• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.21 no.4
• /
• pp.353-359
• /
• 1999

Purpose : A new method of lateral cephalometric analysis for midface, focusing on zygomatic bone, was created in this study, and measured in Korean adults. The purposes of this study are understanding about new approach for midfacial depression, especially zygomatic bone, and using to make adequate diagnosis and treatment plan. Materials and methods : In this study, esthetic Korean adults, 25 males and 25 females who were between $0^{\circ}$ and $4^{\circ}$ in ${\angle}ANB$, and between 62% and 70% in P/A facial height ratio, and had normal overbite and overjet, were used. Orbitale(Or) and Soft tissue orbitale(Or') were used for indicators of anteroposterior position of zygomatic area. And, mean value and standard deviation of linear and angular measurements, and ratio about each linear measurements, were obtained. then, standard deviation diagram - wiggle diagram - was made for visualization of results. Results : Mean values, standard deviations and ranges of 19 measurements were obtained, and among them, 5 linear measurements that had large standard deviation were excluded and the others were used for making standard deviation diagram. In standard deviation diagram, the following results were obtained. 1. If the measurements are located on more left side of mean-value-vertical -line, the potential of midfacial hypoplasia are stronger, especially zygomatic area. 2. If the measurements are located on more right side of mean-value-vertical-line, the potential of midfacial hypoplasia are decreased. Conclusion : This study presented a new method of lateral cephalometric analysis focusing on zygomatic bone in Korean adults. We expect that the results of this study can be used as parameter when clinicians make decisions about diagnosis and treatment plan for rehabilitation of esthetics and function. But, it is necessary to prove its usefulness, and to further evaluate the results.

• The Journal of Korean Academy of Prosthodontics
• /
• v.57 no.3
• /
• pp.280-287
• /
• 2019

In the oral cavity, the teeth undergo wear and corrosion throughout their lives. Progressive and constant tooth wear is a natural phenomenon of aging, but wear and corrosion due to specific factors are pathological factors. It can cause pathological damage of the occlusal surface, aesthetic problems, dimensional loss and jaw joint disorders. This case is a 26-year-old female patient with general tooth abrasion and erosion on the entire dentition. Diagnostic wax-up was fabricated based on the information including digital facial analysis, physiological stabilization, and evaluation of anterior crown length. Through the digital analysis, the necessary guides for crown lengthening were prepared and the mastication function and esthetics were evaluated by using temporary crowns. Definitive prosthesis was fabricated with the zirconia restorations. The results were satisfactory when they were observed 3 months of follow-up.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.35 no.3
• /
• pp.170-179
• /
• 2019

The prosthodontic treatments in maxillary anterior teeth focus on achieving esthetic appearances. It is possible to improve the esthetic appearance by adjusting the shape, arrangement, and color of the maxillary anterior teeth. For anterior teeth restoration, it is necessary to evaluate the relationship of teeth, lip and gingival architecture with the facial profile of patient. Also, clinician needs to fully understand what the patient wants to. DSD (digital smile design) concept can be applied as a tool to improve communication with the clinician, technician and patient. In addition, DSD can help to meet the needs of the patient. In this case, it was impossible to achieve symmetry due to congenital missing of maxillary central incisor. The definitive treatment goal was to get the harmony of maxillary anterior teeth, lip and the patient's face. This case report describes that the patient and clinician got the satisfying esthetic outcome by using DSD.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.35 no.3
• /
• pp.191-198
• /
• 2019

This case report presents a closed hollow bulb obturator made by 3D printing for a maxillectomy patient. Final impression was taken according to the instructions and impression trays provided by the Magic $denture^{TM}$ system. Vertical dimension, facial appearance, and retention had been checked with the try-in denture. The try-in denture was corrected and adjusted to fulfill the demand of the patients, then these were reflected to the final design of the denture. The defect area was designed as a closed hollow bulb shape to reduce the weight and to provide uniform thickness of the denture. The patient satisfied with the esthetics and function of the denture.

• The korean journal of orthodontics
• /
• v.37 no.4
• /
• pp.272-282
• /
• 2007

The purposes of this study were to evaluate the nasolabial angle changes between closed lip position at centric occlusion and relaxed lip position at which the bite is open so that the lips do not touch and to elucidate the significance of the relaxed lip position for dentofacial diagnosis. Methods: The subjects consisted of 60 (35 Males, 25 Females) skeletal Class III malocclusion adult patients (mean age 23.3 years) with anterior crossbite. Results: In Class III malocclusion adult patients, there were significant differences in the nasolabial angle changes between closed lip position and relaxed lip position. Using the cluster analysis, the subjects were divided into three groups according to the pattern of nasolabial angle change: Group 1 (N = 27, 45%, $-8\;{\sim}\;1$), Group 2 (N = 30, 50%, $2^{\circ}\;{\sim}\;17$), and Group 3 (N = 3, 5%, over 18). Conclusion: The results showed that the pattern of the nasolabial angle change between closed lip position and relaxed lip position varies in skeletal Class III malocclusion patients. Thus, relaxed lip position should be taken into account when diagnostic records are obtained and analyzed to accurately to evaluate the facial soft tissues and predict facial esthetics after surgical-orthodontic treatment.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.26 no.6
• /
• pp.628-635
• /
• 2000

The purpose of this study was to evaluate the result after 2-phase surgical-orthodontic treatment without preoperative orthodontic treatment for the skeletal Cl III malocclusion patient and to obtain an adequate protocol on the bases of this result. This retrospective study of ten patients who underwent 2-phase treatment were done to evaluate 1) the surgical stability and relapse pattern 2) the facial esthetics 3) the TMJ problem 4) the total time of the treatment. Results were followed : 1) The horizontal relapse of the mandible was 26.8% and didn't show significant differences compared to the conventional 3-phase treatment. But, it was considered that this amount of relapse was the sum of true relapse and autoratation of mandible due to decreased vertical dimension during orthodontic treatment. 2) It was estimated that there's no difference on the ratio of anterior facial height between the subjects and the normal patients. On the horizontal analysis, the mandible of the subjects was located more anteriorly than that of the normal patients. This result showed that there was a need for the accurate preoperative esthetic evaluation and the additional methods for reducing the relapse due to the occlusal interference. 3) Wide variation was noted on the TMJ symptoms of the subjects, however, it was estimated that there's no significant differencees of symptoms compared to that of the conventional 3-phase treatment on literatures. 4) The average of the overall period of treatment was 20.8 months and we obtained reduction of the treatment time compaired to 3-phase treatment on many literatures. Most of the results of this study were similar to the findings of the 3-phase treatment(preoperative orthodontic-orthognathic surgery-postoperative orthodontic), but total time of the treatment was shorter in patients with 2-phase treatment than in those with the conventional 3-phase treatment. With 2-phase treatment, we experienced many advantages compared to the conventional method considering that it was favarable conditions for the teeth, it had the flexibility for the treatment, and it could be the adequate treatment approach for the stomatognathic system. Although this retrospective pilot study had some limitations, due to small samples, the authors would hope that it could serve as a guide for the future researches, and the clinical applications.

• The Journal of Korean Academy of Prosthodontics
• /
• v.53 no.3
• /
• pp.262-275
• /
• 2015

The treatment of areas demanding esthetic requirements, such as maxillary anterior teeth, should take into account the achievement of a healthy, harmonious to the surrounding tissue, and an attractive smile line. In this case report, smile line, soft tissue and hard tissue morphology, and the anatomy and proportion of the tooth, must be considered. In patients with unesthetic maxillary anterior ratio due to inadequate gingival contour and diastema caused by peg lateralis, it would be challenging to achieve an esthetic restoration by orthodontic treatment alone. In such case, after orthodontic treatment, dento-gingivo-facial compositional diagnosis and analysis, followed by gingivectomy and prosthodontic restoration is needed to improve the interdental mesial/distal, width/length ratio to achieve a satisfactory esthetic result. In addition, when improving the tooth proportion of peg lateralis by prosthodontic treatment, Porcelain laminate veneer (PLV), which results in less tooth structure loss, reproduction of similar shade to that of the proximal tooth and high transparency, is recommended. This case report demonstrates esthetic improvements by prosthodontic restoration through systematic diagnosis and treatment procedure in patients with unesthetic maxillary anterior proportion after orthodontic treatment due to peg lateralis by means of two female patients aged twenty years old.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.30 no.3
• /
• pp.283-291
• /
• 2008

The malar mound defines the contour of the lateral face between the inferior orbital rim and the mandible, and hypoplasia or asymmetry of this region is readily noticeable. A flat, hypoplastic malar eminence can make the face blunt and wearisome, which contributes to a premature aged appearance. Patients with congenital or traumatic flattening of the malar eminence can obtain esthetic improvement with implants. Indications for placement of malar implants to improve the appearance of subtle flattening or to enhance the esthetic harmony of a patient's face have been suggested in several studies. Many augmentation materials, such as silicone, proplast, polyamide, and porous polyethylene implants have been used. Many methods of localization have been described, the key to proper placement of the implants lies in a through understanding of the esthetics of the malar mound. From August 2001 to June 2007, 12 patients with malar depression who visited the Department of Oral and Maxillofacial Surgery, Chonnam National University Hospital were treated by augmentation malarplasty with Porous polyethylene. The location and amount of augmentation are determined by preoperative interview, physical examinations, facial models and radiographic findings. 12 patients were satisfied with the results of augmentation malarplasty and severe complications were not occurred.

• The Journal of Korean Academy of Prosthodontics
• /
• v.40 no.5
• /
• pp.484-492
• /
• 2002

The selection of the maxillary anterior artificial teeth is made primarily for esthetics and they must be in harmony with the surrounding oral environment. However the selection of artificial teeth is based on the large degree of subjective judgement or the dentists, therefore, this is one of the most unscientific processes. This study was performed to determine clinically whether there is correlation among the width of the maxillary central incisor(WMCI), the intercanine distance (ICD) the facial width(FW), and the interalar nasal width(IAW) in Korean adults, and to provide the selection standards for the maxillary anterior artificial teeth. The casts were obtained from 91 undergraduate dental students(49 males and 42 females) with Angle's class I occlusion presenting well-arranged intact anterior teeth. The WMCI and ICD were measured on the casts with a vernier calipers($Miltex^{(R)}$, Germany). The photographic procedures under standardized conditions were performed to record each subject's frontal face using digital camera($Olympus^{(R)}$, C-2500L, Japan). The FW and IAW were measured with image analyzer($Image-Pro^{(R)}$ PLUS. media cybermetrics. USA). The results were obtained as follows : 1. The mean WMCI was $8.11{\pm}0.67mm$, ICD was $37.88{\pm}2.15mm$, FW was $141.29{\pm}5.84mm$. and IAW was $37.85{\pm}2.29 mm$. 2. The ratios of FW/WMCI, FW/ICD, IAW/ICD were 17.4, 3.7, 1.0 respectively. 3. All measurements(WMCI, ICD, FW, and IAW) of male group were longer than those of female group significantly in Student's t-test(p<0.01). 4. There was significant correlation between WMCI, ICD, FW, and IAW in Pearson's correlation analysis(p<0.01). 5, The relationship between IAW and ICD shows the strongest correlation among six combinations in linear regression analysis($R^2$=0.753, Y=7.046+0.815X). The FW and IAW could be very reliable guides for the selection of the maxillary anterior artificial teeth.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.32 no.4
• /
• pp.324-331
• /
• 2010

The radial forearm free flap (RFFF) has become a workhorse flap as a means of reconstructing surgical defects in the head and neck region. We have transferred 12 RFFFs with fasciocutaneous type on oral cavity defects in 12 patients after cancer resection and submucous fibrotic lesion ablation from 2005 to 2007 at Department of oral and maxillofacial surgery, Pusan National University Hospital. We reviewed retrospectively patients' charts and followed up the patients. Clinical analysis on the cases with RFFFs focusing on flap morbidity, indications and available vessels was done. The results of study are follows: 1. RFFF could be applied for all kind of defects after resection of tongue, floor of mouth, buccal mucosa, denuded bone of palate, maxilla, and mandible. 2. All free flaps could be used for primary reconstruction. The survival rate of 12 RFFFs was 92%. Partial marginal loss of the flaps was shown as 3 cases among 12 cases. Large size-vessels like superior thyroid artery, facial artery, internal jugular vein were favorable for microvascular anastomosis. 3. Parenteral nutrition instead of nasal L-tube also can be favorable for postoperative a week for better healing of the flap if the patients couldn't be tolerable with nasal tubing. 4. Donor sites with thigh skin graft were repaired with wrist band for 2 weeks. The complications included scarring, abnormal sensation on hand, and reduced grip strength in few patients, but those didn't induce major side effects. 5. Most RFFFs were well healed even if mortality rate of cancer patients was shown as 50% (5/10 persons). The mortality of patients was not correlated with morbidity of the flaps. We could identify the usefulness of RFFF for restoration of oral function, esthetics if the flap design, tissue transfer indications, and well controlled operation are proceeded.