• Journal of the Korean Data and Information Science Society
• /
• 제23권6호
• /
• pp.1127-1135
• /
• 2012

연관성 규칙 기법은 대용량데이터베이스에 있는 항목들 간의 관련성을 수치화 하는 것으로 데이터 마이닝 기법 중에서는 가장 많이 활용되고 있다. 연관성 규칙을 탐사하기 위한 연관성 규칙 평가 기준에는 지지도, 신뢰도, 향상도 등이 있다. 이들 중에서 가장 중심이 되는 신뢰도는 비대칭적 측도일 뿐만 아니라 항상 양의 값만을 취하고 있어서 항목 간에 연관성 규칙을 생성하는 데 여러가지 문제가 존재한다. 이러한 문제를 해결하기 위해 본 논문에서는 확률적 흥미도 측도 기반, 특히 주변 비율을 고려하지 않은 유사성 측도를 연관성 평가 기준으로 적용하는 방안에 대해 연구하였다. 예제에 의한 비교를 통하여 Yule과 Michael의 유사성 계수와 Pearson의 파이 계수는 신뢰도와 동일하게 연관성의 정도를 파악할 수 있는 동시에 부호를 포함하고 있어서 연관성의 방향도 알 수 있었으나, 카이 제곱 통계량 기반 측도들은 항상 양의 값만 나타날 뿐만 아니라 신뢰도와는 변화하는 양상이 다르다는 것을 확인할 수 있었다.

• Archives of Plastic Surgery
• /
• 제34권2호
• /
• pp.250-257
• /
• 2007

Purpose: Aging changes of midface include drooping of lower lid, wrinkles of malar area, orbitomalar groove and deepening of nasolabial fold from drooping of malar fat pad. Improvement of lower lid can be achieved through lower blepharoplasty, but improvement of cheek can not be gained. Superficial subciliary cheek lift(by Moelleken, 1996) is a method that lifts malar fat pad through extended subciliary incision. We obtained simultaneous improvement of lower lid, malar wrinkles and orbitomalar groove with modification of this technique. Methods: From December 2003 to January 2006, we performed this method on 21 patients among volunteers for lower blepharoplasty who wanted to correct orbitomalar groove and malar wrinkles. Under local anesthesia, lateral extension of subciliary incision is done 1cm from the lateral orbital rim. Skin-muscle flap is elevated, and dealing of orbital fat and septum is the same as with ordinary lower blepharoplasty. After downward subcutaneous dissection through extended incision, exposing the upper 1/3 level of malar fat pad, superolateral fixation is done to superior deep temporal fascia. Excision of the upper part of fat pad is performed, if needed. After excision of overlapped skin-muscle flap, skin closure is done. Results: We obtained satisfactory results with this simple method for improvement of orbitomalar groove and malar wrinkles among patients for lower blepharoplasty. During a follow-up period of 5 months on the average, no revision was performed. Conclusion: Under local anesthesia, lower blepharoplasty and improvement of orbitomalar groove and malar wrinkles can be achieved at the same time. It is good for patients who do not want conventional midface-lifting. But surgeons should select patients and perform cautiously for it may leave a scar of the extended incision that require over 2 months for maturation and it is insufficient for improvement of nasolabial fold compared to conventional mid face-lifts.

• 복식
• /
• 제56권6호
• /
• pp.33-44
• /
• 2006

With the basis of objective truth by the subjective sensibility and the Rock art's history and the molding the Rock arts image motive, the conclusion like this; The first, Rock art express the imagination variety as symbols of abundance, fecundity, stable lift's present mourning and absolute respect and the spirit. The second, the new motives are developed by making formative images with deeply understanding essential side in the Rock arts. With this, the pattern is repeated with making motive's repeat units and the new pattern is developed by 45-angle iteration. These cultural products were used to produce necktie, scarf, and clothing making commonly efficient use in actual life- with 3D simulation. Through developing Rock art pattern, it is great the possibility of development for expressing Korea images with making an excavation. A competitive design as to the international period can be developed with applying to the variety department-cultural products development.

• 소성∙가공
• /
• 제14권1호
• /
• pp.57-64
• /
• 2005

This study deals with the cold forging process design for shaft in the main part of automobile motors with rectangular deep groove. In forging process, the accuracy and die lift is very important because it have influence on reduction of the production cost and the increase of the production rate. Therefore, it is necessary to develop the manufacturing process of shaft by cold forging., process variables are the cropped face angle of billet and the eccentric load of punch. The former is derived from cropping test, the latter is occurred by clearance between container and preform. Also, grooved preform select the process variable for decrease in punch deflection. We investigate that a deflection of punch and a deformation of preform to every process variables. Through this investigation, we suggest the optimal preform and process design, expect to be improved the tool life in forging process.

• 한국농업기계학회:학술대회논문집
• /
• 한국농업기계학회 1996년도 International Conference on Agricultural Machinery Engineering Proceedings
• /
• pp.369-378
• /
• 1996

A Lugged steel wheel was operated with two kinds of travel reduction on a sandy clay. " Small -sized transucers of the three-surfaced lug type " were installed to the wheel for the measurement of normal and tangential forces acting on a trailing lug side, lug face and a leading lug side separately . The external results acting on each surface were calculated from those measured forces. This results proved qualitatively that the relationships between external forces and lug surfaces obtained from mathematical analyses were external forces and lug surfaces obtained from mathematical analyses were correct. The traction, the motion resistance and the dynamic load were changing at the three lug surface under various operating conditions . Therefore, total analyses of three surface were indispensable to discuss the performance of the wheel lug.

• Archives of Plastic Surgery
• /
• 제33권1호
• /
• pp.127-130
• /
• 2006

The incidence of the tuberculosis infection has decreased worldwide, but it is still easy to find the patients in some areas or some races. And it is very difficult to diagnose and treat the patients who are infected by the atypical tuberculosis. Facial skin infection by atypical tuberculosis has not been reported. We report the case of a 62-year-old woman who developed facial skin and soft tissue necrosis caused by Mycobacterium abscessus after receiving liquid silicone injections and face lift operation. We cultured the pathogenic organism and treated the wound with radical curettage, debridement, skin graft and tuberculosis medication.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2001년도 춘계학술대회 논문집
• /
• pp.123-128
• /
• 2001

Numerical simulation is conducted to clarify the heat transfer and fluid flow characteristics of brake shoe for freight car. High order up-wind scheme for governing equations, k-epsilon turbulent model and SIMPLEC algorithm based on finite volume method are used to solve the physical shoe model. The governing equations are solved by TDMA(Tri-Diagonal Matrix Algorithm) with line-by-line method and block correction. From the results of simulation, the characteristics of cooling pattern is strongly affected by the velocity of train and the material of shoe. The face lift of shoe affects on the temperature distribution of rear surface of shoe as well as the front surface of that. Due to the grooves in shoe, it will be expected to cool the frictional heat and result in the reduction of maintenance efforts.

• International Journal of Aerospace System Engineering
• /
• 제2권2호
• /
• pp.40-43
• /
• 2015

A hybrid mesh based finite volume compressible flow code (PolySim) has been developed recently. Instead of the simple average method for the gradients of variables at each face, the volume average is applied for the calculation of the viscous flux. What is more, an improved Green Gauss method for the calculation of the gradient is also presented. These two techniques will improve both the accuracy and robustness of the code. The aerodynamic performance of this in-house cell centered code is examined by several widely-used bench-mark test cases. These cases include flows over flat plate and RAE 2822 etc. The comparisons on results between calculation and experiment are conducted. They show that the code can produce good numerical results which agree well with the corresponding experiment data.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 1999년도 추계학술대회 논문집
• /
• pp.93-98
• /
• 1999

Numerical simulation is conducted to clarify the heat transfer and fluid flow characteristics of brake disk-lining for rolling stock. Multiple rotational reference frame, k-epsilon turbulent model and SIMPLE algorithm based on finite volume method are used to solve the physical disk-lining model. The governing equations are solved by TDMA(TriDiagonal Matrix Algorithm) with line-by-line method and block correction, From the results of simulation, the characteristics of cooling pattern is strongly affected by the grooves in lining. The face lift of lining affects on the temperature distribution of rear surface of lining as well as the front surface of that. Due to the grooves in lining, it will be expected to extend the maintenance life circle of lining.

• Archives of Plastic Surgery
• /
• 제38권6호
• /
• pp.845-850
• /
• 2011

Purpose: In general, orientals including Korean, have a mesocephalic face whereas Caucasians, among the western, have a dolichocephalic face. Unlike the western, in orientals including Korean, prominent malar bones are recognized as stubborn and unattractive appearance. That is why reduction malarplasty is one of the most popular aesthetic surgical procedure in Korea. Many surgical methods to reposition prominent malar bones have been performed by means of a coronal incision or a combined incisions, using both the intraoral and the external incision. Bicoronal approach has advantage such as wide operative field, easy to maintain symmetry and possibility of combining facial lift but has shortcoming, such as external scars, long operative time, and the possibility of facial nerve or artery injury. Intraoral approach has advantages of short operative time, simplicity of procedure and no external scar. But this approach is associated with problems of cheek drooping, limited exposure and difficulty in making symmetry. Methods: During 8 years, we performed a reduction malarplasty without internal fixation through an minimal intraoral incision and dissection in 39 patients. Results: The patients were followed for 46 months, with satisfactory results and no cheek drooping. There was no patient who want to revise the inappropriate operative result such as asymmetry and incomplete correction. Conclusion: We conclude that minimal intraoral incision and dissection could acquire satisfactory result of reduction malarplasty along with prevention of cheek drooping.