• Journal of Environmental Science International
• /
• v.15 no.10
• /
• pp.945-949
• /
• 2006

For a membrane bio-reactor, it is possible to fillet and separate activated sludge and effluent by head loss of centimeters, if non-woven fabric material is used as titration media. However, if non-woven fabric material is used to thicken high-concentration sludge, excessive sludge attachment causes the rapid decrease of flux. Mesh with fore sizes of $100{\mu}m,\;150{\mu}m,\;and\;200{\mu}m$ allows for easy separation of attached sludge. This study examined the possibility of mesh as filtration media. Existing close-flow filtration process, which requires maintaining sludge movement, makes It difficult to obtain high thickening rate. With a view of complementing this weakness, this study has made an experimental examination on how high-concentration sludge (about 3,000mg/L to 10,000mg/L) will be filtered and thickened when mesh module is submersed in the bio-reactor. Effluent flowed from the bottom of the bio-reactor by head loss of 65cm. In case of pore size of $100{\mu}m$, SS showed high recovery of 80% to 96%; therefore, it has been decided that mesh can be used as filtration media. Filtration lasted for more than 9 hours, until sludge with 9,000mg/L in MLSS concentration was thickened 9 times as dense. In the range from 3,610mg/L to 9,060mg/L in MLSS concentration, it was possible to obtain effluent with less than 2mg/L in MLSS concentration within 10 minutes.

• Geotechnical Engineering
• /
• v.12 no.4
• /
• pp.157-178
• /
• 1996

Current design methods for reinforced earth structures take no account of the magnitude of the strains induced in the tensile members as these are invariably manufactured from high modulus materials, such as steel, where straits are unlikely to be significant. With fabrics, however, large strains may frequently be induced and it is important to determine these to enable the stability of the structure to be assessed. In the present paper internal design method of analysis relating to the use of fabric reinforcements in reinforced earth structures for both stress and strain considerations is presented. For the internal stability analysis against rupture and pullout of the fabric reinforcements, a strain compatibility analysis procedure that considers the effects of reinforcement stiffness, relative movement between the soil and reinforcements, and compaction-induced stresses as studied by Ehrlich 8l Mitchell is used. I Bowever, the soil-reinforcement interaction is modeled by relating nonlinear elastic soil behavior to nonlinear response of the reinforcement. The soil constitutive model used is a modified vertsion of the hyperbolic soil model and compaction stress model proposed by Duncan et at., and iterative step-loading approach is used to take nonlinear soil behavior into consideration. The effects of seepage pressures are also dealt with in the proposed method of analy For purposes of assessing the strain behavior oi the fabric reinforcements, nonlinear model of hyperbolic form describing the load-extension relation of fabrics is employed. A procedure for specifying the strength characteristics of paraweb polyester fibre multicord, needle punched non-woven geotHxtile and knitted polyester geogrid is also described which may provide a more convenient procedure for incorporating the fablic properties into the prediction of fabric deformations. An attempt to define improvement in bond-linkage at the interconnecting nodes of the fabric reinforced earth stracture due to the confining stress is further made. The proposed method of analysis has been applied to estimate the maximum tensions, deformations and strains of the fabric reinforcements. The results are then compared with those of finite element analysis and experimental tests, and show in general good agreements indicating the effectiveness of the proposed method of analysis. Analytical parametric studies are also carried out to investigate the effects of relative soil-fabric reinforcement stiffness, locked-in stresses, compaction load and seepage pressures on the magnitude and variation of the fabric deformations.

• 연구논문집
• /
• s.29
• /
• pp.111-121
• /
• 1999

Weft insertion and Beating mechanism which weaves fabric with completion the pattern of warp yarn and weft yarn in the high speed rapier loom is driven by cam operating method. This mechanism has 4 cams on the coaxial line for driving. These cams form a pair by two. and perform a conjugate motion with each other. By this reason, it is necessary for two pairs to realize the synchronized motion through exact and optimal design. From this viewpoint, to analysis the whole cams' movement and to realize the high speed of rapier loom, I tried to develop the computer aided simulation program. In this study, I would like to introduce the simulation program about above-mentioned 4 kinds of cam mechanism which can display the profiles of 2 pairs of cam mechanism not to speak of mutual relationships of their movement on the monitor.

• Fashion & Textile Research Journal
• /
• v.10 no.6
• /
• pp.1023-1035
• /
• 2008

This study conducted a survey to find out dermatitis patients' preferred garment performance and their sentiment in spring/summer knitwears. SPSS 12.0 program was used for factor analysis, frequency analysis, T-test, ANOVA, and Duncan test. The result was as follows; First, in garments, patients required 'health hygiene', 'practicality in use care', 'skin contact' and 'easy movement'. Especially, 'skin contact' is an important property to be considered in patients' clothes. Second, in garment sensitivity, patients importantly considered 'modesty', 'feminine', 'boldness', 'decency', 'easy movement', 'youth', and 'simplicity'. Third, patients preferred simple and modest plain knitwear in light color with thin and soft fabric such as plain knit. And especially, dot pattern in knitwears should be avoided. Fourth, the preferred style of patients was that 'appropriately fit with suitable ease.' They also preferred 'front closed,' ; 'boat neckline' and 'V neckline'; 'raglan sleeve' and 'set-in sleeve'. For hem trim, they preferred 'rib'. Male preferred simple and plain style with round collar of 'tubular trim' and 'rib trim', while female preferred sophisticated and characteristic style with setin sleeve.

• The Research Journal of the Costume Culture
• /
• v.4 no.1
• /
• pp.93-109
• /
• 1996

Madeleine Vionnet, a representative designer of the 1920′s, who made prefectly organized clothes with unique formativeness was the first to express fabric in a modern method and was called "The architect of fashion". This is because she developed a three dimensional design by expressing cloth-she rejected corset, should pad, etc-into elegant curved lines that do not stick to the body. By granting meaning to the beauty of the body and its movement in her own unique ways, she emphasized the formativeness in her work and gave shape to creative artistry. Expecially with the "Bias-Cut" she could express the lines of the body more flexibly and could make geometrical styles like the diamond shape dress or the triangle dress more effectively. Using the "Tired Bias cut" and "Handkerchief point" she let the skirt hemline dangle irregularly in geometrical forms, thus showing modern formative sense which forms a three dimensional solidness along the movement of the human body. Thus far, analyzed how the contemporary trend of art was reflected in her designs by studying her work; also investigated through her artistic characteristics and pattern method. Also be tried to find out what can be learned through her artistic view and superb formativeness as a designer.

• Science of Emotion and Sensibility
• /
• v.13 no.2
• /
• pp.391-402
• /
• 2010

In this study, breathable waterproof materials were prepared by electrospinning. Five kinds of electrospun nanofiber web layered systems with different levels of nanofiber web density, as well as different substrates and layer structures were fabricated, and their mechanical properties (tensile, bending, shear, compression, surface, and thickness & weight) were measured by the KES-FB system and compared with those of conventional breathable waterproof fabrics (densely woven fabric, PTFE laminated fabric and PU coated fabric). The KES-FB measurements demonstrate that the lab-scale nanofiber web layered systems are more flexible and fuller than commercial nanofiber web layered systems, which have a more compact structure than the lab-scale nanofiber web layered systems. Densely woven fabrics and lab-scale nanofiber web layered systems showed lower values of tensile linearity (LT), bending stiffness (B), and shear stiffness (G) than those of PU coated and PTFE laminated fabric. These results indicate that they are more flexible and have less resistance to the shearing movement, corresponding to a more pliable material having a better drape, than PU coated fabrics and PTFE laminated fabrics.

• The Research Journal of the Costume Culture
• /
• v.6 no.4
• /
• pp.84-103
• /
• 1998

The purpose of this study si focused on Futurism style and contemporary fashion in the 20th century, by researching the Giacomo Balla, Fortunato Depero, Tullio Crali, Erenesto Thayate characteristics fashion design. The results of this study are following as : The general traits of Futurism style are classified with aesthetics, formative characteristics. First, aesthetic characteristics are based on H. Bergson's life-phylosophy and F. Nietzche's art theory. Second, formative characteristics is Dynamism. Futurism Dynamism are classified with psychological Dynamism and physical Dynamism. Futurism trends in the costume : first, dynamism in fashion design, second, asymmetrical balance, third, formativeness, forth, technology, fifth, anti-traditionalism. Dynamism are expressed textile, pattern and costuem shape in contemporary dress. Asymmetrical balance are expressed costume silhouette shape and framework through the geometrical asymmetrical balance. Formativeness are agree with Paco Rabanne's fashion design expressed body and movement and phychological world of human through the secondly fabric. Technology are expressed new mechanical dynamism in used technology art and new fashion material by metal. The last, anti-traditionalism is recognized new value and idea in fashion.

• Journal of Fashion Business
• /
• v.6 no.3
• /
• pp.1-14
• /
• 2002

According to Scythian tradition, many burials contained numerous artifacts, from weapons and harness to everyday objects and a multiplicity of personal adornments. Most valuable of all is the Scythian Gold often lavishly decorated with precious stones. The detailed images on these pieces make it possible for us to picture the appearance of the Scythians, their clothes and weapons. Scythian Gold Plaques were attached to the fabric in such a way that when they moved with each movement of the wearer it created what must have been a dazzling sight in bright daylight. Scythian Gold Plaques were divided into several types according to the shape, animal style(curved beast shape, profile shape, head reversed over its back shape), round shape, quadrilateral form, star shape, flower shape, crescent shape, bundle shape, human appearance. Through the antique tombs bequests of Three Kingdom States hereby describe the original forms of their source of Baekje gold plaque were influenced by Scythe style. Like nearly all Scythian ornaments, such gold pieces were designed to maximize various magical powers and to signify the owner's importance relative to his fellow tribesmen.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.23 no.1
• /
• pp.30-41
• /
• 1999

This study was conducted to verify the advantages of Gal-Ot. Gal-Ot is defined the clothings dyed with persimmon juice. Firstly the physical properties of fabrics were examined. Secondly the wear tests were conducted. The wear tests were performed in climatic chamber controlled 3$0^{\circ}C$ air temperature 50$\pm$5% R.H and 0.2m/s air movement. Four women subjects participated in this experiment and 4 times experiments were performed per one subject. The expeimental schedule was planned following 4 steps that is sedentary posture during 30 minutes-walking the 5。slope treadmill by 70m/min during 20 minutes-sedentary posture during 20 minutes-standing posture on toward the blowing wind during 10 minutes. The results obtained is as folows : The insulation of fabric was increased with dyeing with persimmon juice. The air permeability of fabric was remarkably increased with dyeing with persimmon juice. The mean skin temperatures of subjects were apt to be higher in wearing Gal-Ot than undyed clothing. The clothing micro temperature of subjects were slightly inclined to become lower in wearing Gal-Ot than undyed clothing, The clothing micro humidity was decreasee when: the subjects were gal-Ot than wore undyed clothing, And then it brought about more comfortable on wear sensation. The differences of physiological reactions were not consistent between clothing types except for sweat rate on the back. This result may be attributed the to complex experimental schdules consisted of four steps and to a little difference between open type and close type. However I consider that the clothing type of Gal-Ot is suitable for open type because Gal-Ot is summer wear for blocking the sultry heat.

• Fashion & Textile Research Journal
• /
• v.13 no.5
• /
• pp.759-768
• /
• 2011

This study is designed to understand current wearing conditions of air force mechanic parkas and evaluate their functionality by examining the wearing conditions and wearers' subjective assessment. By doing so, it also intends to identify issues that require improvements; and to provide basic data for future development of air force mechanic parkas. A survey was conducted as a study methodology, and the collected 1,628 questionnaires were analyzed. Findings of this study are as follows. 1. In the usability assessment, it was found that visibility of body sides was needed to be enhanced since reflective tapes were attached only to the front and back of the body; pockets were too big, but not convenient to keep mechanic tools; the design of hiding hood was not suitable for water-proof clothing; and a new design of size-controllable hood was called for since the hood blocked eye sight. With respect to the fabric, dissatisfaction was identified with durability, cold-proof and fire-proof features. 2. In the mobility assessment, respondents showed low satisfaction with collar heights and neck girths. Mobility score was over moderate level on average, except the parka length that obstructs wearers' movement, and neck and collar size. 3. In the wearability assessment, respondents presented moderate satisfaction with pleasantness, weight, pressure and dampness. However, insulation was found unsatisfactory. Based on the result, this study proposed improvement plans on design, pattern and fabric; and is expected to serve as basic data for developing more effective and functional air force mechanic parkas.