• The korean journal of orthodontics
• /
• v.54 no.5
• /
• pp.274-283
• /
• 2024

Objective: To determine the correlation between dentoskeletal parameters related to craniofacial morphology and the upper airway (UA) volume. Methods: Cone-beam computed tomography images of 106 randomly selected orthodontic patients were analyzed using NemoFab Ortho software. The dentoskeletal variables assessed were anterior facial height (AFH), posterior facial height (PFH), PFH/AFH ratio, hyoid position, maxillary width (MW), and palatal depth. The UA volume (evaluation in anatomical regions and as a whole) was also assessed using the same software. We also evaluated potential differences in UA variables between age and sex groups. The correlation between the dentoskeletal parameters and UA volume was calculated using the Pearson correlation coefficient (R). Analysis of variance and Student's t test were performed to assess differences between age and sex for UA variables. Statistical analyses were performed using SPSS software (version 26 for Windows). Results: This study found that PFH, AFH, and MW were the dentoskeletal parameters most strongly correlated with UA volume. However, the ANB angle did not show any significant correlation with UA volume. Additionally, differences in UA volumes were observed between age groups. Sex differences were found in both the "8-12" and "≥ 16" age groups for oropharyngeal and pharyngeal volumes. Conclusions: In conclusion, our findings indicate a significant correlation between UA volume and dentoskeletal parameters, particularly those related to facial height and MW.

• Archives of Plastic Surgery
• /
• v.41 no.2
• /
• pp.163-170
• /
• 2014

Background The septal cartilage is the most useful donor site for autologous cartilage graft material in rhinoplasty. For successful nasal surgery, it is necessary to understand the developmental process of the nasal septum and to predict the amount of harvestable septal cartilage before surgery. Methods One hundred twenty-three Korean patients who underwent three-dimensional (3D) facial bone computed tomography (CT) were selected for evaluation of the midsagittal view of the nasal septum. Multiple parameters such as the area of each component of the nasal septum and the amount of harvestable septal cartilage were measured using Digimizer software. Results The area of the total nasal septum showed rapid growth until the teenage years, but thereafter no significant change throughout the lifetime. However, the development of the septal cartilage showed a gradual decline due to ossification changes with aging after puberty in spite of a lack of change in the total septal area. The area of harvestable septal cartilage in young adults was $549.84{\pm}151.26mm^2$ and decreased thereafter with age. Conclusions A 3D facial bone CT scan can provide valuable information on the septal cartilage graft before rhinoplasty. Considering the developmental process of the septal cartilage identified in this study, septal surgery should not be performed until puberty due to the risk of nasal growth impairment. Furthermore, in elderly patients who show a decreased cartilage area due to ossification changes, septal cartilage harvesting should be performed carefully due to the risk of saddle nose deformity.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.33 no.3
• /
• pp.227-237
• /
• 2007

Microglial cell activation is known to contribute to neuropathic pain following spinal sensory nerve injuries. In this study, I investigated its mechanisms in the case of trigeminal sensory nerve injuries by which microglial cell and p38 mitogen-activated protein kinase (p38 MAPK) activation in the medullary dorsal horn (MDH) would contribute to the facial pain hypersensitivity following mandibular nerve transection (MNT). And also investigated the changes of trigeminal ganglion neurons and ERK, p38 MAPK manifestations. Activation of microglial cells was monitored at 1, 3, 7, 14, 28 and 60 day using immunohistochemical analyses. Microglial cell activation was primarily observed in the superficial laminae of the MDH. Microglial cell activation was initiated at postoperative 1 day, maximal at 3 day, maintained until 14 day and gradually reduced and returned to the basal level by 60 days after MNT. Pain hypersensitivity was also initiated and attenuated almost in parallel with microglial cell activation pattern. To investigate the contribution of the microglial cell activation to the pain hypersensitivity, minocycline, an inhibitor of microglial cell activation by means of p38 MAPK inhibition, was administered. Minocycline dose-dependently attenuated the development of the pain hypersensitivity in parallel with inhibition of microglial cell and p38 MAPK activation following MNT. Mandibular nerve transection induced the activation of ERK, but did not p38 MAPK in the trigeminal ganglion. These results suggest that microglial cell activation in the MDH and p38 MAPK activation in the hyperactive microglial cells play an important role in the development of facial neuropathic pain following MNT. The results also suggest that ERK activation in the trigeminal ganglion contributes microglial cell activation and facial neuropathic pain.

• The korean journal of orthodontics
• /
• v.20 no.3 s.32
• /
• pp.427-446
• /
• 1990

The objective of this study was to understand the major changes of craniofacial dimensions and spatial growth pattern during the late embryonic and fetal period of human fetures. This study was performed with the selective materials of normal fetuses received from the Registry of Congenital Malformation of Seoul National University Hospital. The specimens consisted of nineteen embryos and sixty-six fetuses. The photomicrographs from mid-segittal sections of embryos were used for angular measurement, and the lateral cephalograms taken with soft X-ray were also measured in liners and angular aspects. All of the anatomical landmarks for the tracing of the photomicrographs and cephalograms were referred to the previous reports on literature. The sequential changes of prenatal craniofacial dimensions and agles were analysed statistically and discussed on the focus about the developmental growth directions of human ore-facial structure arised from heterogeneous origins. The results are as follows, 1) Cranial base angle was almost formed at about 6 weeks old embryos with the average angle of $127.4{\pm}6.33^{\circ}$ (n=3) and it was almost constant onwards. 2) The linear increase rates of anterior cranial base length and anterior facial height exceeded those of the posterior cranial base length and posterior facial height, and the maxilla grows more rapidly on the horizontal dimension than the vertical dmension during the fetal period. 3) The angular relationship between the anterior cranial base and palatal plane decreasedslightly during the fetal period, disclosing $11^{\circ}$ at 12th week gestation and $5^{\circ}$ at 41th weeks gestation. 4) Genial angle was maintained almost constantly at about $130^{\circ}$ during the fetal period from 12 weeks to 41 weeks of gestation.

• The korean journal of orthodontics
• /
• v.43 no.1
• /
• pp.42-52
• /
• 2013

The aim of this paper was to propose a new method of bimaxillary orthognathic surgery planning and model surgery based on the concept of 6 degrees of freedom (DOF). A 22-year-old man with Class III malocclusion was referred to our clinic with complaints of facial deformity and chewing difficulty. To correct a prognathic mandible, facial asymmetry, flat occlusal plane angle, labioversion of the maxillary central incisors, and concavity of the facial profile, bimaxillary orthognathic surgery was planned. After preoperative orthodontic treatment, surgical planning based on the concept of 6 DOF was performed on a surgical treatment objective drawing, and a Jeon's model surgery chart (JMSC) was prepared. Model surgery was performed with Jeon's orthognathic surgery simulator (JOSS) using the JMSC, and an interim wafer was fabricated. Le Fort I osteotomy, bilateral sagittal split ramus osteotomy, and malar augmentation were performed. The patient received lateral cephalometric and posteroanterior cephalometric analysis in postretention for 1 year. The follow-up results were determined to be satisfactory, and skeletal relapse did not occur after 1.5 years of surgery. When maxillary and mandibular models are considered as rigid bodies, and their state of motion is described in a quantitative manner based on 6 DOF, sharing of exact information on locational movement in 3-dimensional space is possible. The use of JMSC and JOSS will actualize accurate communication and performance of model surgery among clinicians based on objective measurements.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.13 no.3
• /
• pp.206-211
• /
• 2020

It is Face recognition is a very important process in image monitoring and it is a form of biometric technology. The recognition process involves many variables and is highly complex, so the software development has only begun recently with the development of hardware. Face detection technology using the CCTV is a process that precedes face analysis, and it is a technique that detects where the face is in the image. Research in face detection and recognition has been difficult because the human face reacts sensitively to different environmental conditions, such as lighting, color of skin, direction, angle and facial expression. The utility and importance of face recognition technology is coming into the limelight over time, but many aspects are being overlooked in the facial area detection technology that must precede face recognition. The system in this paper can detect tilted faces that cannot be detected by the AdaBoost detector and It could also be used to detect other objects.

• Industrial Engineering and Management Systems
• /
• v.11 no.2
• /
• pp.142-147
• /
• 2012

Individuals with autistic spectrum disorders (ASD) have difficulty inferring other people's feelings from their facial expressions and/or from situational cues, and therefore, they are less able to respond with prosocial behavior. We developed a computer-based training program to help teach the connection between facial-based or situation-based emotions and prosocial behavioral responses. An 8-year-old male school child with ASD participated in the study. In this program, he was trained to identify persons in need of help and appropriate prosocial responses using novel photo-based scenarios. When he misidentified emotions from photographs of another's face, the program highlighted those parts of the face which effectively communicate emotion. To increase the likelihood that he would learn a generalized repertoire of emotional understanding, multiple examples of emotional expressions and situations were provided. When he misidentified persons expressing a need for help, or failed to identify appropriate helping behaviors, role playing was used to help him appreciate the state of mind of a person in need of help. The results of the training indicated increases in prosocial behaviors during a laboratory task that required collaborative work. His homeroom teacher, using a behavioral rating scale, reported that he now understood another's emotion or situation better than before training. These findings indicate the effects of the training are not limited to the artificial experiment situation, but also carried over to his school life.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.20 no.1
• /
• pp.127-133
• /
• 2020

This paper deals with the development of a smart mirror to support changing hair styles. A key function of the service is the ability to synthesize the image into the user's face when the user chooses a desired hair image and virtually styling the hair. To check the effectiveness of the hair image synthesis function, the success rate measurement experiment of Haar-cascade algorithm's facial recognition was conducted. Experiments have confirmed that the facial recognition succeeds with a 95 percent probability, with both eyes and eyebrows visible to the subjects. It is the highest success rate. It confirmed that if either of the eyebrows of the subjects are not visible or one eyeball is covered, the success rate of facial recognition is 50% and 0% respectively.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.28 no.4
• /
• pp.643-648
• /
• 2001

Class III malocclusion usually becomes manifested at a very early age, most typically evidenced clinically by the appearance of either an edge-to-edge incisor relationship or an anterior crossbite. Anterior crossbite, by it-self, retards growth of maxilla, and accelerates growth of mandible. So, treatment should be started as early as the patient cooperates, removing any factors or forces that inhibit growth and development in the same physiologic maxillary displacement direction. The facial mask is effective in most developing Class III patients, because the appliance system affects virtually all areas contributing to a Class III malocclusion. Thus, the facial mask can be applied to most developing Class If cases regardless of the specific etiology. In these cases, the results were followed. Anterior crossbite was corrected by anterior movement of maxilla and downward backward rotation of mandible and simultaneously, lower facial height was increased. So, it can be concluded that the facial mask is effective in treating growing patients with a deficient maxilla.

• Journal of Internet of Things and Convergence
• /
• v.9 no.3
• /
• pp.13-19
• /
• 2023

In this paper, we investigated the implementation of a hairstyle recommendation system based on big data and deepfake technology. The proposed hairstyle recommendation system recognizes the facial shapes based on the user's photo (image). Facial shapes are classified into oval, round, and square shapes, and hairstyles that suit each facial shape are synthesized using deepfake technology and provided as videos. Hairstyles are recommended based on big data by applying the latest trends and styles that suit the facial shape. With the image segmentation map and the Motion Supervised Co-Part Segmentation algorithm, it is possible to synthesize elements between images belonging to the same category (such as hair, face, etc.). Next, the synthesized image with the hairstyle and a pre-defined video are applied to the Motion Representations for Articulated Animation algorithm to generate a video animation. The proposed system is expected to be used in various aspects of the beauty industry, including virtual fitting and other related areas. In future research, we plan to study the development of a smart mirror that recommends hairstyles and incorporates features such as Internet of Things (IoT) functionality.