• The Journal of Korean Academy of Prosthodontics
• /
• v.62 no.1
• /
• pp.82-94
• /
• 2024

This is a case report of complete mouth rehabilitation in a patient with generalized attrition and loss of posterior support. After analyzing the condition of the temporomandibular joint, multiple implants were placed to restore collapsed occlusion. Fixture/abutment level intraoral scanning was done instead of using conventional impression materials which entail multiple bite registration for cross-mounting. A 'jaw motion tracking'device, 'digital face-bow transfer', and 'double scan technique' which enables duplicating temporary restoration to definitive restoration were used to fabricate definitive prostheses. By using various digital techniques, complete mouth rehabilitation was done with minimal chair time in a patient with unstable occlusion.

• Journal of Navigation and Port Research
• /
• v.46 no.1
• /
• pp.57-72
• /
• 2022

The recent increase in international trade volume and explosive increase in cargo volume due to the non-face-to-face society are leading to an increase in risk exposure and safety accidents in the port logistics industry. Consequently, as the atmosphere and consensus on safety are spreading throughout the society, various safety laws are being enacted by the industry. Nevertheless, according to the industrial accidents status analysis by the Ministry of Employment and Labor, the average annual number of injured persons increased by 11.1% and the number of deaths by 4.0% from 2015 to 2019. This means that special attention should be paid to possible future risks and preventive measures for major causes of accidents should be established. Therefore, in this study, risk assessment was conducted based on 5,028 accident cases that were reported by the Korea Occupational Safety and Health Agency for 5 years, from 2016 to 2020, and major risk factors for each industry were derived, and then bow-tie analysis was conducted to perform the risk assessment; Further, the study aimed to derive the causes and preventive measures from the risk factors.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.29 no.3
• /
• pp.163-168
• /
• 2003

Three-dimensional solid model has not been widely used in surgical prediction of orthognathic surgery because frequent artifacts from occlusal restorations or prosthesis limited the usefulness of simulated surgery involving occlusion. We prepared three-dimensional(3D) solid model from CT data and integrated the 3D solid model with dental cast using a face-bow transfer technique combined with skeletal reference measurement and confirmation with cephalometric radiographs. With this simple and easy method, it was possible to predict bony interference between the proximal and distal segment of the mandible so that we can prevent condylar displacement after sagittal split ramus osteotomy of the mandible with prominent asymmetry. The method error was within 2mm and it seemed to be useful in preoperative planning for maxillofacial surgery with maxillo-mandibular occlusal change.

• The korean journal of orthodontics
• /
• v.37 no.5
• /
• pp.331-340
• /
• 2007

The aim of this study was to determine firstly the characteristics of esthetic lips in Korean females and secondly to measure the changes of the lips before and after anterior segmental osteotomy in bimaxillary protruded patients. Methods: Samples consisted of 30 models and 26 nonmodels, and 10 patients who had received anterior segmental osteotomy. Twelve linear measurements, 5 angular measurements, and the lip perimeter and area were measured. These results were compared for each group using unpaired and paired t-tests. Results: Full face width, nose to chin, upper vermilion height and angle, lateral heights at the point of the tips of Cupid's bow, central bow angle, and the lower lip to chin lengths were significantly greater in nonmodels than in models. However, overall lip width, lower vermilion height and angle, tip-to-tip of Cupid's bow lip perimeter, and lower vermilion area were greater in models than in nonmodels. Comparison of before and after anterior segmental osteotomy revealed that the values for the upper vermilion and lateral heights, the angle to Cupid's bow tip lengths, and upper vermilion area of post-operative patients had become similar to those of Korean female models. Our findings demonstrated that Korean female models have a fuller lower vermilion & thinner upper vermilion compared with nonmodel controls, as determined by the vermilion heights, angles, and areas. Conclusions: It will be helpful for clinicians to use these measurements as guidelines for improving patients' facial esthetics.

• The Journal of the Korean dental association
• /
• v.41 no.10 s.413
• /
• pp.720-727
• /
• 2003

Clinicians generally agree that Class III malocclusion is one of the most difficult to treat. When the Class III malocclusion is characterized by maxillary retrusion in growing patients, the use of a face mask may be the treatment of choice. Although face mask can achieve excellent orthopedic effects. It demands special patient compliance because it is worn extraorally and is not as esthetic or comfortable as intraoral appliance. This report presents the clinical cases of mandibular protrusion correction in growing patients, who were treated by TTBA(Tandem Traction Bow Appliance) that's a intraoral appliance.

• The korean journal of orthodontics
• /
• v.6 no.1
• /
• pp.71-77
• /
• 1976

19 years old female had untreated Veau classification class II cleft palate with ectopic eruption of upper right lateral incisor and congenital missing of lower lateral incisors. Upper left lateral incisor, left first molar aid lower left first molar were root restswithperiapicalpathologiclesions. So all root rests were extracted and prosthodontic rehabilitation after orthodontic treatment was planned. She was treated by means of multibanded system with face bow. After 23 months all orthodontic correction were achieved and, as soos as debanding procedure was done she was referred to oral surgeon and prosthodontist for surgical operation and bridge construction.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.35 no.1
• /
• pp.65-76
• /
• 1999

Our status of off-shore stow-net fishery is in face with many difficult problems; the lack of fisherman by evading the 3-D occupation, the safety accident by unskilled crew and old type fishing system. In order to solve those problems, it is necessary to save the man power and ensure the safety of fishing work by the effective utilization of power and automatization of fishing gear system. This is consists of the side drum driven by main engine, the net hauler, the bow and stern capstan, jib crane etc. Therefore, we suggest the design on unification of power device of fishing gear system as follows; (1) fishing system by uni-hydraulic power and (2) fishing system by electric motor and electro-hydraulic power.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.28 no.12
• /
• pp.776-780
• /
• 2015

In this paper, we have studied the effect of mechanical polishing to Ga-polar face for reducing the wafer bowing and strain in free-standing GaN. After the mechanical polishing to Ga-polar face, the bowing of the free-standing GaN substrate significantly decreased with increasing the size of diamond slurry, and eventually changed the bowing direction from concave to convex. Furthermore, the full width at half maximum (FWHM) of high-resolution X-ray diffraction (HR-XRD) were decreased, especially the FWHM of (1 0 2) reflection for $1.0{\mu}m$ size of diamond slurry was significantly decreased from 630 to 203 arcsec. In the case, we confirmed that the compressive strain in Ga-polar face was fully released by Raman measurement.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2022.06a
• /
• pp.389-390
• /
• 2022

Recently, Recently, the increase in international trade volume and the explosive increase in cargo volume due to the non-face-to-face society are leading to an increase in risk exposure and safety accidents in the port industry. In addition, as the Serious Disaster Punishment Act came into effect on January 27, 2021, various guidelines and laws to protect safety and life in port terminals are being enacted. However, despite these efforts, medium-to-large safety accidents in the port terminal industry continue to occur. According to the Korea Occupational Safety and Health Agency, from 2016 to 2019, the number of casualties in the port handling industry increased by 4.2%. For effective follow-up management of port accidents or the preparation of related safety laws/systems, a risk analysis in consideration of the cause and damage of the accident must be conducted first, so that realistic accident reduction and prevention measures can be established. Therefore, in this study, major risk factors and preventive measures were derived by conducting risk assessment based on 1,039 cases of port terminal accidents collected by the Korea Occupational Safety and Health Agency for 5 years from 2016 to 2022. After that, the priorities for preventive measures were determined through IPA analysis, Borich needs analysis, and The Locus For Focus analysis.

• The Journal of Korean Academy of Prosthodontics
• /
• v.8 no.1
• /
• pp.37-41
• /
• 1968

The purpose of this paper is to evaluate the number of occlusal contacts in centric occlusion. The 50 strictly selected subjects, who have good natural dentition and occlusion, were impressioned with Alginate Impression material, and dental stone models were madel. After transfering the models from mouth to Hanau Articulator Model H2 by means of SM type Face-Bow, condylar guidances were registered, red articulating papers($13{\mu}$ in thickness) were inserted between upper and lower posterior teeth, and the red marked points and lines were counted as occlusal contact points. 1. The number of occlusal contact points in centric occlusion were 1st Molars 2nd Molars, 2nd Premolars and 1st Premolars in order. 2. The number of occlusal contact points of right side showed comparatively much more than those of left side. 3. The number of occlusal contact points of upper in Premolar area were much more than those of lower, and in Molar area were the reverse. 4. The total number of occlusal contact points in centric occlusion were approximately 105 points.