• Journal of the Korean Geotechnical Society
• /
• v.19 no.6
• /
• pp.39-47
• /
• 2003

Rockbursts are mainly caused by a sudden release or the stored strain energy in the rock mass. They have been the major hazard in deep hard rock mines but rarely occur in tunnels. Due to the short history and limited information on rockbursts, the topic has rarely been studied in Korea. Some cases of rockbursts, however, have been reported during construction of a mountain tunnel for waterway. This study focuses on analyzing data on rockbursts obtained from a TBM (Tunnel Boring Machine) tunnel and suggests methods for a comprehensive understanding on rockbursts. From the analysis of the field data of rockbursts, it was found that most rockbursts mainly occurred at the section between the tunnel face and the TBM operating room, and the rock bursting phenomena lasted up to 20 days after excavation in certain areas. The data also show that the bursting spots are located all around the tunnel surface including the face, the wall, and the roof, The maximum size of bursting spots is usually less than 100cm. This study also suggests new scale systems of brittleness and uniaxial compressive strength to evaluate the possible tendency for a rockburst. These systems are scaled based on the scale system of strain energy density. In addition, with these scale systems, this research shows that there are potentially higher tendencies for rockbursts in this specific tunnel. Moreover this research suggests that properties of rock and rock mass, RMR (Rock Mass Rating) value, tunneling method, excavating speed, and depth of tunnel have a strong correlation with rockbursts.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.10 no.3
• /
• pp.245-256
• /
• 2008

The steel rib, one of the main support of tunnel, plays a very important role to stabilize tunnel excavation surface until shotcrete or rockbolt starts to perform a supporting function. In general, a steel rib at the horizontal funnel is being installed in the direction of gravity which is known favorable in terms of constructability and stability. However, as the direction of principal stress at the inclined tunnel wall is different from that of gravity, the optimum direction of steel rib could be different from that at the horizontal tunnel. In this study, a numerical method was used to analyze the direction of force that would develope displacement at the inclined tunnel surface, and that direction could be the optimum direction of steel rib. The support efficiency of steel rib could be maximized when the steel rib was installed to resist the displacement of the tunnel. Three directions which were recommended for the inclined tunnels in the Korea Tunnel Design Standard were used for the numerical models of steel rib direction. In conclusion, the results show that all displacement angle of the models are almost perpendicular to the tunnel surface regardless of face angle. So if the steel rib would be installed perpendicular to the inclined tunnel surface, the support efficiency of steel rib could be maximized.

• Journal of Korean Academy of Nursing
• /
• v.42 no.1
• /
• pp.36-47
• /
• 2012

Purpose: This study was to explore adaptation experience to family among women who immigrated for marriage. Specific aims were to identify problems immigrant women face as family members and how they interact with other family members. Methods: Grounded theory methodology was utilized. Data were collected from iterative fieldwork with individual in-depth interviews from 6 immigrant women as key informants, and 2 of their husbands and 2 of their mothers-in-law as general informants. Results: Through constant comparative analysis, a core category emerged as "tearing down the wall in communicating". Causal conditions were feeling frustrated in one's expectations, differences in language and life style, differences in recognition, and perceptions of discrimination and prejudice. Strategies were learning the Korean language, learning Korean culture, managing stress, mediating differences between family members, and introspecting. Intervening factors were support systems, burdens of child-rearing, and the condition of one's health. Consequences were rooting oneself in one's family and accepting one's life as it is. Conclusion: Results of the study indicate that there is a need for nurses to understand differences in communication with family members among immigrant women and to provide information and emotional support to improve the adaptation of these women to their Korean families.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.32 no.10
• /
• pp.102-111
• /
• 2004

The procedure of design and manufacture of sub-scale combustor using bipropellant swirl injector with external mixing for a liquid rocket engine are described. The results of cold flow test, ignition test and combustion test of the sub-scale combustor are also given in this paper. The sub-scale combustor uses liquid oxygen(LOx) and kerosene as propellants and has a injector head, an ablative material combustor wall and a water cooled nozzle. The injector head has LOx manifold, fuel manifold, fire face plate, one center swirl injector and 18 main swirl injectors. The cold flow, ignition and combustion tests were successfully performed without damage of combustor. Results of hot firing tests show that combustion efficiency meets the target of design and operations of start and stop cyclogram are stable and high frequency combustion instability does not occur.

• Journal of Ocean Engineering and Technology
• /
• v.22 no.5
• /
• pp.52-60
• /
• 2008

This study investigates the applicability of CADMAS-SURF (Super Roller Flume for Computer Aided Design of a MArtime Structure) code basal on the Navier-Stokes solver to predict bore phenomena. The time variation of ware levels and velocities due to the bore propagation were computed for the different bore strength conditions. In order to verify the numerical results by CADMAS-SURF, laboratory experiments were also performed, using the DPIV and LDV measuring system. The numerical results were compared to the experimental data and the analytical predictions by the NSC method basal on fully nonlinear shallow-water theory by the method of characteristics. It appears that the CADMAS-SURF slightly overestimated the water-surface level measured by the laboratory experiments and its discrepancy becomes prominent as the bore strength increases. The predicted propagation speed for a bore was also slaver than that by the experiment and NSC method. However, the temporal variations in velocities were in relatively good agreement with the experimental data for all cases, except for overshooting and undershooting in the front face of a bore, which may be derived from the numerical instability. Further, CADMAS-SURF successfully simulated the decrease in the water level and velocity caused by the effects of negative waves reflected from the upstream end wall.

• Archives of Craniofacial Surgery
• /
• v.11 no.1
• /
• pp.13-18
• /
• 2010

Purpose: Nasal defect can be caused by excision of tumor, trauma, inflammation from foreign body reaction. Nose is located in the middle of face and protruded, reconstruction should be done in harmony with size, shape, color, and textures. We report various methods of nasal reconstruction using local flaps. Methods: From March 1998 to July 2008, 36 patients were operated to reconstruct the nasal defects. Causes of the nasal defects were tumor (18 cases), trauma (11 cases), inflammation from foreign body reaction (5 cases) and congenital malformation (2 cases). The sites of the defects were ala (22 cases), nasal tip (8 cases) and dorsum (6 cases). The thickness of the defects was skin only (5 cases), dermis and cartilagenous layer (7 cases) and full-thickness (24 cases). According to the sites and thickness of the defects, various local flaps were used. Most of alar defects were covered by nasolabial flaps or bilobed flaps and the majority of dorsal and tip defects were covered by paramedian forehead flaps. Small defects below $0.25 cm^2$ were covered with composite graft or full-thickness skin graft. Results: The follow-up period was 14 months. Partial flap necrosis was observed in a case, and one case of infection was reported, it was improved by wound revision and antibiotics. Nasal reconstruction with various local flaps could provide satisfactory results in terms of color and texture match. Conclusion: The important factors of nasal reconstruction are the shape of reconstructed nose, color, and texture. Nasolabial flap is appropriate method for alar or columellar reconstruction and nasolabial island flap is suitable for tip defect. The defect located lateral wall could be reconstructed with bilobed flap for natural color and texture. Skin graft should be considered when the defect could not afford to be covered by adjacent local flap. And entire nasal defect or large defect could be reconstructed by paramedian forehead flap.

• Journal of Veterinary Clinics
• /
• v.20 no.2
• /
• pp.233-236
• /
• 2003

A 10 year old, intact female Yorkshire terrier was referred to the Veterinary Teaching Hospital of Konkuk University. Upon admission, the patient had severe necrotic skin disease on face and abdominal wall, and also showed polyuria, polydipsia (PUPD), and polyphagia. A tentatative diagnosis of hyperadrenocorticism was made on the basis of history takings, physical examination, and results of CBC and serum biochemistry. Hyperadrencorticism was confirmed by ACTH stimulation test and pituitary-dependent hyperadrenocorticism (PDH) was diagnosed according to the results of high dose dexamethasone suppression test (HDDST). After initiating mitotane therapy, severe skin problem and clinical signs including PUPD were improved. And we determined whether or not mitotane therapy well controlled serum cortisol level with ACTH stimulation test. This case was presented to show that the patient misdiagnosed and treated for more than 1 year as other dermatologic problem in 3 local animal clinics was treated and managed sucessfully with mitotane administration.

• 한국지구물리탐사학회:학술대회논문집
• /
• 2004.08a
• /
• pp.180-189
• /
• 2004

The name of (Ban)wolseong thanks to its having a shape like a half-moon. Wolseong fortress is one of 'Gyeongju Historic Area', world heritage. The Silla kingdom's royal palace previously maintained its capital fortress at the locale of Wolseong. However its real face has been kept in mystery. This study grafts Geophysics on modern Archaeology and approaches with scientific and systematic methods to an excavation plan or archaeological study by means of GPR exploration which can complement archaeological curiosity without destroying Wolseong fortress. The exploration area is $12,000m^2$ in front of Seokbinggo(stone storage for ice). It is only $10\%$ area of Wolseong fortress. As a conclusion, GPR detected 7 of squared buildings($8{\times}8m^2$ size), stone wall, an entrance for the fortress, lots of foundation stones, road(presumptive), and a presumptive pond which size is 35${\~}$40m in diameter.

• Journal of Wetlands Research
• /
• v.22 no.3
• /
• pp.217-224
• /
• 2020

Waterlogging and unintended lake formation become the main problem in some parts of the world. Starting from 1989, the waterlogging problem was observed in the farmland of the Jarso community of Konso Woreda adjacent to the Segen River in Ethiopia. Therefore, the objectives are determining the extent and causes of unintended lake formation using GIS/RS in addition to a preliminary field survey to mitigate the problem. The analysis of satellite images revealed that over the years invasion of the irrigable land by unwanted water had increased, as, in 1989, the size of the wetland area was about 8 Km²; in 2000 the size of the un-intended lake was only 8.23 ㎢. Alarmingly the size of the lake increased to 19.68 Km² in 2014. Silting up of Weir and changing the flow of River Segen and Human Intervention and changing the natural flow of River Yanda were the main causes of this unwanted prolonged water-logging. The ecological and social environment has been degrading as the people of the waterlogged area have been experiencing some settlement and losing their land. Another problem encountered was flooding from River Barka and invasion of the farmland. Sediment control best management practices (BMPs) i.e, Removal of sediment, providing sandbags and well-scheduled maintenance; Changing the junction point of Yanda and Segen River were suggested for the long-term and short term possible remedial measures. Gabion retaining wall on the bank of the Segen River to the face of Barka River was suggested to protect the farmland from flooding.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.12 no.6
• /
• pp.989-996
• /
• 2017

The proposed directional pencil beam antenna consists of a waveguide feeder with bended elliptical conductor plate feed and a parabolic curved reflector. Two rectangular apertures located at the broad wall near the end of the feed waveguide inserted from behind the reflector are located at the focus of the reflector and emit electromagnetic energy with bended elliptical conductor plate. This plate is designed to reflect electromagnetic energy primarily and to face the main reflector. The two rectangular apertures located at the waveguide end have inwardly protruding tabs for impedance matching of the antenna system, the shape of the tabs is a truncated oval. The proposed parabolic reflector antenna has a diameter of 400 mm and a focal length of 134.23 mm. The antenna gain is 33.68 dBi at the center frequency of 16.5 GHz, the beam width is $3.3^{\circ}$ and the reflection loss is -15 dB. Using the HFSS-IE, simulation results are performed to validate the proposed antennas.