• Journal of the Korean Data and Information Science Society
• /
• v.28 no.1
• /
• pp.75-86
• /
• 2017

The facial palsy is one of the most common illness in Western-Korean collaborative treatment (hereinafter "collaborative treatment"). The purpose of this study is to analyze facial palsy patients'collaborative treatment use patterns. By analysing the 2014 National Health Insurance Review and Assessment Patient Sample Data (NPS 2014) with the episode of care unit, we have found the following results. First, the collaborative treatment is preferred by patients over 50 years old and female. Second, western medicine mainly focuses on diagnosis and medical examination while korean medicine and collaborative treatment focus more on treatment activity. Third, western medicine showed the shortest treatment period, followed by korean medicine and collaborative treatment. However, the cost of medical treatment per day is highest in western medicine. The analysis of the use patterns of collaborative treatment shown in the study is expected to provide a direction for the development of clinical practice guidelines and the establishment of medical policies in the future.

• The korean journal of orthodontics
• /
• v.27 no.6 s.65
• /
• pp.905-916
• /
• 1997

The purpose of this investigation were to evaluate facial vortical changes occurring in patients treated orthodontically with first premolar, second remolar and second molar extractions : to compare these changes with those occurring in patients treated orthodontically without extractions : and finally, to evaluate the effects of extractions in facial vortical changes. Cephalometric records of 50 male & female nonextraction patients and 88 male & female extraction patients were obtained from the department of orthodontics at Chosun University, College of Dentistry. The second molar fully erupted pPatients to have little variation according to growth were chosen as the sample for this investigation. For comparisons, the samples of 88 male & female extraction patients were subdivided into 42 first premolar extraction, 24 second premolar extraction, and 22 second molar extraction patients. Fourteen cephalometric measurements were selected to examine whether orthodontic extraction treatment led to vertical changes or not. The pretreatment and posttreatment lateral cephalographs were taken on the same radiographic unit. $SPSS/PC^+$ statistical program was used to compare and to analyze the changes between 'before & after' orthodontic treatment. The results of this study were as follows. 1. There were no statistical significances in any cephalometric measurements between 'before & after' orthodontic treatment regardless of orthodontic extractions for each group. 2. On average, the upper 6 to palatal Plane and the lower 6 to mandibular plane after orthodontic treatment were increased in all group. This means most of orthodontic mechanics are extrusive in nature. Especially, in orthodontic extraction. cases, it may be caused by orthodontic mechanics for space closure and alignments. 3. On average, in the second molar extraction group, the facial vertical dimension was increased after orthodontic treatment. It nay be induced as a result of moving the molars distally to gain enough space to correct the molar relationship and to simultaneously improve the deep bite. 4. There was no statistical significance between orthodontic extractions and facial vertical changes. This means that orthodontic extractions have no influence on facial vortical changes. 5. The cephalometric measurements with statistical significance in ficial vertical changes for each group were PP-MP, Op-MP, $\underline{1}$ to PP and $\overline{1}$ to MP.

• Journal of Institute of Control, Robotics and Systems
• /
• v.15 no.4
• /
• pp.379-384
• /
• 2009

A human gaze detection and tracing method is importantly required for HMI(Human-Machine-Interface) like a Human-Serving robot. This paper proposed a novel three-dimension (3D) human gaze estimation method by using a face recognition, an orientation estimation and SVMs (Support Vector Machines). 2,400 images with the pan orientation range of $-90^{\circ}{\sim}90^{\circ}$ and tilt range of $-40^{\circ}{\sim}70^{\circ}$ with intervals unit of $10^{\circ}$ were used. A stereo camera was used to obtain the global coordinate of the center point between eyes and Gabor filter banks of horizontal and vertical orientation with 4 scales were used to extract the facial features. The experiment result shows that the error rate of proposed method is much improved than Liddell's.

• Proceedings of the Korean Information Science Society Conference
• /
• 1998.10c
• /
• pp.408-410
• /
• 1998

동영상에서 얼굴의 움직임을 이해하는 것은 인간과 컴퓨터간의 상호작용을 이루는 분야에서 중요한 문제이다. 본 논문에서는 2차원 동영상에서 얼굴요소 및 얼굴의 움직임을 측정하기 위해 optical flow를 통해 매개변수화된 움직임 벡터를 추출한다. 그리고 나서, 이를 소수의 매개변수들의 조합으로 만들어 얼굴의 움직임에 대한 정보를 묘사할 수 있게 하였다. 매개변수화된 움직임 벡터는 얼굴 및 얼굴 요소의 특징에 따라 다른 벡터 모델을 사용한다. 2차원 동영상에서 매개변수화된 움직임 벡터는 매 프레임마다 갱신되어 각 프레임에서 얼굴 및 얼굴 요소의 위치를 파악한다. 또한, 갱신된 벡터의 매개변수 조합으로 만들어 확인된 움직임에 대한 정보가 3차원 얼굴모델에 전달되며 3차원 얼굴 모델의 단위행위(Action Unit)와 연결되어 2차원 동영상에서의 얼굴 움직임을 합성할 수 있게 하였다.

• Journal of radiological science and technology
• /
• v.23 no.2
• /
• pp.69-73
• /
• 2000

This paper studied a C-arm's exposure condition and measured scatter rays by thickness and distance. This study reached the following conclusion. 1. Approrimately exposure dose for a patient using fluoroscopy is as follows : 2. Mostly, an operating room was not shielding by lead and operator put on only apron without thyroid and facial part protection. 3. 0.5 mmPb equivalent's apron shielded about 99% of scattered rays at 60 cm from x-ray tube. 4. Scattered rays are depended on distance and thickness so operators are should be careful when using fluoroscopy by C-arm and if possible use high frequency equipment that has a large output.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2002.04a
• /
• pp.265-268
• /
• 2002

얼굴은 성별, 나이, 인종에 따라 다양한 특징을 가지고 있어서 개개인을 구별하기가 쉽고 내적인 상태를 쉽게 볼 수 있는 중요한 도구로 여겨지고 있다. 본 논문은 얼굴표정 애니메이션을 위한 효과적인 방법으로 실제얼굴의 피부조직 얼굴 근육 등 해부학적 구조에 기반한 근육기반모델링을 이용하는 방법을 소개하고자 한다. 제안하는 시스템의 구성은 얼굴 와이어프레임 구성과 폴리곤 메쉬분할 단계, 얼굴에 필요한 근육을 적용시키는 단계, 근육의 움직임에 따른 얼굴 표정생성단계로 이루어진다. 와이어프레임 구성과 폴리곤 메쉬 분할 단계에서는 얼굴모델을 Water[1]가 제안한 얼굴을 기반으로 하였고, 하나의 폴리곤 메쉬를 4등분으로 분할하여 부드러운 3D 얼굴모델을 보여준다. 다음 단계는 얼굴 표정생성에 필요한 근육을 30 개로 만들어 실제로 표정을 지을 때 많이 쓰는 부위에 적용시킨다. 그 다음으로 표정생성단계는 FACS 에서 제안한 Action Unit 을 조합하고 얼굴표정에 따라 필요한 근육의 강도를 조절하여 더 자연스럽고 실제감 있는 얼굴표정 애니메이션을 보여준다.

• Bulletin of the Korean Chemical Society
• /
• v.13 no.5
• /
• pp.491-498
• /
• 1992

Chelating triphosphines were applied to freeze the fluxionality and to minimize the number of isomers found in the monophosphine analogues and this technique was proved to be useful. RuH(NO)$P_3$($P_3$; Cyttp, ttp and etp) complexes were characterized to have similar trigonal bipyramidal structures with linear NO groups. Cyttp prefers to have a meridional geometry while etp prefers a facial one and ttp complexes are mixture of these two isomers. The crystal structure of RuH(NO)(Cyttp) has been determined to have a distorted trigonal bipyramidal structure with a linear NO in the equatorial plane. The crystals are orthorhombic, space group $P_{nma}$, with unit cell dimensions a = 16.356(2), b = 20.474(2), c = 10.915(l) ${\AA}$, V = 3655 ${\AA}^3$, Z = 4, R = 0.035 and $R_w$ = 0.034 for the 2900 intensities with $F_o^2 >3{\sigma}(F_o^2)$ and the 208 variables.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.49 no.1
• /
• pp.49-52
• /
• 2023

Osteoblastoma is a rare benign neoplasm formed by osteoid tissue and well-vascularized bone that occurs mainly in children and adolescents. It appears primarily in the long bones, vertebral column, and small bones of the hands and feet, and not typically in the skull and maxillary bones. The purpose of this study is to present the case of an 8-year-old girl with a diagnosis of right mandibular osteoblastoma and a review of the relevant literature. The goals of treatment were to preserve dental occlusion, masticatory function and facial symmetry while minimizing the effects on patient body image and quality of life. Osteoblastoma, although it is benign, can be aggressive, and its treatment will depend on the timing of diagnosis, size and location. Early diagnosis is essential to avoid not only radical surgery as in the case presented, but also to help minimize the risk of possible relapse and potential malignancy of a benign osteoblastoma.

• Journal of Korea Game Society
• /
• v.9 no.5
• /
• pp.137-144
• /
• 2009

This paper predicts 6 facial regions that may have sharply different scattering properties, rendering the face more realistically based on their diffusion profiles. The scattering properties are acquired in the form of high dynamic range by photographing the pattern formed around an unit ray incident on facial skin. The acquired data are fitted to a 'linear combination of Gaussian functions', which well approximates the original diffusion profile of skin and has good characteristics as the filter. During the process, to prevent its solutions from converging into local minima, we take advantage of the genetic algorithm to set up the initial value. Each Gaussian term is applied to the irradiance map as a filter, expressing subsurface scattering effect. In this paper, to efficiently handle the maximum 12 Gaussian filterings, we make use of the parallel capacity of CUDA.

• Journal of Broadcast Engineering
• /
• v.25 no.4
• /
• pp.537-544
• /
• 2020

This paper proposes the creation of an android robot head based on the facial action coding system(FACS), and the generation of emotional expressions by FACS. The term android robot refers to robots with human-like appearance. These robots have artificial skin and muscles. To make the expression of emotions, the location and number of artificial muscles had to be determined. Therefore, it was necessary to anatomically analyze the motions of the human face by FACS. In FACS, expressions are composed of action units(AUs), which work as the basis of determining the location and number of artificial muscles in the robots. The android head developed in this study had servo motors and wires, which corresponded to 30 artificial muscles. Moreover, the android head was equipped with artificial skin in order to make the facial expressions. Spherical joints and springs were used to develop micro-eyeball structures, and the arrangement of the 30 servo motors was based on the efficient design of wire routing. The developed android head had 30-DOFs and could express 13 basic emotions. The recognition rate of these basic emotional expressions was evaluated at an exhibition by spectators.