• 한국산업융합학회 논문집
• /
• 제25권5호
• /
• pp.899-908
• /
• 2022

In this study, a study was conducted to localize a large aluminum turbo fan used for tank powerpack. The turbo fan was scanned with a 3D scanner and then 3D modeling was performed. Computational fluid dynamics (CFD) were performed from the performance conditions of the fan, and structural analysis was performed using the pressure data obtained from CFD. The fan was reduced to 1/5 size by applying the geometric similarity. A 1/5 size fan has a honeycomb structure inserted into the front shroud and back shroud to reduce the weight by 5.3%. A 1/5 size fan was printed using a PBF 3D printer, and a 1/5 size fan with honeycombs was also printed. The pressure drop of 8.67 kPa and the required power of 138.19 kW, which satisfies the performance conditions of the fan, were confirmed from the results of CFD. The values of the maximum deformation amount of 0.000788 mm and the maximum effective stress of 0.241 MPa were confirmed from the structural analysis results. The fan printed by the PBF 3D printer had the same shape as the modeling, and the shape was perfect. There are no defects anywhere in appearance. However, the condition of the outer surface of the fan's back shroud is rough compared to other locations. The fan in which the honeycomb was inserted was also perfectly output, and the shape of the honeycomb was the same as the modeling.

• 한국결정성장학회지
• /
• 제19권2호
• /
• pp.61-65
• /
• 2009

본 논문에서는 형광체가 없는 백색 LED의 성장과 광학적인 특성을 분석하였다. 혼합소스(miked-source) HVPE(hydride vapor phase epitaxy) 방법과 다중성장보트를 이용하여 MOCVD로 얇게 성장한 n-GaN 위에 활성층을 AlGaN으로 한 이종접합구조(DH; Doublehetero structure)를 성장하고, 패키징 단계를 거쳐 비형광체 단일칩 백색 LED 램프를 제작하였다. 패키징 한 소자를 주입전류 $10{\sim}100mA$로 변화시켜 측정한 결과 색 연색성 값은 72-93, 색좌표의 좌표값은 X값은 $0.26{\sim}0.34$, Y값은 $0.31{\sim}0.40$에서 가지며, 색온도는 $5126{\sim}10406K$ 범위에서 측정되었다. 또한 주입전류 증가 시, 형광체를 사용한 백색 LED는 청색 영역으로 이동하지만, 제작된 백색 LED는 황색영역으로 색좌표가 이동하였다. 이러한 특성을 통하여 고감도의 색 연색성 값을 가지는 비형광체 백색LED의 성장 가능성을 확인하였으며, 광 특성 분석 결과를 통하여 혼합소스의 성장 메커니즘을 제안하고자 한다.

• The Plant Pathology Journal
• /
• 제35권4호
• /
• pp.351-361
• /
• 2019

In our previous study, pyrrolnitrin produced in Pseudomonas chlororaphis G05 plays more critical role in suppression of mycelial growth of some fungal pathogens that cause plant diseases in agriculture. Although some regulators for pyrrolnitrin biosynthesis were identified, the pyrrolnitrin regulation pathway was not fully constructed. During our screening novel regulator candidates, we obtained a white conjugant G05W02 while transposon mutagenesis was carried out between a fusion mutant $G05{\Delta}phz{\Delta}prn::lacZ$ and E. coli S17-1 (pUT/mini-Tn5Kan). By cloning and sequencing of the transposon-flanking DNA fragment, we found that a vfr gene in the conjugant G05W02 was disrupted with mini-Tn5Kan. In one other previous study on P. fluorescens, however, it was reported that the deletion of the vfr caused increased production of pyrrolnitrin and other antifungal metabolites. To confirm its regulatory function, we constructed the vfr-knockout mutant $G05{\Delta}vfr$ and $G05{\Delta}phz{\Delta}prn::lacZ{\Delta}vfr$. By quantifying ${\beta}-galactosidase$ activities, we found that deletion of the vfr decreased the prn operon expression dramatically. Meanwhile, by quantifying pyrrolnitrin production in the mutant $G05{\Delta}vfr$, we found that deficiency of the Vfr caused decreased pyrrolnitrin production. However, production of phenazine-1-carboxylic acid was same to that in the wild-type strain G05. Taken together, Vfr is required for pyrrolnitrin but not for phenazine-1-carboxylic acid biosynthesis in P. chlororaphis G05.

• 한국재료학회지
• /
• 제15권3호
• /
• pp.161-165
• /
• 2005

We investigated selective dry etching of GaAs over AlGaAs and InGaP in high density planar inductively coupled $BCl_3/SF_6$ plasmas. The process parameters were ICP source power (0-500 W), RE chuck power (0-30W) and gas composition $(60-100\%\;BCl_3\;in\;BCl_3/SF_6)$. The process results were characterized in terms of etch rate, selectivities of GaAs over AlGaAs and InGaP, surface morphology, surface roughness and residues after etching. $BCl_3/SF_6$ selective etching of GaAs showed quite good results in this study. Selectivities of GaAs $(GaAs:AlGaAs\~36:1,\;GaAs:InGaP\~45:1)$ were superior at $18BCl_3/2SF_6$, 20 W RF chuck power, 300 W ICP source power and 7.5 mTorr. Addition of $(5-15\%)SF_6\;to\;BCl_3$ produced relatively high selectivities of GaAs over AlGaAs and InGaP during etching due to decrease of etch rates of AlGaAs and InGaP (boiling points of etch products: $AlF_3\~1300^{\circ}C,\;InF_3>1200^{\circ}C$ at atmosphere) at the condition. SEM and AFM data showed slightly sloped sidewall and somewhat rough surface$(RMS\~9nm)$. XPS study on the surface of processed GaAs proved a very clean surface after dry etching. It shows that planar inductively coupled $BCl_3/SF_6$ plasmas could be a good candidate for selective dry etching of GaAs over AlGaAs and InGaP.

• 한국수정란이식학회지
• /
• 제10권1호
• /
• pp.65-72
• /
• 1995

The purposes of this study were to produce cloned rabbit embryos and offsprings by nuclear transplantation(NT) using in vitro matured oocytes as nuclear recipient cytoplasm and to determine the effect of frozen nuclei donor embryos on the production efficiency of cloned embryos. The 8cell embryos were collected from the mated does by flushing oviducts with Dulbecco's phosphate buffered saline containing 10% fetal calf serum(FCS) at 40 hours after hGG injection. A portion of collected embryos were preserved at 4$^{\circ}C$ for 24 hours and a portion of them were frozen by vitrification method. The embryos used for donor nuclei were synchronized in the phase of Gi /S transition. The in vitro matured oocytes were used as recipient cytoplasm following removing the nucleus and the first polar body. The synchronized blastomeres from fresh, cooled or frozen embryos were injected into the enucleated oocytes by micromanipulation and were electrofused by electrical stimulation of three pulses for 60 $\mu$sec at 1.0 W /cm in 0.28 M mannitol solution. The fused oocytes were co-cultured with a monolayer of rabbit oviductal epithelial cells in M-199 solution containing 10% FCS for 120 hours at 39$^{\circ}C$ in a 5% $CO_2$incubator. Following in vitro culture of the NT embryos to blastocyst stage, they were stained with Hoechst 33342 dye for counting the number of blastomeres by fluorescence microscopy. The nuclear transplant embryos developed in vitro to 2- to 4-cell stage were transferred into the oviducts of synchronized recipient does. The results obtained were summarized as follows: 1. The fusion rates of the blastomeres from fresh, cooled and frozen embryos with the in vitro matured and enucleated oocytes were 100, 95.8 and 64, 3%, respectively. 2. Development in vitro to blastocyst was significantly(p<0.05) different between the cloned embryos with the blastomeres from fresh, cooled or frozen embryos as 39.0, 20. 9 and 15.7%, respectively. 3. The mean numbers of cell cycle per day during in vitro culture of cloned embryos blastomeres from fresh, cooled or frozen embryos was 1.31, 1.29 and 1.16, respectively. 4. A total of 77 nuclear transplant embryos were transferred into 6 recipient does, of which two offsprings were produced from a foster mother 31 days after embryo transfer.

• 센서학회지
• /
• 제7권3호
• /
• pp.147-153
• /
• 1998

$Si_{3}N_{4}/SiO_{2}/Si_{3}N_{4}$(N/O/N) 다이아프램과 결합된 고감도의 광섬유 Fabry-Peort 압력센서를 개발하여 스트레인 및 그 응답특성을 조사하였다. 먼저, 44 wt% KOH 수용액을 이용한 실리콘 이방성식각기술로 600 nm 두께의 N/O/N 다이아프램을 제조하였으며, 제조된 다이아프램과 광섬유 Fabry-Perot 간섭계를 결합하여 광섬유 압력센서를 구성하였다. 단일모드 광섬유(SMF)내에 $TiO_{2}$ 유전체 박막을 용융접합하여 공극의 길이가 약 2 cm인 광섬유 Fabry-Perot 간섭계를 제작하였다. 광섬유 Fabry-Perot 간섭계의 한쪽 끝은 N/O/N 다이아프램과 결합하였으며, 나머지 한쪽을 3 dB 광결합기를 통해 광측정장치에 연결하였다. $2{\times}2\;mm^{2}$ 및 $8{\times}8\;mm^{2}$ 크기의 N/O/N 다이아프램에 대해 응답특성을 조사한 결과, 각각 약 0.11 rad/kPa과 1.57 rad/kPa의 압력감도를 나타내었으며, 선형오차는 0.2 %FS이내였다.

• 한국재난정보학회 논문집
• /
• 제14권3호
• /
• pp.325-333
• /
• 2018

연구목적: 본 연구는 화학테러현장에서 총괄지휘권을 갖는 경찰을 중심으로 현장대응매뉴얼의 실행력을 확보하기 위해 서비스디자인 분석기법을 적용해 관찰 및 분석하고 이를 통해 문제점을 밝혀내고 개선사항을 제안하는 것을 목적으로 한다. 연구방법: 연구를 위해 경찰의 테러 대응 매뉴얼에서 화생방 테러 대응 지휘체계를 중심으로 자료를 수집하였다. 또한 분석에서 매뉴얼의 사용자 외에도 다양한 이해관계자들을 고려해야 하기 때문에 참여자들의 관계가 적용되는 방법론을 활용하여 분석하고자 서비스 디자인 분석기법을 활용하였다. 연구결과: 최종 치안서비스의 수혜자인 피해시민의 관점에서 대응매뉴얼의 서비스 프로세스를 진단하였으며, 현장대응 서비스 과정에서 발생하는 피해시민과 현장대원간, 후방대원간, 프로세스간 대기지점(Waiting Point)과 실패요소(Failure Factor)를 확인하였다. 결론: 본 연구를 통해 화학테러 현장 대응 활동을 서비스의 개념으로 파악하여 각 관계기관과 현장에 있는 시민과의 상호작용 및 비가시 영역에서의 후방지원활동과 장비 시설물의 활용성을 한 번에 검토함으로써 문제요소별 개선대안을 도출할 수 있었다.