• Journal of the Society of Disaster Information
• /
• v.16 no.1
• /
• pp.163-177
• /
• 2020

Purpose: While it is very important to maintain facilities recently, the introduction and its application of high technology in the facility maintenance industry has increased. It is necessary for high technology to secure reliability through the verification and certification system of diagnostic equipment to have an effective impact in the field, but there is difference between the industry's perspective and realistic level of technology apart from social demand for the system of the system. This paper dealt with the introduction of a verification and certification system for rational facility diagnostic equipment with the opinion survey on managers about the current situation. Method: Survey is carried out targeting managers in the maintenance and construction regarding the necessity and urgency of introducing a verification and certification system to promote the introduction and its application of high technology of diagnostic equipment and facility inspection. Also, the introduction to a verification and certification system was reviewed for advanced facility diagnostic equipment through foreign research about similar systems and comparative analysis of similar systems related to the certification of 21 domestic equipment. Result: It showed that, regarding the application of high technology, it is necessary for most managers to introduce high technology such as drones, robots, etc., in the maintenance industry, and when high technology is introduced, it will have a considerable effect in the field. On the other hand, the current technology level in Korea is relatively low, so it turned out to take a certain amount of time for the application of technology. Also, it was found that the management of reliable facility diagnostic equipment will be possible through the introduction of the verification and certification system for facility diagnosis equipment. Meanwhile, the survey is conducted on similar systems about foreign and domestic diagnosis and measuring equipment, etc., but there is no system to verify and certify equipment applied with high technology directly to facility diagnosis maintenance. However, because Japan has a system of verifying the performance of diagnostic equipment and South Korea has 21 similar inspection and diagnostic equipment certification systems among 186 certification systems, it is considered to be possible to design systems which utilize them. Conclusion: According to the managers' opinion, it seems that the introduction of the system supporting the application of 4th industrial technology for the equipment and the use of the equipment with high reliability has sufficient validity. However, because our high technology level is undervalued compared to the urgency, the system for checking high technology facilities and certifying diagnostic equipment should be to be implemented in form of escalation considering technical use and verification level. Apart from the introduction of the verification and certification system, it is necessary for special investment, support and efforts to promote advanced facility diagnostic equipment.

• 한국정보통신설비학회:학술대회논문집
• /
• 2007.08a
• /
• pp.215-218
• /
• 2007

In this paper, we have analyzed the effects from the change of separation distance between grounding equipment at end of telecommunication line and the inducting facilities in power inducting situation. In the result of measurement, we can see that as the separation distance between grounding equipment ant end of telecommunication line and the inducting facility become longer, the induced noise level and PIF level is decreased. From the another experiment results about the effect of changing the impedance size in both ends of telecommunication line, however, we already knew that as the ground impedance at either end of the telecommunication line become grower, the noise level is increased, and as the ground impedance at either end of the telecommunication line become smaller, the noise level is decreased. Hence we can not define the relationship exactly between separation distance from inducting facility to inducted facility and the induced noise level because when the grounding equipment is moved, its impedance size is changed too. In conclusion, changing the separation distance between grounding equipment at end of telecommunication line and the inducting facilities have not influence on the induced noise level.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.13 no.10
• /
• pp.812-816
• /
• 2000

It is very important to understand the correlation of between inter dielectric(ILD) CMP process and various facility factors supplied to equipment to equipment system. In this paper, the correlation between the various facility factors supplied to CMP equipment system and ILD-CMP process was studied. To prevent the partial over-polishing(edge hot-spot) generated in the wafer edge area during polishing, we analyze various facilities supplied at supply system. With facility shortage of D.I water(DIW) pressure, we introduced an adding purified $N_2$(P$N_2$)gas in polishing head cleaning station for increasing a cleaning effect. DIW pressure and P$N_2$gas factors were not related with removal rate, but edge hot-spot of patterned wafer had a serious relation. We estimated two factors (DIW pressure and P$N_2$gas) for the improvement of CMP process. Especially, we obtained a uniform planarity in patterned wafer and prohibited more than 90% wafer edge over-polishing. In this study, we acknowledged that facility factors supplied to equipment system played an important role in ILD-CMP process.

• Nuclear Engineering and Technology
• /
• v.50 no.3
• /
• pp.478-487
• /
• 2018

Pyroprocessing technology has been regarded as a promising solution for recycling spent fuel in nuclear power plants. The Korea Atomic Energy Research Institute has been studying the current status of equipment and facilities for pyroprocessing and found that existing facilities are manually operated; therefore, their applications have been limited to laboratory scale because of low productivity and safety concerns. To extend the pyroprocessing technology to a commercial scale, the facility, including all the processing equipment and the material-handling devices, should be enhanced in view of automation. In an automated pyroprocessing facility, a supervised control system is needed to handle and manage material flow and associated operations. This article provides a preliminary design of the supervising system for pyroprocessing. In particular, a manufacturing execution system intended for an automated pyroprocessing facility, named Pyroprocessing Execution System, is proposed, by which the overall production process is automated via systematic collaboration with a planning system and a control system. Moreover, a simulation-based prototype system is presented to illustrate the operability of the proposed Pyroprocessing Execution System, and a simulation study to demonstrate the interoperability of the material-handling equipment with processing equipment is also provided.

• Journal of the Korean Institute of Educational Facilities
• /
• v.18 no.5
• /
• pp.23-33
• /
• 2011

To ensure the effective operation of a curriculum, facilities and equipments should be properly supported. Therefore, changes are required for educational facilities in accordance with the curriculum, revised 10 times in total from 1945 to 2011, but it's true that the facility and equipment laws, which are the standards of facility and equipment changes, did not adapt to the changes. After 'the Act on Standards of School Facilities' was repealed, 'the Act on Establishment and Operation of the Schools,' the corresponding law for the purpose of spatial configuration for teaching and learning methods, was enacted in Sept. 1997. This law has been active for 14 years and revised 11 times thereafter. It has also been decided to often revise the curriculum, so the 7th National curriculum has undergone 6 times of minor revisions. Among them, the most recently revised 2009 curriculum is to be applied for elementary school 1st and 2nd grade, middle school 1st grade, and high school 1st grade from the beginning of this year of 2011. Hereupon, the purpose of this study is to research on the revisions of the school facility and equipment standards which can support the curriculum revised in 2009 and thereafter by examining classrooms and facilities as the learning space that can respond to the changes of school functions and systems with curriculum transition, of teaching and learning systems, and of subjects.

• Proceedings of the KIEE Conference
• /
• 2008.09a
• /
• pp.305-307
• /
• 2008

Inundation of substation and ground power equipment breaks out every summer season in low-lying downtown and low-tying shore by heavy rain, typhoon and tidal wave. In case inundation excluding the exchanging cost of equipment, it occurs a great economic and social loss owing to recovery time and events of electric shock occur by inundation electrical equipment (Pad-mounted Transformer and Switch). So we research the flooding prevention countermeasures of electrical facility and Transformer Vault on Foreign. We conform the site facility and related regulation for flooding prevention on Foreign.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 2006.11a
• /
• pp.332-335
• /
• 2006

This paper considers a facility location problem, which is concerned with locating facilities on a supply chain network and installing the associated equipments at the facilities to meet a given set of demands. The objective function is to minimize the sum of setup cost (facility opening cost and equipment installation cost), operation cost, and distribution cost. For the equipments, various choices of equipment modes need to be determined. Moreover, in the problem, overwork is allowed each facility but at expensive operation cost. The proposed problem is characterized as being NP-hard problem, so that a heuristic algorithm is derived. In order to evaluate the performance of the proposed algorithm, computational experiments with various numerical instances are conducted.

• Korean Journal of Organic Agriculture
• /
• v.21 no.3
• /
• pp.305-319
• /
• 2013

In this study, it is intended that utilize the LCA (Life Cycle Assessment) method, to evaluate the environmental impact of wood pellet manufacturing facility. As mentioned above, wood pellet manufacturing facility of 20 has produced wood pellets as a raw material sawdust and wood in our country. In this study, in order to feature manufacturing process of wood pellets that resemble almost necessary to analyze evenly size and characteristics of various equipment whether these reasonable, the characteristics of the equipment may be different, the production of 20 places I surveyed the facility one central timber distribution center one large scale most of the equipment.

• Proceedings of the Safety Management and Science Conference
• /
• 2009.11a
• /
• pp.187-201
• /
• 2009

Semiconductor industry is based on equipment industry and timing industry. In particular, semiconductor process is very complex and as semiconductor-chip width tails and is becoming equipment gradually more as a high technology. Equipment operation is primarily engaged in semiconductor manufacturing (engineers and operator) of being conducted by, equipment errors have also been raised. Equipment operational data related to the error of korea occupational safety and health agency were based on data and production engineers involved in the operator's questionnaire was drawn through the error factor. Equipment operating in the error factor of 9 big item and 36 detail item detailed argument based on the errors down, and 9 big item the equipment during operation of the correlation error factor was conducted. Each of the significance level was correlated with the tabulation and analysis. Using the maximum correlation coefficient, the correlation between the error factors to derive the relationship between factors were analyzed. Facility operating with the analysis of error factors (big and detail item) derive a relationship between the model saw. The end of the operation of the facility in operation on the part of the two factors appeared as prevention. Safety aspects and ergonomics aspects of the approach should be guided to the conclusion.

• Korean Journal of Community Nutrition
• /
• v.11 no.3
• /
• pp.374-382
• /
• 2006

The purpose of the study was to investigate the effects of the characteristics of dietitians, the characteristics of school food services, equipment ratio of HACCP facility/equipment and perception of barriers to HACCP implementation on external and internal audit of food safety/sanitation management performance in school food service. An e-mail survey was conducted with 144 dietitians in Gyeongbuk Province. A response rate was 57.6% (N = 83) and data was analyzed using SPSS windows (ver. 12.0). Dietitian perceived facilities/equipment-related and stakeholder-related as the big barriers in implementing a HACCP system. Total scores of sanitation/safety management performance for external and internal audit were similar at 92 and 91 out of 100, respectively. 'Facilities/equipment' and 'HACCP system' categories in both external and internal audit were rated the lowest. As dietitian perceived facilities/equipment-related (p < 0.001) and stakeholder-related (p < 0.05) barriers to HACCP implementation were greater, the scores of the external and internal audits were significantly lower. As dietitian perceived barriers for all categories were greater, the scores of internal audits were significantly lower (p <0.05). As a result of multiple regression analyses, the scores of the external audit was positively associated with career as a school food service dietitian, but was negatively associated with barriers related to facility/equipment, while the scores of the internal audit was negatively associated with barriers related to facility/equipment and employees. This study suggests that supporting programs on securing the facilities/equipment and employee training are needed for successful HACCP implementation in school food service.