• Geomechanics and Engineering
• /
• v.14 no.4
• /
• pp.337-344
• /
• 2018

The study of the mining effect influenced by a normal fault has great significance concerning the prediction and prevention of fault rock burst. According to the occurrence condition of a normal fault, the stress evolution of the working face and fault plane, the movement characteristics of overlying strata, and the law of fault slipping when the working face advances from footwall to hanging wall are studied utilizing UDEC numerical simulation. Then the inducing-mechanism of fault rock burst is revealed. Results show that in pre-mining, the in situ stress distribution of two fault walls in the fault-affected zone is notably different. When the working face mines in the footwall, the abutment stress distributes in a "double peak" pattern. The ratio of shear stress to normal stress and the fault slipping have the obvious spatial and temporal characteristics because they vary gradually from the higher layer to the lower one orderly. The variation of roof subsidence is in S-shape which includes slow deformation, violent slipping, deformation induced by the hanging wall strata rotation, and movement stability. The simulation results are verified via several engineering cases of fault rock burst. Moreover, it can provide a reference for prevention and control of rock burst in a fault-affected zone under similar conditions.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.8B
• /
• pp.971-978
• /
• 2011

There is a method to judge state of organs by looking color and shape of face in diagnosis of Oriental Medicine, So, to diagnosis of health condition has been applied development medical services act of using it as check for defects of organs in face. In this paper, we performed analysis white pupils and left cheek in face area change of color according to accrue of alcohol associated with liver function status based on diagnosis method Oriental Medicine. From that, we applied Lab digital color system to extraction of left cheek and white pupils area in facial image. To analysis patterns in color change of left cheek. white pupils area according to alcohol accumulative steps carried out study based on analysis of medical interrelationship of liver function,

• The Journal of Korean Academy of Prosthodontics
• /
• v.34 no.3
• /
• pp.457-463
• /
• 1996

An esthetically pleasing result in denture service is dependent upon several consideration. Esthetic considerations for the edentulous patient include tooth size, shape, arrangement, positioning, gingival contour, age, sex, personality differences, and ethnic type. Especially, the form of anterior artificial teeth is an important factor on the esthetics. The selection of artificaial teeth requires understanding and knowledge on physical and biologic factors and has to meet the indivisul esthetics and functional needs of each patient. However, the selection of artificial teeth is based on the large degree of subjective judgement of the dentist, Therefore, this is one of the most unscientific processes. Many attempts have been made to find a guideline for the selection of artificial teeth. Temperamental theory by White and Hall utillized with the physical characteristics such as body size, body form, color of eyes and hair, and disposition. SPA theory by Frush and Fisher utilized with the basis of sex, personalities, and age of the indivisual. There has not been provided for a guideline and study on the selection of artificial teeth for Koreans yet. This study was aimed to evaluate the William's typal matching theory in Koreans. 1. The facial forms of korean adult were ovoid(46.3%), square(36.7%) and tapered(17.0%) form. 2. The anatomic forms of natural maxillary incisors were ovoid(45.3%), tapered(31.3%), square(23.3%) form. 3. The forms of face and natural maxillary incisors were ovoid(21.9%), squared(11%), tapered(6.3%). 4. The natural maxillary incisors were similar in form to the facial form only in 39%. There was no correlation between the form of the face and the form of natural maxillary central inisors in Koreans. 5. Artificaial teeth which was selected according to the typal matching theory did not represent the form of the natural teeth in 61 per cents of the fatal, but it felt that they harmonized with the form of the patient's face and produced good results.

• Convergence Security Journal
• /
• v.19 no.1
• /
• pp.67-78
• /
• 2019

Most existing facial expression recognition methods use a uniform grid method that divides the entire facial image into uniform blocks when describing facial features. The problem of this method may include non-face backgrounds, which interferes with discrimination of facial expressions, and the feature of a face included in each block may vary depending on the position, size, and orientation of the face in the input image. In this paper, we propose a variable-size block method which determines the size and position of a block that best represents meaningful facial expression change. As a part of the effort, we propose the way to determine the optimal number, position and size of each block based on the facial feature points. For the evaluation of the proposed method, we generate the facial feature vectors using LDTP and construct a facial expression recognition system based on SVM. Experimental results show that the proposed method is superior to conventional uniform grid based method. Especially, it shows that the proposed method can adapt to the change of the input environment more effectively by showing relatively better performance than exiting methods in the images with large shape and orientation changes.

• Korean Journal of Head & Neck Oncology
• /
• v.40 no.1
• /
• pp.55-58
• /
• 2024

Myxoma is a locally invasive neoplasm usually involving the jaw bones, typically occurs between the second and fourth decades. This tumor may comprise 3%-6% of odontogenic tumors. Myxomas of the soft tissue of the face are very rare. We present an unusual case of myxofibroma occurring in a 13-year-old man involving the soft tissue of the face. It congenitally occurred and was a 1 cm sized, ovoid in shape, swelling located on the glabella without any symptoms. An excisional biopsy was performed. A well encapsulated ovoid mass was attached to the corrugator supercilli muscle below the frontalis muscle. It was measured 1.1 × 1 × 0.8 cm and completely excised. Histological examination revealed myxofibroma showing stellate and spinde-shaped cells throughout myxoid ground substance. The unusual features of this case are the site of the tumor, which was localized to the non-tooth bearing area of the mandible and its congenital occurrence history.

• Journal of Plant Biology
• /
• v.37 no.2
• /
• pp.203-221
• /
• 1994

Pollen grains of 19 taxa belonging to 12 genera in 5.families of the Korean gymnosperms were investigated by LM, SEM and TEM, and their morphological characters were described and palynological keys were made for each family. From the taxonomic viewpoint, palynological characters are very available to intergeneric and intrageneric classifications since their distinctive differences in pollen shape, size, condition of surface, sculpture pattern and presence of air bladders and projection except for the intrageneric classification of the genus Pinus since the overlapped characters such as pollen size and sculpture pattern. Pollen grains of Picea koraiensis in the family Pinaceae are distinguished from thc genera Pinus and Abies for the reasons that shape of air bladders are irregular, air bladders are bigger than pollen body, and pollen wall is thin. Compared with the genera Abies and Pinus that have air bladders, Picea koraiensis is closely related to Abies in that pollen body wall become gradually thin from pole of proximal face to air bladder, surface of pollen body is not rough, and pollen size is similar to that of the genus Abies. The presence of ektexine and enexine in proximal face, and the connections of the former to air bladder wall and the latter to distal face were elucidated by the investigation of pollen grains with air bladders through TEM. Endexine of the families of Taxaceae, Taxodiaceae and Cupressaceae was also obse-rved as a pile of laminae. From the observation by SEM, sculpture pattern of air bladder was foveolate with fine pits on surface. Sculpture pattern of air bladder is reticulate under LM, but observed by TEM, it resulted from the transmission of netted structure in air bladder.

• The Korean Journal of Quaternary Research
• /
• v.5 no.1
• /
• pp.47-61
• /
• 1991

Textural analysis of gravels of raised beach (old beach) in the Weaver Peninsula, King George Island, Antarctica has been carried out as a first part study among 20 other sites surveyed in the Weaver Peninsula and Barton Peninsula, King George Island. The raised beach described as WP-5 in this paper is 3.95 m higher than the present beach in elevation. And it is described as old beach. The beach shows typical subenvironment, that is, beach berm and beach face. Mean size, mean roundness and mean sphericity of gravels from beach berm are -4.10ø, 0.44 and 0.66 respectively. However, mean size, mean roundness and mean sphericity from beach face are -4.23ø, 0.41 and 0.67 respectively. In particular, it seems to be worthy to note the differences of textural parameters between Antarctic glacio-marine beach gravels and temperate and normal marine beach gravels. Under such conception the present study wishes to show only textural parameters, i.e., size, roundness, sphericity and shape obtained from the analysis of Antarctic glacio-marine beach gravels.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.3
• /
• pp.1664-1670
• /
• 2015

As journal bearing has a sliding motion between the shaft and bearing with lubricating oil, it produces a hydrodynamic lubrication condition. Journal bearing can receive a large force because it takes a distributed load at the large friction face. As the oil groove or oil hole is made in the journal bearing surface for the journal bearing smoothly working under a hydrodynamic lubrication condition, sufficient lubricating oil is supplied through the clearance of journal bearing. The performance of the journal bearing is changed according to the shapes, sizes and positions of an oil groove. In this paper, the flow rate according to the oil groove shapes (triangle, semicircle and rectangle) among the various oil supply conditions was measured. The shape that discharges the highest flow rate was observed and the groove shape of optimal performance for the journal bearing was determined. The results showed that the flow rate increases with decreasing operating temperature, the influence of temperature on the flow rate decreased with increasing rotational speed, and flow rate in the triangular groove shape was greater than in other shapes.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.40 no.4
• /
• pp.351-359
• /
• 2004

Aluminum honeycomb sandwich panel (AHSP) not only have high flexural rigidity and strength per density but also excellence in anti-vibration and anti-noise properties. Their properties are very useful for build airplane and high speed crafts, which need lighter-weighted and more strengthed element. Recently, the AHSP is regarded as a promising strength member of light structures like the hull of high speed crafts. Generally, the core shape of aluminum sandwich panel (ASP) is the hexagonal shape of honeycomb. But, in this paper, authors proposed the ASP with pyramid core, as the ASP model of new type, and analysed the structural and vibrational characteristics for aluminum pyramid sandwich panel (APSP) as this new ASP type, according to the thickness variation of core and face, the height variation of core. The applied sandwich models have isotropic and symmetrical aluminum faces and pyramid cores. And, the applied boundary conditions are simple, fixed and free support.

• Journal of the Korea Furniture Society
• /
• v.22 no.3
• /
• pp.151-159
• /
• 2011

This study is to suggest versatile chair designs that are organically shaped to take individual orientation. This study intends to provide design method to ensure the face of the chair that contacts the body of its user is transformed flexibly to support the body. The movement of human body is not just a behavior but the ways and tools that reflexively express against external stimuli that are sensed and identified by the person. The versatile chair whose users' sitting position is fixed is made by covering the lump form with a piece of cloth ensuring that the content is firmly fixed and by placing the beads-woven wood fabric according to the shape. And then, it is covered with the external cover. The proposed versatile chair designs assume specific forms as follows: First, it is a versatile chair whose user's sitting position can fix. The organically-shaped form that can accept varying postures is made as a mass, which changes into different shapes when human body touches the form so that users can lie down or sit. Due to such transformation, body posture is determined and individual differences in shape changing are all acceptable. Second, it is a versatile chair that reflects the user's position in a fixed chair, where a cloth-wrapper feature is applied to the form a sifit wrapped postures so that a variety of body postures can be accepted. Finally, a versatile chair that reflects the user's position by changing the shape of is covered with forms so that it will be transformed and used in accordance with situations and chair shapes and reflect multiple shapes including round or square ones.