• The Journal of Engineering Geology
• /
• v.24 no.3
• /
• pp.363-372
• /
• 2014

Granite rock is reported to have three orthogonal anistoropic planes i.e., rift, grain induced by microcrack characteristics and mineral arrangement. We investigated the influence of thus fabric anisotropy in granite on elastic wave properties using free-free resonance test to obtain unconstrained compression wave velocity, shear velocity, Poisson ratio and damping ratio. As a result, Rod wave velocity is more dependent on anisotropy of granite due to microcrack distribution than shear wave velocity. In addition, anisotropy of Poisson ratio and damping ratio is also observed with respect to three anisotropic planes.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.33 no.7
• /
• pp.1121-1127
• /
• 2009

This study presents an eco-friendly and one-step finishing method for modifying fiber property that reduces fiber damage in wool/polyester blend fabrics. Lipase from aspergillus oryzae is used in this experiment. The enzymatic treatment condition is optimized by measuring the relative activity of lipase depending on pH level, temperature, concentration of lipase, and treatment time. The concentration of $CaCl_2$as an activator is determined by the characteristics including whiteness, water contact angle (WCA), and dyeing property. The modified properties of lipase treated fabrics are tested for pill resistance and surface morphology. The results are described as follows: the optimum condions for lipase treatment constitute a pH level of 8.0, treatment temperature of 40$^{\circ}$$_C$, concentration of lipase at 100% (o.w.f), and a treatment time of 90 minutes. $CaCl_2$helps in raising lipase activation, and the optimum concentration is 50mM. The whiteness, wet ability, and pill resistance of lipase treated fabrics improves as compared to the control. The dyeing property of lipase treated fabrics improved by 53.5% after using the one-bath dyeing method. This means that lipase treatment can save time and cost during the dyeing process since lipase treatment modifies wool and polyester fibers. The surface of lipase treated wool fibers do not exhibit any change, however voids and cracks manifest on the surface of lipase treated polyester fibers.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.34 no.11
• /
• pp.1767-1778
• /
• 2010

This study investigates applying $TiO_2$ (titanium dioxide) nanoparticles to polypropylene nonwoven fabrics via electrospinning for the development of UV-protective materials. To fabricate uniform nanocomposite fibers, three types of $TiO_2$ nanoparticles were applied: powder, colloid, and $TiO_2$ coated polymer pellets. $TiO_2$/polyurethane (PU) and $TiO_2$/poly(vinyl alcohol) (PVA) nanocomposite fibers were electrospun and the morphology was examined using a field-emission scanning electron microscope and a transmission electron microscope. Layered fabric systems with electrospun $TiO_2$ nanocomposite fiber webs were developed at various concentrations of $TiO_2$ in a range of the web area density. The effects of $TiO_2$ concentration and web area density on UV-protective properties were examined. When $TiO_2$ colloid was added into a PVA polymer solution, uniform nanocomposite fiber webs in which $TiO_2$ particles were evenly dispersed were produced. Water-soluble PVA nanofiber webs were given a heat treatment to stabilize the electrospun PVA fibrous structure against dissolution in water. $TiO_2$/PVA nanoeomposite fiber webs with 2wt% $TiO_2$ and 3.0g/$m^2$ web area density exhibited an ultraviolet protection factor of greater than 50, indicating excellent UV protection.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.34 no.3
• /
• pp.393-400
• /
• 2010

This study examines the mordanting effect and multi functional properties of silk fabrics dyed with onion shell extracts that were mordanted with gallnut. The contents of this study are as follows. First, the optimum dyeing conditions were investigated by measuring the K/S value that depended the on dyeing conditions when silk fabrics were dyed with onion shell extracts. Second, the color, brightness, and chroma differences that appear after mordanting with gallnut were investigated by measuring the K/S and Munsell value. Third, the color fastness and antimicrobial activity were measured. When silk fabrics were dyed with onion shell extracts, the optimum dyeing conditions were a dyeing temperature of $70^{\circ}C$, a dyeing concentration of 160%, and a dyeing of time 30min. After mordanting with gallnut extracts, the K/S value increased remarkably and was larger in pre-mordanting than post-mordanting. The H value displayed yellow-red in all cases of pre and post mordanting. However, the H value was more reddish in the order of non-mordanting

• Journal of Sericultural and Entomological Science
• /
• v.29 no.2
• /
• pp.58-66
• /
• 1987

This study was investigated on the effect of degumming of cocoon shell, raw silk yarn and grey silk crepe by use of Papain, comparing with soap, soda and soap-soda. The obtained results may be summarized as follows : 1. Degumming loss, when the pretreatment was done, was completed by Papain more than by alkali. 2. Lousiness result of Papain degummed silk yarn was apt to be improved more than that of alkali degummed one. 3. As a result of tensile property test, elasticity and resilience of Papain degummed crepe were good compared to those of alkali degummed one. 4. Not only bending rigidity of Papain degummed crepe was reduced more than that of alkali degummed one but also hysteresis of bending moment was decreased in papain degummed crepe. 5. Handle of Papain degummed crepe was superior to that of alkali degummed one.

• Proceedings of the Korean Society of Dyers and Finishers Conference
• /
• 2011.03a
• /
• pp.52-52
• /
• 2011

나노필라멘트는 단면직경이 수백 나노미터에서 수십 나노미터 수준인 초극세 장섬유를 말하며, 해도형 복합방사로 얻어진 섬유를 알칼리 감량을 통해 해성분을 용출하여 도성분에 해당하는 나노필라멘트를 얻는다. 이러한 나노필라멘트사는 초극세와 마찬가지로 단위중량당 표면적이 크고, 작은 굴곡반경 및 낮은 굴곡 반발성으로 인하여 일반 합성섬유에 비하여 고가성 및 새로운 기능성을 부여하는 제품에 응용 될 수 있다. 특히 나노필라멘트를 이용한 편물제품으로 경편물은 wiping cloth 등 산업용도에 적용되며, 환편물은 인조피혁 등 의류용으로 사용된다. 나노필라멘트 편물은 원사섬도, 편물의 조직, 밀도 및 중량 등에 따라 분할율과 용출 특성이 상이하므로 후가공 공정에 있어서 감량공정은 매우 중요하다. 또한 나노필라멘트와 같은 세사의 경우 일반사보다 비표면적이 증가하여 동일한 염색조건에서 옅은 색상을 나타낸다. 이로 인해 같은 색상을 위하여 보다 많은 염료를 투입해야 하며, 결과적으로 견뢰도 문제가 발생할 우려가 있다. 이 연구에서는 해도형 나노필라멘트 PET 원사와 일반 PET사를 복합한 2종의 편물을 이용하여 알칼리감량특성 및 3가지 분산염료에 대한 염색성과 견뢰도를 조사하였다. 알칼리 처리조건에 따른 감량률을 측정함으로써 각 편물의 이론 감량률에 도달하는 지점을 확인하고, SEM사진 분석을 통하여 해도사의 감량정도 및 분할특성을 확인하였다. 나노필라멘트 편성물은 염료농도가 증가함에 따라 지속적으로 K/S 값이 증가하였으나, 전체적으로 낮은 K/S값을 얻었다. 또한 염색온도가 110에서 $100^{\circ}C$로 증가함에 따라 K/S값이 감소하였는데, 이는 고온에서 분산염료가 나노필라멘트로부터 일반 PET사로 이염이 더 많이 발생하였기 때문이라고 생각된다. 세탁견뢰도의 경우 양호 또는 우수하였으나, 일광견뢰도의 경우 1등급으로 매우 낮아 이를 개선하기 위한 노력이 향후 진행되어야 할 것이다.

• Proceedings of the Korean Society of Dyers and Finishers Conference
• /
• 2011.03a
• /
• pp.60-60
• /
• 2011

막구조는 근래에 와서 대공간 구조 및 지붕구조에 가장 보편적으로 사용되는 경량 인장 구조물로 각광받고 있다. 구조용 막재는 풍하중 및 설하중에 충분히 감당할 수 있도록 강도와 내구성을 가지고 있어야 한다. 일반적으로 막구조 재는 PVC코팅 폴리에스터막, 실리콘코팅 유리섬유막, PTFE코팅 유리섬유막이 있다. 제직되는 원단의 크기가 한정되어 있기 때문에 재단 후 접착하여 제작한다. 이 때문에 이음부분이 나 재단부분에 코팅으로 인한 접착이 어려워 고온고압으로 접착을 한다. 이 연구에서는 실리콘코팅 유리섬유막의 접착시 어려움을 보완하기 위해 저온 Plasma를 이용한 처리법으로 방전에 의해 Plasma를 발생시켜 50w, 100w 출력으로 10분, 20분간 처리하여 그 결과를 접촉각과 SEM 관찰을 통해 표면처리를 관찰하였다. Plasma 처리로 인해 실리콘 표면층에 균열이 발생하고 표면이 갈라짐을 확인할 수 있었다. 접촉각측정 결과 Plasma 출력과 시간의 증가함에 따라 접촉각은 감소하였다. 실리콘코팅 원단에 저온 Plasma 처리한 후 표면 특성을 분석하고 원단을 접착을 시켜 박리 강도를 측정함으로써 막구조 원단의 접착력 향상에 대한 연구를 진행하였다. KS K 0533 접착포의 박리 강도 시험방법으로 실리콘코팅 원단의 박리 강도를 측정한 결과 플라즈마 처리 원단이 플라즈마 미처리 원단보다 박리 강도가 향상된 것을 확인할 수 있었다. 저온 Plasma 처리 시간이 증가할수록 표면의 젖음성을 향상시켜 접촉각을 낮추었다. 이는 곧 표면에너지의 증가를 뜻하는 것으로 접착력을 증가시켜 실리콘코팅 원단의 접착성을 시킴으로써 강한 강도와 내구성을 갖춘 막구조물의 개발에 기대되고 있다.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.12 no.3
• /
• pp.93-103
• /
• 2010

The results of comparison and analysis of dynamical features according to Jacquard structure are as follows. Regarding elongation(E) value in tensile property, the value in the direction of course was found to be larger in all Jacquard structure, except floating Jacquard, than the direction of wale. It could be found that, as to bending strength(B) in Bending Property, the value of bending strength in the direction of course smaller in all the textile(structure) except floating than the direction of wale, so that the ability of curve formation is excellent. And in case of floating Jacquard, it showed the smallest value in the direction of course and wale, so that it was interpreted as Jacquard having a soft feel. Blister Jacquard showed the highest value in both directions of course and wale, so that it was evaluated as Jacquard having the hardest touch. With regard to shearing character(G) and shearing hysteresis(2HG) in Shearing Property, Jacquard indicated the lowest value, so it was evaluated as the textile(structure) having high drape the transformation of whose fabric is easy. In addition, normal Jacquard, transfer Jacquard, blister Jacquard showed a high value, so that it could be known they are Jacquards having stiff touch. The study implies that normal Jacquard, bird's eye Jacquard, etc., which well stretch in the direction of a course like tubular Jacquard course, is better to make the margin a little shorter than the basic margin, and Jacquard that well stretches in the direction of wale like ladder's back Jacquard and floating Jacquard is better to make the margin longer and the length shorter than the basic margin.

• Proceedings of the Korean Society of Dyers and Finishers Conference
• /
• 2012.03a
• /
• pp.27-27
• /
• 2012

나노필라멘트는 단면직경이 수백 나노미터에서 수십 나노미터 수준인 초극세 장섬유를 말하며, 해도형 복합방사로 얻어진 섬유를 알칼리 감량을 통해 해성분을 용출하여 도성분에 해당하는 나노필라멘트를 얻는다. 이러한 나노필라멘트사는 극세사와 마찬가지로 단위중량당 표면적이 크고, 작은 굴곡반경 및 낮은 굴곡 반발성으로 인하여 일반 합성섬유에 비하여 고가성 및 새로운 기능성을 부여하는 제품에 응용될 수 있다. 나노필라멘트 편물은 원사섬도, 편물의 조직, 밀도 및 중량 등에 따라 분할율과 용출 특성이 상이하므로 후가공 공정에 있어서 감량공정은 매우 중요하다. 또한 나노필라멘트와 같은 세사의 경우 일반사보다 비표면적이 증가하여 동일한 염색조건에서 옅은 색상을 나타낸다. 이로 인해 같은 색상을 위하여 보다 많은 염료를 투입해야 하며, 결과적으로 견뢰도 문제가 발생할 우려가 있다. 이 연구에서는 800nm급 해도형 나노필라멘트 PET 100% 또는 나노필라멘트와 일반 PET사를 복합한 편물을 이용하여 알칼리 감량거동 및 분산염료에 대한 염색성과 견뢰도를 연구하였다. 알칼리 감량이 진행됨에 따라 감량률이 증가하였으며, SEM분석, DSC분석, 양이온염료 염색법 등을 통하여 해성분 용출 및 도성분 분할이 진행되는 정도를 평가할 수 있었다. 나노필라멘트 편성물은 염료농도가 증가함에 따라 지속적으로 K/S값이 증가하였으나, 일반 극세사 편성물에 비해 낮은 K/S값을 얻었다. 또한 나노필라멘트/일반 PET 복합편물에 있어서 염색온도가 110에서 $130^{\circ}C$로 증가함에 따라 K/S값이 감소하였는데, 이는 고온에서 분산염료가 나노필라멘트로부터 일반 PET사로 이염이 더 많이 발생하였기 때문이라고 생각된다. 세탁견뢰도의 경우 양호하였으나, 일광견뢰도의 경우 1등급으로 매우 낮았다.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.11 no.3
• /
• pp.135-141
• /
• 2009

In this paper, Tagetes extracts were extracted from leave, root, stem and flower at $100^{\circ}C$ for 20 minutes. Silk fabrics were dyed with Tatetes Patula L. to investigate the dyeing properties in accordance with dye concentration, pH, temperature, time of pre-, simul- and post-treatment of mordants using the three types of mordants. As a result, the surface color of the silk fabrics was yellowish regardless of the types of mordants. However, the a values were decreased and b values were increased in the order of the dyeing using Al>Cu>Fe: Al mordanted silk fabrics were appeared in greenish yellow and Fe mordanted silk fabrics were done in redish yellow. K/S values of the silk fabrics treated with Fe mordant were 3 times higher than those of Al and Cu mordants according to the increase in dye concentration. This behaviour was shown even in the increase of mordant concentration due to the interaction of mordant and pigments of Tatetes Patula L. But, the types of mordants did not affect because the equilibrium was obtained in 20 minutes in a similar way. And it showed that the highest K/S value of the silk fabrics studied was pH 4 and $80^{\circ}C$ regardless of the types of mordants.