• 한국공작기계학회논문집
• /
• 제11권2호
• /
• pp.1-8
• /
• 2002

Cutting force is obtained as a sum of chip removing force and ploughing force. Chip removing force is estimated by multiplying specific cutting pressure by cutting area. Since ploughing force is caused from dullness of a tool, its magnitude is constant if depth of cut is bigger than a certain value. Using the linearity of chip removing force to cutting area and the constancy of ploughing force regardless of depth of cut which is over a certain limit each force is separated from measured cutting force and used to establish cutting force model. New rotation matrix to convert the measured cutting force in reference axes into the forces in cutter axes is obtained by considering that tool angles are projected angles from cutter axes to reference axes.. Spindle tilt is also considered far the model. The predicted cutting force estimated from the model is in good agreement with the measured force.

• 한국정밀공학회지
• /
• 제13권11호
• /
• pp.100-105
• /
• 1996

In this paper presents a new technique (stain-telemetering) for detection of coated tool failure in face milling processes. In the cutter body, the strain signals received from the transmitter are transformed into frequency modulation(FM) signals in face milling processes. The receive which is placed near by the Vertical milling machine receives the FM signals, then the signals are sent to a computer, which shows the tool failure. In this paper, A on-line monitoring of the tool failure detection system based on the strain-telemetering apparatus has been represented.

• 한국공작기계학회논문집
• /
• 제17권5호
• /
• pp.116-122
• /
• 2008

In order to establish automation or optimization of the machining process, predictions of the forces in machining are often needed. A new model fur farces in milling with the experimental model based on the specific cutting pressure and the Oxley's predictive machining theory has been developed and is presented in this paper. The specific cutting pressure is calculated according to the definition of the 3 dimensional cutting forces suggested by Oxley and some preliminary milling experiments. Using the model, the average cutting forces and force variation against cutter rotation in milling can be predicted. Milling experimental tests are conducted to verify the model and the predictive results agree well with the experimental results.

• 한국생산제조학회지
• /
• 제9권2호
• /
• pp.72-79
• /
• 2000

A new optimal tool design model which can be minimized the resultant cutting forces under the constrains of variables was developed. The resultant cutting forces are used as the objective function and tool angles are used as the variables. Cutting experiments of tool wear and chip length using the new and conventional tools wee carried out. Tool life of optimized cutter are more increased than those of conventional cutter by 2.29 times and 2.52 times at light and at heavy cutting conditions respectively. Chip length of optimized cutter are more increased than those of conventional cutter It is considered that the decrease of the resultant cutting forces is the cause that an effective rake and shear angles by the shape of optimal cutter.

• 한국정밀공학회지
• /
• 제8권1호
• /
• pp.116-129
• /
• 1991

A cutting force model for face milling operation using 3-directional specific cutting force coefficients is developed. The model is taken into consideration factors such as cutter geometry, machining conditions, spindle eccentricity, insert initial postion errors, etc. The simulated force in X, Y, Z directions from the model are subsequently compared with measured forces in the time and frequency domains. The simulated forces have a good agreement with measured forces.

• 한국정밀공학회지
• /
• 제10권3호
• /
• pp.161-167
• /
• 1993

This paper deals with a new method for the machining of a die cavity defined by sculptured surfaces. In machining die cavities or pockets, process planners have been faced with some troulbes. One of the troubles ius to rebove a great deal of material within a given boundary while avoiding cutter interference. Cutter interference is a ciritical problem in NC machining of a die cavity. Even though this cavity machining has been implemented in many CAM systems, most of them can handle limited shapes of cavities or pockets. In this paper, a procedure has been developed to machine die cavity or pocket of a sculptured surface. The offset surfaces of the part surfaces and boundary surfaces are determined to calculate the intersection curves. These intersection curves form a FACE on the part surface, and the interference free tool pathe is generated by eliminating the points outside the FACE when computing the cutter contact (CC) data. Additionally, the cutter location (CL) data obtained from the CC data convert to an NC data. The NC data generated through this algorithm are verified on the CINCINNATI milling machine. A propotype die cavity machining system has been implemented in FORTRAN language and FIGARO graphics library on IRIS workstation.

• 한국정밀공학회지
• /
• 제10권2호
• /
• pp.76-85
• /
• 1993

Based on the cutting force model, three-dimensional optimal design model was developed and optimal designed tool which is minimized cutting force is developed by computer simulation technique. In this model the objective function which is minimized resultant cutting force was used and the variables are radial rake angle, axial rake angle, lead angle of the tool. The cutting forces using conventional and optimal tools by simulation, are compared and analyzed in time and frequency domains. In time domain the cutting force of optimal tool in feed direction was more reduced and less fluctuated than that of conventional tool. Cutting forces of optimal tool in X-and Z-directions are shown a little increased than those of conventional tool. In frequency domain amplitude of insert frequency components of optimal tool in feed direction was more reduced than that of convent- ional tool. The amplitudes of insert frequency components of optimal tool in X-and Z-direction are a little increased than those of conventional tool. As the reduction of amplitude and fluctuations of the cutting force, Optimal tool is considered that tool life and surface roughness would be improved, and stable cutting would be expected.

• 대한기계학회논문집A
• /
• 제25권6호
• /
• pp.972-979
• /
• 2001

Tool fracture index(TFI) was developed in order not only to detect tool fracture but also to predict the amount of tool fracture in face milling. TFI is calculated by using peak-to-valley values of cutting force acting on teeth and their ratio between the adjacent teeth. When the tool fractures, a large value of TFI proportional to the amount of tool fracture was obtained periodically and decreased gradually. It was found that TFI is independent of cutter runout and it almost does not vary during transient cutting such as cutting condition change during machining. The threshold of tool fracture can be analytically determined by TFI developed in this paper, because the magnitude of TFI was shown to be dependent on the ratio of the amount of tool fracture to feed per tooth and immersion ratio. It was possible to predict the amount of tool fracture in experiments by using the proposed TFI.

• 한국산학기술학회논문지
• /
• 제10권6호
• /
• pp.1157-1163
• /
• 2009

CNC 공작기계들을 이용한 품질향상과 생산성 향상을 위하여 2,3축 CNC 공작기계들에 부가축(2축)을 추가하여 생산 공정개선을 위해 노력하고 있다. 일반적인 CNC 공작기계들의 가공공정보다는 가공물의 공정간 이동이 현저히 줄어들기 때문에 생산성 향상과 더불어 정밀도 유지가 향상되기 때문이다. 그런데 기계가공 현장에서는 일반적으로 CAD(2.5D)와 CNC 공작기계의 수동프로그램 작업에 익숙한 작업들이 많다. 따라서 부가축을 추가한 CNC 공작 기계들의 원활한 활용을 위해 CAD/CAM의 VBScript을 활용하여 다축, 다공정 가공프로그램을 편리하게 작성할 수 있도록 한 것이다. VBScript을 컴파일하여 CAD/CAM Software(2.5D)에서 밀링용 Face Cutter의 Insert Tip 자리를 대상으로 수행한 결과 수동 프로그램 작성 시간 단축은 물론 복잡한 Multi CAD/CAM Software보다는 접근성이 편리하며, 다양한 제품들을 빠르게 프로그램 할 수 있었다.

• 한국기계가공학회지
• /
• 제17권6호
• /
• pp.61-67
• /
• 2018

The face milling cutter, which is mainly used for the face milling, is used to cut the Carbon steel(SM20C) in the machining center for 5 times and 10 times respectively. This study clarify the dimensional accuracy characteristics according to the number of fine machining varied the condition of cutting depth, table feed speed and spindle speed. Cutting depth is varied 0.05~0.2mm, table feed speed is varied 0.05~0.2mm/min and spindle speed is varied 1500~2500rpm. As a result, the dimensional accuracy was stable 6 times machining with table feed speed 150mm/min and 10 times machining with table speed 100mm/min and cutting depth 0.05mm regardless times of machining.