• Journal of the Korean Society of Clothing and Textiles
• /
• v.41 no.1
• /
• pp.28-42
• /
• 2017

Moisture transfer characteristics of high emotional garments are important to evaluate wear comfort. Wicking and drying measurement methods are also critical for perspiration absorption and quick dry fabric made of high functional fibers. In this study, the wicking and drying properties of high emotional fabrics made from hybrid composite yarns using CoolMax, Tencel, Bamboo staple fibers and PP. PET CoolMax filaments were also measured and analyzed according to various measuring methods. The wicking property of hybrid composite yarn fabrics by Bireck method was mostly influenced by the structure of hybrid yarns than the absorption rate of constituent fibers; however, both the hygroscopicity of fibers and the composite yarn structure affected the wicking property of the fabrics in the drop method. Concerning drying properties, the KSK 0815B method measuring distilled moisture weight was more relevant to explain the drying characteristics of hybrid yarn fabrics than the KSK 0815A method measuring the time to drying. This study revealed that the drying properties of hybrid yarn fabrics were influenced by the hygroscopicity of constituent fibers, wicking properties of constituent yarns and structure of composite yarns.

• International Journal of Railway
• /
• v.1 no.3
• /
• pp.113-116
• /
• 2008

The long-tenn exposure of polymeric composite materials to extreme-use environments, such as pressure, temperature, moisture, and load cycles, results in changes in the original properties of the material. In this study, the effect of combined environmental factors such as ultraviolet ray, high temperature and high moisture on mechanical and thermal analysis properties of glass fabric and phenolic composites are evaluated through a 2.5 KW accelerated environmental aging tester. The environmental factors such as temperature, moisture and ultraviolet ray applied of specimens. A xenon-arc lamp is utilized for ultraviolet light and exposure time of up to 3000 hours are applied. Several types of specimens - tensile, bending, and shear specimens that are warp direction and fill direction are used to investigate the effects of environmental factors on mechanical properties of the composites. Mechanical degradations for tensile, bending and shear properties are evaluated through a Universal Testing Machine (UTM). Also, storage shear modulus, loss shear modulus and tan a are measured as a function of exposure time through a Dynamic Mechanical Analyzer (DMA). From the experimental results, changes in material properties of glass fabric and phenolic composites are shown to be slightly degraded due to combined environmental effects.

• Textile Coloration and Finishing
• /
• v.4 no.3
• /
• pp.74-81
• /
• 1992

Chemical bonded nonwoven fabric for apparel use and spunlaced nonwoven fabric for medical use were finished for soil resistance and blood replellency with fluorochemicals utilizing foam finishing technology (FFT) and conventional padding application techniques. The FFT process improved soil and abrasion resistance properties of nonwoven fabrics compared with the conventional padding process. Excellent water-oil-saline-alcohol repellency values and water impact penetration values were obtained in the spunlaced nonwoven fabrics with both techniques.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.23 no.1
• /
• pp.14-21
• /
• 1999

The Tencel fabrics were treated with bio-softness finish to improve softness. The change of the properties depending on the softner as well as cellulase treatment was investigated. The relative activity of cellulase for tencel was maximum ap pH 4-4.3 cellulase concentration 14-16% (o. w .f) treatment time 4 hour and liquor ratio 100: 1 The treatment of epoxy silicon softner improved in pilling whiteness dye absorption of Tencel fabric.

• Textile Coloration and Finishing
• /
• v.18 no.1
• /
• pp.33-43
• /
• 2006

The purpose of this study was to eximine the effect of different yam twisting methods on mechanical properties and 3D CAD images of plain knitted fabrics made of composite yarns. Six yams were used in this study: four different composite yams of the six consist of acetate and functional polyester (Poly-m) with the ratio of 70:30, and the rest two are the original acetate $100\%$ yam and the poly-m $100\%$ yarn. The four kinds of composite yarns were processed in combinations of twisting processes such as interlacing, false twisting, two for one twisting, combined twisting and single covering, and the two original yams were knitted without any twisting process. Sixteen mechanical properties of all the six knitted fabrics, knitted under the same knitting conditions, were measured by KES-FB system with the outer knit condition. The results were as follows; 1) When the sample applied with the false twisting process at the temperature as high as $220^{\circ}C$, ENT, B, HB, G and RC values of samples increased which leads to increasing dimensional stability. 2) To gain the high bending and shear properties in the single covering process, selecting the core yarn with such properties is the most important factor. 3) Interlacing process effected to increase RC value. 4) False twisting process after interlacing process gave bulkiness and un-interlaced part in yam was increased SMD value. The SMD value of the kilted fabric of the composite yarn, which was put through the combined twist process, was higher than those of which simple process such as the two for one twist or the single covering process applied. In order to achieve the silk-like surface feel of knitted fabric, the sin91e covering process is recommended. 5) Examining the simulation images of the knifed fabrics of composite yarn, which were generated by the 3D CAD system based on the mechanical properties of the fabric, led that appearance could be changed as different twisting methods were applied.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.41 no.2
• /
• pp.352-361
• /
• 2017

This study prepared 5 retroreflective fabrics of glass beads and colors of silver, gold and purple in order to characterize morphologies, luminance and illuminance properties. Retroreflective fabrics were prepared according to division and area by Samp.1 (Division 2, area $80cm^2$), Samp.2 (Division 2, area $60cm^2$), Samp.3(Division 3, area $60cm^2$), Samp.4 (Division 5, area $50cm^2$), and Samp.5 (Division 1, area $100cm^2$). The results of the morphologies indicate that the back side of retroreflective fabrics was the 3M-Sv, RF-Sv. The RF-Gd of the fabrics were woven fabrics and the SRF-Sv, SRF-Pp was knitting. The largest glass bead size was 3M-Sv and the smallest was SRF-Pp. RF-Sv was the thinnest and SRF-Sv, SRF-Pp were the thickest. The results of luminance properties indicated a tendency to decrease slightly as the number of divisions and area increased, except for Samp.2 to Samp.3. The result of illuminance properties tend to increase as the number of LED becomes greater than the number of divisions in the same area; in addition, the higher the luminance as a whole increases. The results show that it is preferable to use a silver-colored RF-Sv which has the highest luminance and physical properties when a retroreflective fabric is applied to clothes.

• The Research Journal of the Costume Culture
• /
• v.25 no.6
• /
• pp.880-892
• /
• 2017

In this study, the appearance change and the heat moisture transfer properties of knitted fabric by yarn shrinkage were examined to obtain useful data on the development of thermo-sensitive functional materials. Eleven types of knitted fabric were knitted using highly bulky acrylic-blended yarn. After shrinking the specimens using dry heat treatment, the appearance change and thickness were measured. An HEC simulator was adopted for measuring the heat moisture transfer properties of specimens by yarn shrinkage. When holes were arranged vertically in the mesh structure, the specimens with 2,500 and 5,000 holes showed high percent change of hole area, appearance, and thickness. When holes were diagonally arranged in the mesh structure, the percent change of hole area in the specimen with 1,250 holes was larger than the one with 2,500 holes. However, the dimensional stability of the specimen with 2,500 holes was better because of its smaller appearance and thickness change. In the tuck structure, the percent change of hole area in the specimen with 625 and 416 holes was relatively large compared with the appearance and thickness change. Furthermore, the hole size in the tuck structure was smaller than that in the mesh structure but the percent change of hole area was larger. Therefore, it was proved that the tuck structure is more suitable than the mesh structure for developing thermo-sensitive functional materials. Heat moisture transfer property test verified that the change of hole area by yarn shrinkage enabled obtaining the thermal effect due to the distinct temperature difference in the inner layer.

• Fashion & Textile Research Journal
• /
• v.25 no.3
• /
• pp.386-397
• /
• 2023

In this study, the efficacy of ultrasonic washing in cotton and wool fabrics was compared and evaluated against conventional washing in terms of cleaning properties and fabric deformation. Factors such as washing temperature, time, liquid ratio, and detergent concentration were kept varied, and the cleaning properties of sebum-soiled fabrics were assessed using different detergents such as alcohol ethoxylate, linear alkylbenzenesulfonate, and IEC 60456 Reference Detergent A^*. In addition, the effects and emulsification power of enzymes and oxygen bleach were examined. To compare the cleaning properties with general washing, a launder-O-meter was used. To investigate fabric deformation during the washing process, the loosening test cloth, shrinkage test cloth, and mechanical strength test cloth were compared between ultrasonic washing machines and household drum washing machines. The results indicate that ultrasonic washing exhibits superior cleaning properties than launder-O-meter when the temperature is low and the washing time is short. Furthermore, there is less deformation and damage during the washing process. It was also observed that the activity of the detergent increases when ultrasonic waves are applied to the washing process. Considering the increasing tendency to pursue convenience and simplicity in clothing management as well as the anticipated commercialization of smart clothing with built-in electric circuits, ultrasonic laundry could serve as a new alternative to existing laundry methods.

• Architectural research
• /
• v.18 no.1
• /
• pp.31-38
• /
• 2016

The surface design in architecture plays a role as an indicator that symbolizes cultures and styles, in accordance with the course of history and the standards of the time. The surface design that determines the facade of an architectural structure allows us to have a more clear understanding about the functions, programs and structures, as well as the periodical concept of the architects than any other components of the architecture. The purpose of this paper was to examine how architectural surface designs were realized, using commonly-used materials. This study provides meaningful implications, in that it suggests common features in terms of design methodologies (between architecture and non-architecture fields), and presented new possibilities for contemporary architectural surface designs through the classification of building system methods depending on fabric properties, and through the case study analysis of architectural surface designs; in addition, the results of this study could be utilized as basic data for future studies on the possibility of the expression of surface designs across a broader domain.

• Textile Coloration and Finishing
• /
• v.13 no.3
• /
• pp.155-164
• /
• 2001

Textile wet-processing industry usually five rise to environmental pollution problems caused by using chemical substance. The objective of this study is to apply enzymes for wool and reduce the environmental problems. Three commercial protein degradation enzymes and a cellulose degradation enzyme as a reference were treated to prevent the shrinkage of wool fabric on laundering. Shrink resistant effects used change with the kinds of enzyme, the amount of enzyme, assistant chemicals, and the pre-treatment condition of wool fabric. When pre-treated with corona before enzyme treatment under ultrasonic condition, the weight loss was increased and strength was decreased and elongation was increased. Both corona pre-treatment and the addition of $Na_2SO_4$ also decreased shrinkage of wool fabrics on laundering. The existence of assistant chemicals increased alkali solubility of wool fabrics.