• Korean Journal of Human Ecology
• /
• v.7 no.1
• /
• pp.175-182
• /
• 1998

This study was to investigated physical properties of lining fabric (Nylon, Acetate, Rayon and Polyester) such as shrinkage, tensile strength, moisture regain and crease resistance. The results were as follows. 1. The number of repeated washing times and the concentration of the detergent almost didn't affect on the change of tensile strength. 2. As washing increase more, the shrinkage of all sample was more increased. In the case of Rayon, it was showed that shrinkage was high by $1{\sim}3$ times washing. In the case of Nylon, it was showed minus shrinkage according to frequency of washing. 3. The moisture regain was very decreased by 1 times washing. But the moisture regain was increased with increase in frequency of washing and resulted in it was showed a similar value with controls. 4. As the frequency of washing and the concentration of detergent increase more, the crease resistance was decreased considerably because the elasticity of fiber decreased by mechanical force such as tension, bending and pressure and alkali.

• The Research Journal of the Costume Culture
• /
• v.21 no.6
• /
• pp.967-973
• /
• 2013

During high speed sewing, the needle thread is exposed to dynamic loading, short strike loading, inertia forces, friction, rubbing, force of check spring, bending, pressure, friction, impact, shock and thermal influence. The dynamic thread loading/tension alters throughout the stitch formation cycle and along its passage through the machine. The greatest tensile force occurs at the moment of stitch stretching, when the take up lever pulls for required thread length through the tension regulator. These stresses act on the thread repeatedly and the thread passes 50-80 times through the fabric, the needle eye and the bobbin case mechanism, before getting incorporated into the seam, which result in upto 40% loss in tensile strength of the sewing thread. This damage in the sewing thread adversely affects its processing and functional performance. In this paper, the contribution of dynamic loading, passage through needle and fabric, and bobbin thread interaction in the loss in tensile properties has been studied. It is observed that the loss in tensile properties occurs mainly due to the bobbin thread interaction. Dynamic loading due to the action of take up lever also causes substantial loss in tenacity and breaking elongation of cotton threads.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.15 no.3 s.39
• /
• pp.271-280
• /
• 1991

Emulsion graft copolymerization of MMA onto cotton fiber using Ce(IV) salt as an initiator was carried out. Graft yield and graft efficiency were observed according to the kinds and concentrations of emulsifier and polymerization conditions. The physical properties of MMA grafted cotton fabric were investigated. The results of this study were as follows: 1. The heighest graft yield of emulsion graft polymerization occurred at the concentration below cmc of emulsifier, which was different from emulsion polymerization. Nonionic sur- factant as an emulsifier was more effective than anionic one. 2. The highest graft yield was obtained at the initiator concentration $1{\times}10^{-2}mol/l$. The viscometric molecular weight of PMMA was in the order of 106. 3. As reaction time increased, the graft yield increased but the graft efficiency decreased. 4. Elevation of reaction temperature resulted in increase of graft yield. The apparent activation energy of MMA graft polymerization was 4.72 Kcal/mol. 5. Physical properties of MMA grafted cotton fabric varied with increase of grafting. Thickness and stiffness showed a noticeable increase, whereas tensile strength and elongation was slightly increased. Crease recovery increased as the graft yield increase up to $50\%$ and decreased thereafter.

• Textile Coloration and Finishing
• /
• v.18 no.5 s.90
• /
• pp.1-7
• /
• 2006

The dyeing properties of the several reactive dyes possessing different types of the reactive group on nylon 6 fabric have been investigated. Dyeing of nylon fiber with commercial reactive dyes was dependent on the dye bath pH. As pH increased, the extent of exhaustion decreased due to the deprotonation of the amino end group. But, the extent of fixation increased because of the enhanced reactivity with nylon fiber. It was found that all reactive dyes could be applied to nylon 6 reasonably at pH 5-6. But, the conflicting requirements of dye exhaustion and covalent bond formation limited the extent of fixation efficiency. The best method to improve the extent of the fixation efficiency of the reactive dyes was the conversion of sulphatoethylsulphone group to vinylsulphone group before dyeing with trisodium phosphate. The converted Supra type reactive dye gave the highest extent of fixation efficiency, which was about 90%.

• Textile Coloration and Finishing
• /
• v.20 no.3
• /
• pp.8-17
• /
• 2008

For the purpose of standardization and practicability of natural dyeing, the mordanting and dyeing properties of turmeric was studied. In this study, the colorants of turmeric were extracted with boiling water. Chitosan-crosslinked cotton fabrics was dyed with aqueous extract of turmeric and their dyeabilities on the fabrics were studied. Additionally the fastness to washing and light were also investigated. Cotton fabrics were treated with a crosslinking agent epichlorohydrin in the presence of chitosan to provide the cotton fabrics the dyeing properties of natural dye(turmeric) by the chemical linking of chitosan to the cellulose structure. The chitosan finishing and durable press finishing of the cotton fabrics occurred simultaneously in the mercerization bath. The dyeability(K/S), which was obtained by CCM observation, remarkably became increased when the crosslinked chitosan concentration was higher. Dyeability of turmeric was improved on chitosan-crosslinked cotton fabric rather than only cotton fabric, while the saturated dyeing time was 20minutes at $60^{\circ}C$. The hue value indicated greenish yellow with increasing the crosslinked chitosan concentration. And the color fastness to washing and light was almost the same.

• ETRI Journal
• /
• v.32 no.5
• /
• pp.713-721
• /
• 2010

E-textile technology has earned a great deal of interest in many fields; however, existing wearable network protocols are not optimized for use with conductive yarn. In this paper, some of the basic properties of conductive textiles and requirements on wearable personal area networks (PANs) are reviewed. Then, we present a wearable personal network (WPN), which is a four-layered wearable PAN using bus topology. We have designed the WPN to be a lightweight protocol to work with a variety of microcontrollers. The profile layer is provided to make the application development process easy. The data link layer exchanges frames in a master-slave manner in either the reliable or best-effort mode. The lower part of the data link layer and the physical layer of WPN are made of a fabric serial-bus interface which is capable of measuring bus signal properties and adapting to medium variation. After a formal verification of operation and performances of WPN, we implemented WPN communication modules (WCMs) on small flexible printed circuit boards. In order to demonstrate the behavior of our WPN on a textile, we designed a WPN tutorial shirt prototype using implemented WCMs and conductive yarn.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.18 no.3
• /
• pp.287-297
• /
• 1994

The purpose of this study is to investigate the Improvement of fiber surface, tenacity & elogation, fabric counts, thickness, handle, moisture regain, static voltage, handle, dyeability when polyester fabrics are treated with NaOH solution adding quartemary ammonium salt (Benzyl dimetyl dodecyl ammonium chloride . BDMDAC) The results are as follows. I. In regard to the method of processing VET, when the PET fabrics are alkaline-hydrolyzed adding BDMDAC, the weight loss of PET fabrics increased remarkably to the increse of BDMDAC concentration than when they are treated only in NaOH solution. When PET fabrics are alkaline-hydrolyzed the amount of BDMDAC as the catalyst is proper lg/1 II. The change in physical & chemical properties of alkaline-hydrolyzed PET fabrirs. 1. As the amount of the weight loss on PET fabrics increased, the void space of the PET yale increased but tenacity & elongation and thickness decreased. 2. The fabric counts of PET increased due to shrinkage by alkaline-hydrolydzing. 3. As the amount of of the weight loss on PET fabrics increased. NUMERI, FUKURAMI, increaseed and KOSHI decreased and Total hand value(T.H.V) in all cases increaseed. When the weight Ioss is 30.9% T.H.V. is best. 4. Moisture regain of PET fabrics a little increased by alkaline-hydrolyzing treatment. As the weight loss increased, static voltage is decreased. 5. The last dye absorption is different according to the degree of the Affinity. In regard to the difference of dye color, the dyestuff of low molecular weight dyed for deep color.

• Textile Coloration and Finishing
• /
• v.3 no.3
• /
• pp.15-22
• /
• 1991

The effects of electrolytes on color fastness properties of cotton fabric with Congo Red have been studied at $90^{\circ}C$. Each dyeing carried with $10 \times 10^{-6}M$ of Congo Red and with various concentration of electrolytes. The results obtained from this study were as follow 1. In the case of none, the fastness to washing became worse, but the fastness to light better with increasing dye concentration. 2. In the case of additing an electrolyte, the fastness to washing became worse and the fastness to light better than the case of none. The samples had become yellower after washing test. Yellowness had been reduced after fade-O-meter test. 3. What kind of electrolytes could not have any effect on the fastness to washing, but they influenced the fastness to light in the order of LiCl

• Proceedings of the Korea Contents Association Conference
• /
• 2004.05a
• /
• pp.473-477
• /
• 2004

Cotton fabric was treated with Cationon UK(tertiary ammonium salt) to improve the dyeability to black tea colorants. In order to investigate the efficacy of Cationon UK for improving dyeing properties of cotton fabric, the effect of Cationon UK treatment conditions and dyeing conditions on dye uptake of the cotton fabrics treated with Cationon UK were examined and the colorfastness to washing, perspiration, rubbing and light was also evaluated for practical uses. Cationized cotton treated with Cationon UK showed high dye uptake at lower dyeing concentration and shorter dyeing time, compared with untreated. Dyeing temperature did not affect significantly dye uptake and the maximum dye uptake was obtained at pH 5. Most colorfastness was relatively good, showing 4/5∼5 rating.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.46 no.6
• /
• pp.16-25
• /
• 2014

This study was investigated in optimum condition of pulping of ramie and the mechanical properties of non-woven fabric for the performance of ramie/cotton panty liner. The result of pulping condition on ramie was most suitable for type I (mixed NaOH with $Na_2CO_3$ in 30%:70%). The sample (I) was showed yield value of 68.2% and the best fibrillation and lignin removal rate. The non-woven fabrics of ramie/cotton were made in range of ramie content of 0, 15 and 30%. As ramie content increased, so were increased in air permeability, compressive strength and compression recovery rate. But surface roughness and compressional energy were decreased. Therefore, the non-woven fabrics of ramie/cotton are very suitable in hygienic goods for female panty liner. The ramie panty liner showed a little decrease in absorption and strength, as increasing the amount of ramie. But the performance of ramie panty liner was appeared beyond standard values used by usual panty liner.