• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.24 no.12
• /
• pp.977-981
• /
• 2011

Non-wovens polyester rayon samples were manufactured, and the electrification properties of electrostatics were measured for three different samples (15 g/$m^2$, 25 g/$m^2$, and 40 g/$m^2$) with the environmental settings of temperature (20~40$^{\circ}C$) and humidity (40~90%). The conclusions are as follows. Heavy sample generated more static electricity when the temperature was constant. The static electricity decreased slowly when the humidity is less than 70%, while it sharply decreased over 70% humidity condition. For non-woven polyester rayon, static charge decreased as temperature and humidity increased. As the weight increased, less time were taken for the electrification voltage to drop to the half.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.41 no.1
• /
• pp.17-23
• /
• 2009

The influence of different forming elements on the local paper structure and the related paper properties was investigated in this study. Specifically, a conventional papermaking foil system and a velocity induced drainage (VID) system were compared. The study involved the analysis of the product samples obtained from the commercial machine trials. The paper samples produced with VID forming systems showed better formation. The deterministic patter in the local structural profile map of the Foil samples indicated the structure of foil samples was more supple after forming process and then easier to be marked by various fabrics such as wet pressing fabric. The higher bulk was observed in the VID samples, which resulted in higher scattering coefficient, lower ZDT strength, and higher bending stiffness.

• The Research Journal of the Costume Culture
• /
• v.15 no.5
• /
• pp.852-862
• /
• 2007

This study was to investigate the physical properties and the external characteristics of denim fabrics(100% cotton non-spun denim, 98% cotton/2% polyurethane spun denim) such as tensile strength, thickness and weight, flex stiffness, surface color and shrinkage. The results of the study were as follows. After examining the change of external characteristics of before and after washing finishing for denim fabrics, denim with bio washing had increased pliability compared to denim without washing finishing but the pliability of the denim did not increase according to the intensity or frequency of washing. The luminance change according to washing finishing was high in the order of bio stone bleach washing, bio stone washing, bio washing and denim without washing finishing and the surface color became brighter in accordance with the increase of intensity and frequency of washing finishing.

• Fibers and Polymers
• /
• v.6 no.3
• /
• pp.269-276
• /
• 2005

In this study, cross-cultural comparison of sound sensation for Korean traditional silk fabrics between Korea and America was performed and prediction models for sound sensation by objective measurements including sound parameters such as level pressure of total sound (LPT), Zwicker's psychoacoustic characteristics, and mechanical properties by Kawabata Evaluation System were established for each nation to explore the objective parameters explaining sound sensation of the Korean traditional silk. As results, Koreans felt the silk fabric sounds soft and smooth while Americans were revealed as perceiving them hard and rough. Both Koreans and Americans were pleasant with sounds of Gongdan and Newttong and especially Newttong was preferred more by Americans in terms of sound sensation. In prediction models, some of subjective sensation were found as being related mainly with mechanical properties of traditional silk fabrics such as surface and compressional characteristics.

• Textile Coloration and Finishing
• /
• v.18 no.3 s.88
• /
• pp.31-41
• /
• 2006

Functional properties are available with sputtering. But sputtering treatment alone cannot got a good fastness performance to washing, rubbing and light. This research was objected to investigate optimum condition by sputtering on polyester through various processing conditions such as ion current and treatment time, and then various resin treated onto metal coated polyester fabrics in order to increase washing fastness of metal membrane. As the results, the optimum conditions revealed 1500 mA of ion current, 2 min of treatment time in sputter, and suitable resin concentrations were 2% of o.w.s (on the weight of solution) in resin treatment. Therefore, we could get enhanced anti-static effect and flex stiffness as well as washing fastness in sputtered polyester fabric with various resin treatment, for example, melamine and polyurethane.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.31 no.5
• /
• pp.31-46
• /
• 1999

A drying paper strives to shrink due to the shrinkage of the individual paper fibres. Laboratory results show that a reduction of the shrinkage or an imposed stretch leads to a large increase in tensile stiffness and a large decrease in strain at break. In c cylinder drying section the water in the web is repeatedly heated on the drying cylinder and evaporated in the free draw. To evaluate the drying process regarding influence on paper properties these sub-processes, or drying phases, have to be studied separately. The effect of the conditions on the drying cylinder and on the VacRoll is investigated in pilot trails. Both the fabric tension on the drying cylinder and on the VacRoll reduces the shrinkage of the paper. The laboratory results are used as input to a numerical simulation of the conditions in the free draw. If the web width is increased or the length of the free draw is reduced the mean shrinkage of the paper web is reduced . However, the difference in shrinkage between the middle and the edge of the web is increased.

• The Research Journal of the Costume Culture
• /
• v.12 no.3
• /
• pp.407-414
• /
• 2004

A natural dye aqueous walnut shell extract was obtained by extraction of walnut shell using water at various conditions in this study. Silk fabrics were dyed at various dyeing and mordanting conditions using walnut shell extract and various mordants (Al, Cu, Fe ions). Studies have been made on the effects of dyeing and mordanting conditions on the dyeing properties and fastness (light, water and dry cleaning fastness) of dyed silk Fabric. The results obtained in this study were as follows;. The dye content in the walnut shell extract increased with increasing extraction temperature to 90℃ and extraction time to 120min, and thereafter the dye content decreased a little. The dry cleaning and water fastness of non-mordanted silk fabrics were better than those of mordanted silk fabrics.

• Fibers and Polymers
• /
• v.4 no.1
• /
• pp.32-37
• /
• 2003

The nonionic surfactant properties of ethoxylated azo dyes, such ai cloud point and surface tension have been investigated. The synthesized ethoxylated azo dyes could dye polyester fabric without any special pre-treatment. When the average number of ethylene oxide (EO) in the ethoxylated azo dye reached 6, its fixation could exceed $90^{\circ}C$ from the thermosol dyeing process. The average degree of condensation of ethylene glycol in the chain was interrelated with the dyeing results and did not affect on the maximum absorption wavelength (λmax) of the polyoxyethylene dye. When the average length of polyoxyethylene chain decreased, the molecular weight of dyes became smaller and the fixation of dyes was improved.

• Fashion & Textile Research Journal
• /
• v.12 no.2
• /
• pp.219-223
• /
• 2010

In this study, the comfort properties of cotton and Hanjee fabrics dyed with Inonotus obliquus and treated with illite were evaluated and compared. Results were as follows; 1) W/T values and WC/W values of cotton and Hanjee fabrics were decreased when they were dyed with Inonotus obliquus and treated with illite. 2) Although air permeability of cotton fabrics was higher than that of Hanjee fabrics, air permeability of cotton and Hanjee fabrics dyed with Inonotus obliquus and treated with illite was decreased. 3) Thermal conductivity of cotton and Hanjee fabrics dyed with Inonotus obliquus was increased whereas thermal retain property was decreased. 4) Water absorption of Hanjee fabrics was higher than that of cotton fabrics. Water absorption of cotton and Hanjee fabrics dyed with Inonotus obliquus and treated with illite was increased. 5) Deodorization rate of Hanjee fabrics was greater than that of cotton fabrics.

• Fashion & Textile Research Journal
• /
• v.10 no.5
• /
• pp.779-783
• /
• 2008

The main colorant of Morus alba L. fruit is anthocyanin which is a kind of flavonoid group. In this article, the dyeing properties of colorant extracted from Morus alba L. fruit were investigated on some silk fabrics. The results were as follows: The maximum absorbance of Morus alba L. fruit showed at 284 nm, and 516 nm by UV-VIS spectrophotometer. The dye adsorption increased according as dye concentration. The optimal dyeing temperature was $60^{\circ}C$ and the dye equilibrium was reached 40 minutes after dyeing. The highest K/S value of the colorant obtained at bath ratio 40:1. The effect of pH of dye solution showed higher K/S value at acidic than alkaline condition. Almost Mordants except pre-Fe and Sn did not significantly increased dye adsorption. The pre mordanted silk fabrics showed RP, P, and post mordanted ones showed PB, GY. The color fastnesses to light, washing, and perspiration were modified at pre-Sn mordanted samples.