하였다. DoE실험 결과를 종합하여 최종적으로 도출된 설계공간에 따라 microcrystalline cellulose (약 18.0-32.0 mg), citric acid (약 0.5-12.0 mg), main compression (약 615-837 kgf)의 최적의 범위 내에서 초기 위험평가에서 평가된 모든 위험요인이 제거된 carvedilol 속방층의 최적 제조 범위를 확인하였다.

• 한국식품영양학회지
• /
• 제31권2호
• /
• pp.272-277
• /
• 2018

This research was conducted to elucidate the optimum conditions for the antibacterial activity of konjak jelly using the evolutionary operation-factorial design technique. In the first set of experiments, concentration of a coagulation agent, soaking liquid, and temperature of water were set to 0.4%, $0.6{\times}10^{-2}N$, and $65^{\circ}C$ as a central point, respectively. The highest antibacterial activity was acquired at E21, in which the number of bacteria was 1.25 log cfu/g. Because the code of changes in the main effect was (-), it could be decided that the central point of the first set was not the optimum point. Although antibacterial activity in the second set was improved, the values of the main effect were higher than that of changes in the mean effect. The central point of third set was concentration of coagulation agent 0.8%, concentration of soaking liquid $1.0{\times}10^{-2}N$, and temperature of water $65^{\circ}C$. It was found that the antibacterial activity of central point in the third set was highest among all the tested set. Further, all the necessary conditions were appropriate to reach the optimum condition. The antibacterial activity of the central point in third set was more than 1,000 times higher than that of E11, in first set.

• 호남수학학술지
• /
• 제4권1호
• /
• pp.147-154
• /
• 1982

Estimation methods of missing points for an experimental design are described. Formulae are provided for the estimation of missing points using matrix notation. The correct analysis of variance table is given. Estimation methods of a single missing point and two missing points in $2^{n}$ factorial designs are described.

• 대한기계학회논문집A
• /
• 제40권3호
• /
• pp.275-280
• /
• 2016

본 연구에서는 코일스프링의 동적 거동 분석을 위해 스프링 릴리즈 시험기를 설계하고 시험을 실시하였다. 시뮬레이션을 위해 집중 매개변수 스프링모델을 개발하였다. 실험계획법을 이용하여 코일스프링의 설계변수들을 최적화하였다. 2수준의 요인배치법을 사용하여 설계변수들의 민감도와 교호작용을 분석하였다. 민감도와 교호작용 분석결과를 통해 설계변수의 수준을 재배열하였다. 혼합수준 요인배치법을 이용하여 설계변수를 최적화 하였다. 최적설계 결과에 따르면, 스프링 조작기의 성능이 2.90 % 개선되었다.

• Korean Chemical Engineering Research
• /
• 제61권2호
• /
• pp.322-327
• /
• 2023

A design of experiments was evaluated in optimizing MOF-5 synthesis for acetylene adsorption. At first, mixture design was used to optimize precursor concentration, terephthalic acid, zinc acetate dihydrate and N,N-dimethylformamide. More specifically, 13 conditions with various molar ratios were designed by extreme vertices design method. After preparing the samples, XRD, N₂ physisorption and SEM analysis were performed for their characterization. Moreover, acetylene adsorption experiments were carried out over the samples under identical conditions. The optimal precursor composition for MOF-5 synthesis was predicted on a molar basis as follows: terephthalic acid : acetate dihydrate : dimethylformamide = 0.1 : 0.4 : 0.5. Thereafter, multi-level factorial design was designated to investigate the effect of synthesis reaction conditions such as temperature, time and stirring speed. By the statistical analysis of 18 samples designed, 4 reaction parameters were determined for additional adsorption experiments. Therefore, MOF-5 prepared under the synthesis time and temperature of 100 ℃ and 12 h, respectively, showed the maximum adsorption capacity of 15.1 mmol/g.

• International Journal of Korean Welding Society
• /
• 제1권2호
• /
• pp.36-44
• /
• 2001

To get the appropriate welding process variables, mathematical modeling in conjunction with many experiments is necessary to predict the magnitude of weld bead shape. Even though the experimental results are reliable, it has a difficulty in accurately predicting welding process variables for the desired weld bead shape because of nonlinear and complex characteristics of welding processes. The welding condition determined for the desired weld bead shape may cause the weld defect if the welding current/voltage/speed combination is improperly selected. In this study, the $2^{n-1}$ fractional factorial design method and correlation parameter were used to investigate the effect of the welding process variables on the fillet joint shape, and the multiple non-linear regression analysis was used for modeling the gas metal arc welding(GMAW）parameters of the fillet joint. Finally, a fuzzy rule-based method and a neural network method were proposed so that the complexity and non-linearity of arc welding phenomena could be effectively overcome. The performance of the proposed neuro-fuzzy system was evaluated through various experiments. The experimental results showed that the proposed neuro-fuzzy system could effectively check the welding conditions as to whether or not weld defects would occur, and also adjust the welding conditions to avoid these weld defects.

• 상하수도학회지
• /
• 제25권3호
• /
• pp.359-366
• /
• 2011

The feasibility of using volcanic ash for lead ion removal from wastewater was evaluated. The adsorption experiments were carried out in batch tests using volcanic ash that was treated with either NaOH or HCl prior to the use. Volcanic ash dose, temperature and initial Pb(II) concentration were chosen as 3 operational variables for a $2^3$ factorial design. Ash dose and concentration were found to be significant factors affecting Pb(II) adsorption. The removal of Pb(II) was enhanced with increasing volcanic ash dose and with decreasing the initial Pb(II) concentration. Pb(II) adsorption on the volcanic ash surface was spontaneous reaction and favored at high temperatures. Calculation of Gibb's free energy indicated that the adsorption was endothermic reaction. The equilibrium parameters were determined by fitting the Langmuir and Freundlich isotherms, and Langmuir model better fitted to the data than Freundlich model. BTV(base-treated volcanic ash) showed the maximum adsorption capacity($Q_{max}$) of 47.39mg/g. A pseudo second-order kinetic model was fitted to the data and the calculated $q_e$ values from the kinetic model were found close to the values obtained from the equilibrium experiments. The results of this study provided useful information about the adsorption characteristics of volcanic ash for Pb(II) removal from aqueous solution.

• Journal of Korean Society for Atmospheric Environment
• /
• 제24권E2호
• /
• pp.83-91
• /
• 2008

This work investigated the methodology to simultaneously optimize the ozone and relative humidity composition for the $NO_x$ degradation using soil biofilter. Experiments were made as a function of inlet ozone concentration ($0{\sim}1,770\;ppb$) and relative humidity ($38{\sim}81%$). Factorial design ($2^2+3$) and response surface methodology by central composite designs were used to examine the role of two factors and optimal response condition on $NO_x$ degradation. It was found that a second-order response surface model can properly interpret the experimental data with an $R^2$-value of 0.9730 and F-value of 71.83, based on which the maximum $NO_x$ degradation was predicted up to 92.8% within our experimental conditions.

• Korean Chemical Engineering Research
• /
• 제46권4호
• /
• pp.756-763
• /
• 2008

본 연구에서는 잉크젯용 전도성 금속 나노 잉크 개발을 목표로 통계적인 실험과 분석을 진행하여 재현성 있는 고품질의 은 나노 입자를 합성할 수 있는 기술을 개발하고자 하였다. 은 나노 입자는 상용 수계분산제 Daxad19를 이용한 용액 환원침전법을 통해 0.3 M의 고농도로 합성되었다. 합성에 주요한 영향을 주는 6개의 인자를 선정한 후 실험 계획법(Design-of-experiment)을 통해 실험을 수행하였다. 합성된 은 입자는 SEM, TEM, UV-Visible 등의 분석법을 이용하여 입자크기 및 분포와 분산도 등을 측정하였으며 통계 프로그램인 Minitab으로 이를 최적화하였다. 통계적인 실험계획 및 분석은 2차 부분요인분석법(2k-fractional factorial design)과 반응표면분석법인 박스-벤켄법(Box-Behnken design)으로 진행하였다. 이를 통한 합성 최적화로 평균입경 $30nm{\pm}10%$를 가진 구형의 은 나노 입자를 합성하였다. 또한 본 연구에서는 실험 결과 해석을 통해 환원침전법에서의 입자크기 및 형상 제어의 방식도 실험적으로 밝혀냈다.