• Journal of the Korea Concrete Institute
• /
• v.22 no.3
• /
• pp.367-374
• /
• 2010

The transfer slab system is a structural system that transfers the loads from the upper shear wall structure to the lower columns. This is a costly system due to a very thick slab, and the relatively high cost can be mitigated by introducing voids in the slab. However, this system of flat plate containing voids is vulnerable to brittle failure caused by punching shear in vicinity of slab-column connection. Thus, the punching shear capacity of the void system is very important. However, the current code doesn't provide a clear design provision for the strength of slabs with a void section. In this study, experimental study was conducted to investigate the punching shear strength of the void slab system. The shear strength of the specimens was predicted by current code and previous researches. In result, the punching shear strength of the void system is determined as the least value calculated at critical section located a distance d/2 from the face of the column and the center of the void section using the effective area at critical section.

• Journal of Korean Society of Steel Construction
• /
• v.25 no.5
• /
• pp.569-578
• /
• 2013

In a super-tall building construction, thick and large-sized embed plates are usually used to connect mega structural steel members to RC core wall or columns by welding a gusset plate on the face of the embed plate with T-shape. A large amount of heat input accumulated by weld passes causes the plates to expand or deform. In addition, the temperature of concrete around the plates also could be increased. Consequently, cracks and spalls occur on the concrete surface. In this study, the effect of weld heat on embed plates and 80MPa high strength concrete is investigated by considering weld position (2G and 3G position), edge distance, concrete curing time, etc. Measured temperature of the embed plates was compared with the transient thermal analysis results. Finally, push-out tests were performed to verify and compare the shear studs capacity of the embed plate with design requirement. Test result shows that the shear capacity of the plate is reduced by 14%-19% due to the weld heat effect and increased as the concrete curing time is longer.

• Tuberculosis and Respiratory Diseases
• /
• v.51 no.4
• /
• pp.379-385
• /
• 2001

Sternocostoclavicular hyperostosis is an uncommon disease, characterized by an inflammatory arthrosteitis of the sternocostoclavicular region. Clinically, it manifests as a painful swelling of the upper anterior chest wall, which is associated with occasional pustulosis palmaris and plantaris. A 48-year-old man had suffered from pain in both shoulders and the upper anterior part of the chest for 6 months. On examination, a venous engorgement in the neck with dilated collateral veins in the upper chest and shoulders was observed. Swelling was noticed in his face, neck and both arms. Radiologically, the clavicles, the sternum and the first ribs were enlarged with complete fusion between them. 99Tc scintigraphy showed increased uptake in the clavicles and the sternum. Selective venography resulted in a bilateral subclavian and brachiocephalic vein occlusion, which resulted from a subclavian vein thrombosis. All the above suggested a sternocostoclavicular hyperostosis. He underwent a vascular graft interposition between the right jugular vein and the left innomianate vein (using 8mm ringed Gore-Tex graft) and a resection of the bilateral medial half of clavicle and 1st rib. Here, we present a case on sternoclavicular hyperostosis with subclavian and brachiocephalic vein thrombosis, and report this case study with a review of the appropriate literature.

• Korean Security Journal
• /
• no.31
• /
• pp.125-155
• /
• 2012

Terrorist organization has shown the trend of secret organization and it is harder to cope with terrorism because of uncertainty of terrorism. Homegrown terrorism is the one, whose preparation, execution and effect are restricted to domestic area. By the way, in the worldwide economic depression, violence and radical demonstration have shown the expansion trends as in Middle East, political revolution of Africa, anti-social resistance of Europe and Wall Street Occupation of USA. Homegrown terrorism is occurring in various countries such as UK and Spain as well as USA. Specialists warn homegrown terrorism in Korea. The purpose of this study was to prospect the possibility of homegrown terrorism that can be generated in the transfer to multi-culture society as various foreigners come to Korea rapidly and suggest the method to cope with the trend. The study analyzed environment and analysis of homegrown terrorism that Korea faces now. The methods to cope with homegrown terrorism are as follows. First, distribution of radical homegrown terrorism via internet should be prevented. Second, the connection between terrorist organization and homegrown terrorist should be prevented. Third, there should be a cooperation among government, residents and religious group. Fourth, there should be an open approach against multi-culture society. Fifth, there should be a systematic control for cause of new conflict. Finally, there should be a long-term approach to cause of new conflict. If we do not make an effort to prevent homegrown terrorism, terrorism environment may face new aspect and national and social cost for it will increase.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.2 no.2
• /
• pp.50-61
• /
• 2000

The ground around the portal of a tunnel is the most typical part showing the 3-dimensional mechanical behavior in the tunnel. The portal slope is constructed at the weathered soft rock-mass, and remains as a potential sliding mass. The slope failure around the tunnel portal may happen drastically and induce the great disaster; hence, for the permanent stability several special techniques are required. To solve this problem, the ground around the tunnel portal may be excavated in the arch shape to develop the arching effect in horizontal direction. With the arch-type portal slope, one can reduce considerably the excavation mass and the damage of environments. This approach has not been attempted yet due to the lack of understanding and the well-defined analyzing method, so the retaining wall type portal is more universal. The 3-dimensional finite element analyses were carried out to prove that the arch type is more advantageous in safety and cost than the right angle type. The influence of the tunnel construction sequence and the strength of the rock-mass on the slope stability was investigated by focusing on the maximum shear strain in the slope, and the yield zone at the tunnel face.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.11 no.2
• /
• pp.29-39
• /
• 1989

Ossifying fibroma is a relatively slow growing tumor, and likely to have presented for some years before its clinical diognosis. The usually well circumscribed nature of ossifying fibroma in jaws lends itself to relative ease of excision and hence the favorable therapeutic results. On occasion, however, particulary in juvenile patient, if maxilla the tumor assumes an aggressive behavior. In that case, because the tumor grows invasively, resection with a margin of healthy tissue is indicated. The case presented is 34 - year old female. The patient had noticed a gradual swelling of the right side of the face approximately 2 months in duration correlation with a intermittent pain on the right maxillary molar area. Palpation disclosed firm swelling on the right anterior and lateral walls of the maxillary sinus extended to the maxillary tuberosity area. The radiographic examination revealed soft tissue mass with multiple dense round calcifications with destruction of anterior and posterolateral wall of the right maxillary sinus and right alveolar process, and hard palate. The mass totally obliterated maxillary sinus and extended to the pterygopalatine fossa. The histologic diagnosis from the biopsied specimen revealed ossifying fibroma. The tumor mass was resected by subtotal maxillectomy procedure due to a recent rapid infiltrative growth. In 5 months of postoperative follow - up period, the patient has favorable prognosis.

• Korean Journal of Heritage: History & Science
• /
• v.52 no.4
• /
• pp.206-225
• /
• 2019

This paper examines the trade and development aspects of glass mirrors through the literature records of the Joseon Dynasty, and studies the characteristics of existing glass mirror crafts by referring to the terms and types shown in the literature. The glass mirror in the records had called western mirrors(西洋鏡, 洋鏡), glass mirrors(玻璃鏡, 玻瓈鏡), stone mirrors(石鏡), etc. Glass mirrors were imported mainly through trade with Russia and the Qing Dynasty since the 17th century and were banned from importation in the late Joseon Dynasty. These mirrors were something new that caused a great stirring in Joseon society in the 18th century, and in the 19th century, it grew larger as a commodity needed for everyday life, especially with trade with Japan. At that time, glass mirrors were used for various purposes, such as installing large glass at a store, which were not the standard mirror usage of confirming one's appearance. These mirrors surprised Koreans in Joseon who experienced them at Yanjing Liulichang(燕京 琉璃廠) in the 18th and 19th centuries. As a result, the demand for glass mirrors rapidly increased and quickly surpassed that of bronze mirrors. Consequentially, new crafts using glass mirrors instead of bronze mirrors in Joseon began to be produced and used after the 18th century. In particular, integrated flat boards of glass mirrors were developed as crafts used indoors. It was convenient to use the hair comb box, a long-time presence in Joseon society, with the bronze mirror. This kind of mirror remained apparent in various genre paintings, including the Taepyeong Seongsido(太平城市圖, 'A Thriving City in a Peaceful Era') collected the National Museum of Korea which reflect its populism of the times. Also, the Mirror Stand(鏡臺) used in the Qing Period was produced in Joseon, but there was a difference in the way of making the drawers and box shapes between two nations. On the other hand, the Face Mirror(面鏡) was made to look at the face. Various crafts made with the aesthetic sense of Joseon, such as the ox horn inlaying craft technique, were produced with auspicious designs. In the 19th century, glass mirrors were imported from European countries, such as France, Denmark, the Netherlands, and the United Kingdom, however after the end of the 19th century Japanese crafts were popular. Glass mirrors, which were popular in the Meiji and Taisho eras of Japan, were imported and also the Mirror Screen(鏡屛) using large glass mirrors were used. In particular, the mirror screen had developed wood furniture since the previous time, which were used for banquets and large spaces, such as the drawing room, and were imported from China and Japan. In addition, the western architectural effect of attaching a mirror to the wall was also attempted to adjust the brightness of the space and introduce another image and scenery in the mirror. This was done at Deoksugung Palace's Seokjojeon.

• Composites Research
• /
• v.31 no.2
• /
• pp.43-50
• /
• 2018

The effects of deposition temperature on chemical vapor deposited silicon carbide (CVD-SiC) were studied to obtain high deposition rates and excellent bending strength characteristics. Silicon carbide prepared at $1250{\sim}1400^{\circ}C$ using methyltrichlorosilane(MTS : $CH_3SiCl_3$) by hot-wall CVD showed deposition rates of $95.7{\sim}117.2{\mu}m/hr$. The rate-limiting reaction showed the surface reaction at less than $1300^{\circ}C$, and the mass transfer dominant region at higher temperature. The activation energies calculated by Arrhenius plot were 11.26 kcal/mole and 4.47 kcal/mole, respectively. The surface morphology by the deposition temperature changed from $1250^{\circ}C$ pebble to $1300^{\circ}C$ facet structure and multi-facet structure at above $1350^{\circ}C$. The cross sectional microstructures were columnar at below $1300^{\circ}C$ and isometric at above $1350^{\circ}C$. The crystal phases were all identified as ${\beta}$-SiC, but (220) peak was observed from $1300^{\circ}C$ or higher at $1250^{\circ}C$ (111) and completely changed to (220) at $1400^{\circ}C$. The bending strength showed the maximum value at $1350^{\circ}C$ as densification increased at high temperatures and the microstructure changed from columnar to isometric. On the other hand, at $1400^{\circ}C$, the increasing of grain size and the direction of crystal growth were completely changed from (111) to (220), which is the closest packing face, so the bending strength value seems to have decreased.

• Journal of the Korean Society of Costume
• /
• v.41
• /
• pp.95-105
• /
• 1998

SOO-BAL(Hair Style) is a method Which match hair style to face and clothes with using hair covering and protecting the head. Also SOO-BAL includes personal ornaments using to avoid one's hair be disheveled. In a standpoint of beauty and spirit, etiquette SOO-BAL is a very important thing as one being dressed up. Until now, since just a form of hair style have been studied, hair styling process is nothing to be known and studied. Time after time, our unique traditional SOO-BAL is forgotten with clothes and then this th-esis will be classified hair styling form follow-ing a form of hair style in royal palace of the C-hosun dynasty. According to the record of HAE DONG HISTORY, it shows the same of attire between Ko-rean and chinese style in ae of the chosun. The reason in that there were no any certain boundary border and the interaction of culture between two countries was happened spontaneously at ancient time like the GOCHO-SUN age. Until the period of the three states, the korean attire be changed had gone with chinese one s-imilarly. The chinese form gave to influence on the EONJIN MEURI·POON-GI-MYEONG MEURI·JJO-CJIN MEURI·MOOK-EUN GOONG-BAL MEURI·OL-LIN MEURI·SSANGSANG-TU ME-URI be drawn wall painting in the KOKUR-YU. And a gold chignon accesso-ry unearthed in a MOO-RYOUNG royal mausoleum is proof of the korean attrire be changed with chinese. In the shilla dynasty at three years after Cjin-Deuk(A.D. 649) reign. It was recorded that the dynasty let women wear the form of chinese attire. Also in the koryo dyn-asty, a rod-like hairpin (BIN-YEU) and DANG-GI employing EON-JIN MEURI was used. The SOO-BAL based on the Confucianism had lots of regulations which limited to use ornaments with classes of society in the CHOSUN dynasty. Until YOUNG CHO and CHUNG CHO period. EONJIN MEURI be decorated GACHAE was announced by dynasty as ind-ulging in luxury. Women of yangban used a rod-like hairpin and a chignon accessory made by jewerly. And 1-owly women weared a rod-like hairpin made of born and wood to perfom EONJIN MEURI with PUNCHAE. Most unmarried women decorated with DDA-AH-NEULIN MEURI, GUI-MIT MEURI, specially in palace with SAE-ANG MEURI. At palace, one put on a full dress with KEUN MEURI, and a simple dress with ER-YEO MEURI be decorated DDERL-JAM The CHOP-JI MEURI manifested social rank, class. Kids at CHO-SUN age had BA-DUK-PANMEURI and JONG-JONG MEURI. The ornament things are GACHE, DDERL JAM with EON-JIN M-EURI, and all kinds of rod-like hairpin and chignon accessory used in JJOK MEURI. IN DANGGE, JE-BI-BURI DANGGI used by ummarried women. DO-TOO-RAK DANGGI and AP DANGGI on a dress suit, and BE-SSI DANGGI used by 3∼4 years ungrown kids etc. were used. And at palace, kinds of CHUPJI used with JJOK MEURI showed social rank. In CHOSUN age, women want to keep shiny hair washed at TA-NO festival day, a treatment of bald hair used a forked remedy. In CHOSUN age, woman Soo-Bal hair style has DAE-SOO·DDEU-KOO-JI MEURI·CHO-P-GI MEURI·EON-JIN MEURI·SAE-ANG MEURI· and so on. We could find out Soo-Bal was developed very well by these variety hair styles. I attatched all of the hair style pictures step by step, and also explained detail my research foll owing these pictures.

• Proceedings of the Korean Environmental Sciences Society Conference
• /
• 1998.10a
• /
• pp.2-4
• /
• 1998

Proliferation of Nocardia amarae cells in activated sludge has often been associated with the generation of nuisance foams. Despite intense research activities in recent years to examine the causes and control of Nocardia foaming in activated sludge, the foaming continued to persist throughout the activated sludge treatment plants in United States. In addition to causing various operational problems to treatment processes, the presence of Nocardia may have secondary effects on the fate of heavy metals that are not well known. For example, for treatment plants facing more stringent metal removal requirements, potential metal removal by Nocardia cells in foaming activated sludge would be a welcome secondary effect. In contrast, with new viosolid disposal regulations in place (Code o( Federal Regulation No. 503), higher concentration of metals in biosolids from foaming activated sludge could create management problems. The goal of this research was to investigate the metal sorption property of Nocardia amarae cells grown in batch reactors and in chemostat reactors. Specific surface area and metal sorption characteristics of N. amarae cells harvested at various growth stages were compared. Three metals examined in this study were copper, cadmium and nickel. Nocardia amarae strain (SRWTP isolate) used in this study was obtained from the University of California at Berkeley. The pure culture was grown in 4L batch reactor containing mineral salt medium with sodium acetate as the sole carbon source. In order to quantify the sorption of heavy metal ions to N amarae cell surfaces, cells from the batch reactor were harvested, washed, and suspended in 30mL centrifuge tubes. Metal sorption studies were conducted at pH 7.0 and ionlc strength of 10-2M. The sorption Isotherm showed that the cells harvested from the stationary and endogenous growth phase exhibited significantly higher metal sorption capacity than the cells from the exponential phase. The sequence of preferential uptake of metals by N. amarae cells was Cu>Cd>Ni. The specific surFace area of Nocardia cells was determined by a dye adsorption method. N.amarae cells growing at ewponential phase had significantly less specific surface area than that of stationary phase, indicating that the lower metal sorption capacity of Nocardia cells growing at exponential phase may be due to the lower specific surface area. The growth conditions of Nocardia cells in continuous culture affect their cell surface properties, thereby governing the adsorption capacity of heavy metal. The comparison of dye sorption isotherms for Nocardia cells growing at various growth rates revealed that the cell surface area increased with increasing sludge age, indicating that the cell surface area is highly dependent on the steady-state growth rate. The highest specific surface area of 199m21g was obtained from N.amarae cell harvested at 0.33 day-1 of growth rate. This result suggests that growth condition not only alters the structure of Nocardia cell wall but also affects the surface area, thus yielding more binding sites of metal removal. After reaching the steady-state condition at dilution rate, metal adsorption isotherms were used to determine the equilibrium distributions of metals between aqueous and Nocardia cell surfaces. The metal sorption capacity of Nocardia biomass harvested from 0.33 day-1 of growth rate was significantly higher than that of cells harvested from 0.5- and 1-day-1 operation, indicatng that N.amarae cells with a lower growth rate have higher sorpion capacity. This result was in close agreement with the trend observed from the batch study. To evaluate the effect of Nocardia cells on the metal binding capacity of activated sludge, specific surface area and metal sorption capacity of the mixture of Nocardia pure cultures and activated sludge biomass were determined by a series of batch experiments. The higher levels of Nocardia cells in the Nocardia-activated sludge samples resulted in the higher specific surface area, explaining the higher metal sorption sites by the mixed luquor samples containing greater amounts on Nocardia cells. The effect of Nocardia cells on the metal sorption capacity of activated sludge was evaluated by spiking an activated sludge sample with various amounts of pre culture Nocardia cells. The results of the Langmuir isotherm model fitted to the metal sorption by various mixtures of Nocardia and activated sludge indicated that the mixture containing higher Nocardia levels had higher metal adsorption capacity than the mixture containing lower Nocardia levels. At Nocardia levels above 100mg/g VSS, the metal sorption capacity of activate sludge increased proportionally with the amount of Noeardia cells present in the mixed liquor, indicating that the presence of Nocardia may increase the viosorption capacity of activated sludge.