• Journal of the Korean Society of Clothing and Textiles
• /
• v.10 no.2
• /
• pp.59-67
• /
• 1986

To control the amounts of formaldehyde released from the cotton fabric finished with N-methylol compounds, glycerol was used as a formaldehyde-scavenging agent. It was observed the effects of catalysts and curing conditions when aftertreated with glycerol on melamine resin finished fabric. The effects of Different processes of glycerol treatment, and different resins, urea resin and melamine resin, were compared. The conclusions obtained from the results are as follows: 1) It was shown hatt the aftertreatment with glycerol (treated without catalyst) was more effective than treated with catalysts in controlling free formaldehyde. 2) The optimum curing temperature and curing time for the glycerol aftertreatment without adversely affecting the other properties of fabric was about $160^{\circ}C$, 3 min. 3) According to the increase of glycerol concentration in both aftertreatment and simultaneous treatment the amounts of free formaldehyde was reduced. The rate of decrease was manifest within the limits of $6\%$ in the case of simultaneous treatment with glycerol ana resins, and $3\%$ in the case of glycerol aftertreatment on resin finished fabrics. 4) Dry wrinkle recovery angle was decreased the increase of glycerol concentration. Melamine resin had a little adverse effect than urea resin, particulary glycerol aftertreatment. 5) The breaking strength was increased with the increase of glycerol concentration.

• Fashion & Textile Research Journal
• /
• v.10 no.4
• /
• pp.544-551
• /
• 2008

In this study, the colorants of Amur cork tree were extracted with boiling water. Chitosan crosslinked cotton fabrics have been dyed with aqueous extract of Amur cork tree and their dyeabilities on the fabrics were studied. Additionally the fastness to washing and light were also investigated. Cotton fabrics were treated with a crosslinking agent epichlorohydrin in the presence of chitosan to provide the cotton fabrics the dyeing properties of natural dye(Amur cork tree) by the chemical linking of chitosan to the cellulose structure. This process was applied by means of the conventional mercerizing process. The chitosan finishing and durable press finishing of the cotton fabrics occurred simultaneously in the mercerization bath. On the surface color change, the fabric of no-chitosan finished and no-mordanted has greenish yellow. The more crosslinked chitosan on cotton fabrics has the more turned down greenish on the surface color, as increasing the concentration of chitosan, greenish color turn down to the yellow close the 90o hue angle. In all sorts of fabrics, dyeability(K/S) is slightly affected by the number of manufacturing process and the concentration of chitosan. But only mercerized cotton fabric has higher dyeability (K/S) than mordant treated cotton fabrics. Wash fastness has little different results by each condition, but almost similar values. Light fastness was improved with chitosan treatment on cotton fabric.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.18 no.3
• /
• pp.327-338
• /
• 1994

KES-F system is widely used in hand evaluation, however, it has encountered some challenges, such as the overlapping of primary hand value, lack of predictability in case of women's thin dress, difficulties in communication due to complexity of primary hand expression and cultural differences in subjective evaluation. Therefore, this study was intended 1) to find out the Korean primary hand expressions(factors) of the overall concept of fabric hand associated with women's spring- fall dress fabrics, 2) to develope the fabric hand attributes of those fabrics and 3) to show whether there are any differences between Korean textile experts and non-experts in terms of the concept of fabric hand descriptors of hand attributes. Data base of hand descriptors were collected by extensive interview 60 experts and 10 non - experts using 110 spring-fall dress fabrics. Finally, hand of selected fabrics was assessed by 205 experts and 265 non-experts using 7-point scale of 26 descriptors based on the data base. Subjective ratings were analyzed by common factor analysis with varimax rotation. It was found that Korean primary hand expression indicated rather simple property, hence, did not equate exactly with Japanese experssion(e.g. koshi, shinayakasa, etc.) which contains several material properties. There were differences in stretch IE resilience, especially liveliness, between the judgement of non- ex- pert than to experts. Surface- related category was more important to non-experts than to experts. Slight differences were found between both groups in terms of preferred descriptors. Important descriptors as a rating scale were suggested.

• Journal of the Korean Home Economics Association
• /
• v.35 no.3
• /
• pp.275-286
• /
• 1997

The effects of water-and oil-repellent finishes on the surface characteristics of polyester fabrics were investigated in this study. Three kinds of fluoropolyment were selected as water=and oil-repellent finishing agents. The effects of water-and oil-repellent finishes were determined by the water repellency and oil repellency. The surface properties of untreated and treated polyester fabrics were evaluated with respects to crease resistance, contact angle and wicking time. The results of this study were as follows: 1. The polyester fabrics treated with fluoropolymers showed much higher water repellency and oil repellency than those of untreated polyester fabrics. Water-and oil-repellency of fabrics were increased with the crystallinity and the hydrophobic-hydrophillic components of fluoropolymers. 2. Water repellency of fabrics treated with fluoropolymer with hydrophobic components was the highest. Oil repellency of fabrics treated with fluoropolymer with high crystallinity was the highest. Water-and oil-repellency of fabrics treated with fluoropolymer with hydrophyllic components was low comparatively. 3. The crease resistance of polyester fabrics treated with fluoropolymer nearly approached to that of untreated polyester fabric. 4. The water-and oil-repellent finishes improved contact angle markedly. Especially the contact angle of ployester fabric treated with fluropolymer with hydrophobic component was the biggest. 5. The wicking time of polyester fabric treated with fluropolymer with hydrophobic component was the longest.

• Korean Journal of Materials Research
• /
• v.28 no.1
• /
• pp.24-31
• /
• 2018

This study reports an environment-friendly synthetic strategy to process nickel oxide nanocrystals. A mesoporous nickel oxide nanostructure was synthesized using an environmentally benign biomimetic method. We used a natural rambutan peel waste resource as a raw material to ligate nickel ions to form nickel-ellagate complexes. The direct decomposition of the obtained complexes at $700^{\circ}C$, $900^{\circ}C$ and $1100^{\circ}C$ in a static air atmosphere resulted in mesoporous nickel oxide nanostructures. The formation of columnar mesoporous NiO with a concentric stacked doughnuts architecture was purely dependent on the suitable direct decomposition temperature at $1100^{\circ}C$ when the synthesis was carried out. The prepared NiO nanocrystals were coated on cotton fabric and their antibacterial activity was also analyzed. The NiO nanoparticle-treated cotton fabric exhibited good antibacterial and wash durability performance.

• Journal of Fashion Business
• /
• v.14 no.5
• /
• pp.102-111
• /
• 2010

The pegging board planning for jacquard weaves was carried out to express a big enough design in 60 inch width. 20 Kinds of fabrics were fabricated by a jacquard loom with a warp density of 168 yarns/inch, a weft density of 100T, and a weight of 180-220g/$m^2$ or 250-300g/$m^2$. The result of sanitary test about Escherichia coli, Staphilococcus aureus, Klebsiella pneumoniae and Salmonella typhimurium showed a sterilizing power of over 90% after cultivating for 30, 60, 120 minutes. And also its property was sustained after laundrying 20 times. The flame retardant properties showed a good result and complied with the flame retardant criteria of KOFEI 1001. Abrasion, laundry and light fastnesses of flame retardant fabrics showed 4-5 grades. The fabrics manufactured from 30's fiber appeared a little fluff and pill on the fabric. Therefore, they need a shearing process after finishing all processes to decrease the fluff or pill on the fabric. The flame retardant fabric manufactured from 30's and 40's fiber showed increased strength and elongation after soaping and dyeing finishing because the fabrics were shrunk.

• Journal of Fashion Business
• /
• v.11 no.6
• /
• pp.52-61
• /
• 2007

To increase the ultraviolet radiation (UVR) protection of cotton fabric, ultraviolet protection (UVP) materials were treated onto cotton fabric using a new technique, UV-curing. A photocrosslinkablepolymer, poly(ethylene glycol) dimethacrylate was used as a UV-curable resin in the presence of a small amount of photoinitiator. Two kinds of UVP materials were used, UV-absorber, 2,2'-dihydroxy-4-methoxy benzophenone, and UV-scatterer, $TiO_2/ZnO$ Pad-dry-cure method in employing these materials onto cotton was also conducted to compare the effectiveness and the washfastness of UVP treatment between curing methods. UVP treated cotton fabric showed a moderate increase in UVP in case of 2,2'-dihydroxy-4-methoxy benzophenone treatment and a high increase in case of $TiO_2/ZnO$. UV-curing method increased the washfastness of UVP property of $TiO_2/ZnO$ treated cotton fabrics. However, in case of 2,2'-dihydroxy-4-methoxy benzophenone, similar wash fastnesses of UV-cured and pad-dry-cured cotton were observed. It can be presumed that 2,2'-dihydroxy-4-methoxy benzophenone was not significantly affected by water since its hydrophobicity. In short, UV-curing of UVP materials onto cotton was successfully done, and treated cotton fabrics showed the increased UVP properties and an increased washfastness in some extent.

• Korean Journal of Materials Research
• /
• v.4 no.3
• /
• pp.339-348
• /
• 1994

The study has been conducted to know ablation microstructures and characteristics in carbon /phenolic composites. Ablation properties depend on mole fraction of $H_2O$ and $C0_2$ gas which were produced by reaction between propellant and oxidizer. However, the results of this study shown that the ablation also depended on weaving structure, density of fabric, and tow size of carbon fiber. 3K 8HS fabric showed superior ablation resistance to others, 3K twill and 12K 8HS fabric structures.

• Textile Coloration and Finishing
• /
• v.8 no.1
• /
• pp.15-25
• /
• 1996

Wool fabric and merino wool top were dyed with two dyes, C.I. Acid Red 13 and C.I. Direct Blue 1 in presence of hydrogen peroxide/glyoxal redox system at various conditions such as dyeing time, temperature and redox concentration. The pH of dye bath was 4.5 in buffer solution of $KH_{2}PO_{4}$ (0.1mol/1)/$Na_{2}HPO_{4}$ (0.1mol/1). Also dyeing of cotton fabric was carried out with C.I. Direct Blue 1 in absence or presence of redox system. The color depth(K/S) increased with redox concentration and dyeing temperature. The increases in dyeing rate and equilibrium dye exhaustion of Acid Acid 13 and Direct Blue 1 on wool fiber and fabric in the present of hydrogen peroxide/glyoxal have been caused by decreasing in pH value during dyeing process which due to the decomposition of hydrogen ion in glyoxal with the assistance of hydrogen peroxide. But the decreases in exhaustion of Direct Blue 1 on cotton may be attributed to repulsive interac ion between salt and salt.

• Journal of Fashion Business
• /
• v.7 no.3
• /
• pp.60-70
• /
• 2003

Textile scientists have regarded the material appearance of natural fibers, especially that of silk or wool fibers, as the benchmark for reinventing the look and feel of the long term, friendly companion of mankind. The appearances or textures of the materials surrounding us in everyday life have long been interesting topics to many people.from scholars to painters. Even the simplest questions may require careful pondering. Why is the silk fabric so lustrous with subtlety? Recently, appearance models have become increasingly important in textile products. They are needed to model and simulate different models. In this study, the optical characteristics of filament yarns and knitted fabrics were investigated using images taken at various angles and illumination conditions. Then the images were analyzed using some image analysis techniques, such as thresholding and measuring luster blobs. The anisotropic nature of the filamentous specimens was studied based on the images acquired at different incident illumination and observing angles with several alignment positions of the fabric specimens. A few cylindrical models were generated using commercially available software, Rhinoceros, and then on the models, a ray-tracing algorithm based on a software, POV-Ray, was applied to simulate the appearance or lustrous images of the monofilament models.