• Proceedings of the Korean Society of Dyers and Finishers Conference
• /
• 2007.11a
• /
• pp.67-68
• /
• 2007

• Proceedings of the Korean Fiber Society Conference
• /
• 2002.04a
• /
• pp.404-409
• /
• 2002

양모 소비의 증가와 함께 고급화, 다양화 등 소비자의 요구도 커짐에 따라 이러한 소비자의 요구를 만족시키기 위한 많은 연구가 행해져 왔다. 양모는 그 자신이 원래, 다종기능을 갖는 섬유이며 건강유지에는 이상적이지만 그 기능을 강조하는 가공, 새로운 기능을 부가하는 가공 등 종래의 가공기술을 개량, 혁신하여 가는 것이 중요하다. 특히 세탁하여도 줄지 않거나 보관과 취급이 용이한 방축성이 크게 요구됨에 따라 방축가공에 관한 연구가 활발히 이루어졌다. (중략)

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.17 no.10 s.113
• /
• pp.920-928
• /
• 2006

Fiber-reinforced composites transmitting microwaves of certain frequencies or bands were proposed. These frequency selective fabric composites(FSFCs) are fabricated by weaving carbon fibers and dielectric fibers that build periodic patterns. Design parameters affecting the electromagnetic characteristics of FSFCs were widely discussed, Then the electromagnetic characteristics of a fabricated plain-weave FSEC were investigated with regard to the electrical conductivities of carbon roving, the fiber undulation, and the aperture-to-cell ratio, for the electrical conductivities, its dependence on frequency as well as on the fiber volume fraction of carbon roving was taken into account. Constituent material properties and the fiber undulation had little effect on the EM properties of the fabricated FSFC, while the aperture-to-cell ratio made a profound effect on them.

• Textile Coloration and Finishing
• /
• v.22 no.4
• /
• pp.341-348
• /
• 2010

Sodium sulfate is commonly added in reactive dyebath in order to increase substantivity of the reactive dye to cellulose fiber by reducing repulsion between anionic dye and fiber. While sodium sulfate is mostly used in solid form, it is inconvenient to dissolve a large amount of powder sodium sulfate. Furthermore, if there is undissolved salt in dyebath it might cause unlevel dyeing. In this study, sodium sulfate in liquid or solid form was used in dyeing of cellulose fabric with reactive dyes of three primary color and the effect of type or amount of sodium sulfate on dyeing and fastness properties was investigated. When the amount of sodium sulfate rose to 30-50 g/l, K/S value of the dyed fabric markedly increased; further rise in sodium sulfate concentration resulted in slow increase in K/S value. For light color, optimum amount was about 30 g/l in solid form and 50-100 g/l in liquid form while, for medium to deep color, it was 50 g/l and 100-150 g/l in solid and liquid form, respectively. When using each optimum amount of salt in solid or liquid form for medium color, shape of dyeing curve as well as exhaustion was similar to each other. On the whole, similar color fastness results were obtained regardless of type or amount of sodium sulfate.

• Polymer(Korea)
• /
• v.31 no.4
• /
• pp.315-321
• /
• 2007

Aminated PONF-9-GMA ion exchange fabrics were synthesized by radiation induced graft copolymerization. Hybrid ion exchange fabrics combined with aminated PONF-g-GMA fabrics and anionic ion exchange resin were also fabricated by hot melt adhesion method and then their adsorption properties were investigated. Ion exchange capacity of the hybrid ion exchange fabrics was higher than ion exchange fabric and was lower than bead resin. The maximum value was 4.18 meq/g. Adsorption breakthrough time for vanadium of the hybrid ion exchange fabric was 550 min, which was faster than bead resin but slower than fibrous ion exchanger. The Breakthrough time of the hybrid ion exchange fabrics gets longer with increasing pH. The initial breakthrough time occurred around 400 min with increasing vanadium concentration.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.41 no.5
• /
• pp.929-938
• /
• 2017

This research investigated the effects of cool touch fabrics on thermo-regulating physical properties and subjective evaluation using a 3D fitted women's T-shirts in wear test. Qmax, clothing microclimate, microclimate wettedness, thermogram and subjective vote were observed during rest-right after an exercise-rest protocol. As a result, there was no single determining physical variable to explain the reasons of cool sensations of T-shirts made of cool touch fabric across the entire protocol. Qmax could partly predict a wear sensation at the initial stage when only insensible perspiration was presented. Simultaneous observation of temperature/humidity gradient understand from the inside to the outside of the clothing layer or microclimate wettedness calculated using vapor pressure were helpful to figure out the performance of cool touch fabric, especially at the later stage of the protocol when sweating was excessive. It was especially difficult to connect thermo-regulating physical variables to the subjective evaluation during transient conditions such as 'right after exercise' stage. It is necessary to measure the amount of heat and moisture transferred from the skin to the outside of clothing along with the physical properties measured in this study to understand the detailed mechanisms of why a cool sensation is evoked from tight fitting T-shirts made of newly developed cool touch fabrics.

• Fashion & Textile Research Journal
• /
• v.10 no.4
• /
• pp.552-559
• /
• 2008

Recent days, various inner wears, sheets and interior goods are manufactured using materials dyed with loess emphasizing its improved blood circulation, metabolism, anti-bacterial, deodorizing properties, and far-infrared ray emissions. The purpose of this study is to investigate the effect of chitosan treatment on the dyeing of cotton fabric using loess as colorants. Particle size of loess, the morphology and dyeability(K/S) of chitosan crosslinked cotton fabrics, and washing durability of loess dyed cotton fabric were investigated. In this study, cotton fabrics were treated with a crosslinking agent, epichlorohydrin, in the presence of chitosan to improve the dyeing properties of cotton fabrics with natural dye by the chemical linking of chitosan to the cellulose structure. This process was applied by means of the conventional mercerizing process. The results obtained were as follows; Mean average diameter of loess was $1.13{\mu}m$. According to various conditions, the optimum dyeing conditions for cotton fabrics pretreated by 1% chitosan treatment was where 10%(owb) of loess was applied at $90^{\circ}C$ for 120minutes, while for cotton fabrics without chitosan treatment was where 15%(owb) of loess was applied at $90^{\circ}C$ for 150minutes. Overall, K/S value of loess dyed cotton fabric pretreated with 1% chitosan was higher than that of cotton fabrics without chitosan treatment. The Color fastness, washing fastness and light fastness of loess were excellent as 4-5grade.

• Composites Research
• /
• v.23 no.3
• /
• pp.7-12
• /
• 2010

In order to increase the electrical conductivity and the mechanical properties of carbon fabric composites, multi-walled carbon nanotubes (MWCNTs) and carbon nanofibers (CNFs) were deposited on carbon fabrics by anodic and cathodic electrophoretic deposition (EPD) processes. In the cathodic EPD, carbon nano-particles and nano-sized Cu particles were simultaneously deposited on the carbon fabric, which gave a synergetic effect on the enhancement of properties as well as the degree of deposition. The hybridization of carbon nano-particles and micron-sized carbon fiber significantly improved the through-the-thickness electrical conductivity. In addition, both MWCNTs and CNFs were deposited onto the carbon fabric for multi-scale hybrid composites. Multi-scale deposition improved the through-the-thickness electrical conductivity, compared to the deposition of either MWCNTs or CNFs.

• The Research Journal of the Costume Culture
• /
• v.22 no.3
• /
• pp.431-439
• /
• 2014

This research verified the usefulness and practicality of citrus peel extract as a natural dye. This study dyed cotton, silk, and cotton/mulberry fiber blended fabrics using citrus peel extract, and measured the dyeability and functional property to verify their usefulness and practicality. The dyeing affinity of the citrus peel extract was measured by dyeing under alkaline conditions to determine the temperature and time for optimal dyeing conditions of the solution. The results show that a temperature and time of $60^{\circ}C$ and 30 minutes were optimal for dyeing cotton fabrics with citrus peel extract, $50^{\circ}C$ and 60 minutes for silk fabrics, and $60^{\circ}C$ and 60 minutes for cotton/mulberry fiber blended fabrics, respectively. In addition the results of measuring the color fastness of the cotton, silk, and cotton/mulberry fiber blended fabrics dyed with the citrus peel extract show that the color fastness was superior for washing, friction, sweat, and water. However, the color fastness for sunlight appeared to be slightly weak. In addition, it was found that fabric dyed with the citrus peel extract showed partial antimicrobial properties. The antimicrobial property appeared the greatest in the silk fabric. The cotton/mulberry fiber blended fabrics had 90% or more Staphylococcus aureus present, but the antimicrobial properties were not high in the cotton fabric. Additionally, the heavy metal content, which is harmful to the human body, appeared to be lower than standard figures, so the dye was found to be innocuous to humans. Therefore, when the results of this study are put together, citrus peel extract is sufficiently useful and practical as an ingredient for a natural dye. Moreover, there is ample possibility to develop citrus peel dyed fabrics as environmentally friendly fashion materials.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2017.05a
• /
• pp.238-239
• /
• 2017

Waterproofing is a very important process in terms of durability of buildings. The materials used for waterproofing work to protect the concrete structure from external deterioration factors. In particular, the waterproofing materials applied to the exterior of the concrete structure have various problems due to changes in the external environment and variables in the construction process. The waterproof layer is repeatedly dried and shrunk according to changes in the external moisture environment, and the surface may be deteriorated due to exposure to long-term sunlight. In the case of the roof waterproofing in the structure, the waterproof layer which does not have a sufficient curing period shows much swelling and floating phenomenon. These defects, such as swelling and lifting, account for most of the defects that occur in the waterproof layer of the concrete slabs. Generally, it is difficult to expect the same level of performance as the initial state even if the waterproofing work is repaired when a defect occurs. Therefore, it is possible to reduce the defects of the waterproof layer such as swelling and lifting by forming a waterproof layer which can be integrated with the concrete surface by using a polyurethane type waterproofing material having a relatively low defective ratio compared to other waterproofing materials. So in this study, the basic properties of polyurethane waterproof sheet reinforced with non-woven fabric are investigated in order to understand field applicability.