• Elastomers and Composites
• /
• 제52권4호
• /
• pp.266-271
• /
• 2017

This study describes the influence of the amount of curing agent and curing temperature on the kinetics of polyurethane elastomers. The urethane prepolymer series was prepared by reacting toluene diisocyanate with polytetramethylene ether glycol at $80^{\circ}C$ for 1 h, and 4,4'-methylene bis(2-chloroaniline) was used as the curing agent. The ratio of the amine group of the curing agent to the isocyanate group of the urethane prepolymer was controlled from 0.85 to 1.05 at curing temperatures ranging from 80 to $120^{\circ}C$. The curing rate of the urethane prepolymer was monitored by observing the change in heat flow during the curing process using differential scanning calorimetry (DSC). As either the content of curing agent or the curing temperature was higher, the conversion rate to the polyurethane elastomer was high. The DSC results were compared with those obtained from using real-time FT-IR.

• 한국염색가공학회지
• /
• 제5권3호
• /
• pp.221-228
• /
• 1993

Cellulose acetate and methyl cellulose were synthesized from waste cellulose in order to make waste knit on value added highly. Crystal waste cellulose by oxidation using $HIO_4$ and then acetylation was decrystallized. A degee of crystallinity was measured by X-ray diffraction and the structure was identified by FT-IR spetroscopy, respectively. Cellulose acetate was prepared from the reaction of decrystallized cellulose with acetic acid, cone-$H_{2}SO_{4}$ and acetic anhydride. Also, structure identification by FT-IR and a degree of crystallinity by X-ray diffraction were performed. DS of the synthesized cellulose acetate was 2.8 and viscosity average molecular weight was 238,000. Also, methyl cellulose was synthesized by treating cellulose acetate with NaOH and iodomethane. DS of the synthesized methyl cellulose was 3.0. Glucose unit with three hydroxy groups was all substituted by methoxyl groups. It was identified by FT-IR spectroscopy. Also, the thermal properties of the synthesized methyl cellulose were examined by DSC. It shewed two shewed melting peaks at 22$0^{\circ}C$ and 24$0^{\circ}C$ in the 2nd scan. It proved that DS=3.0 of methyl cellulose was a thermotropic liquid crystal.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2013년도 제44회 동계 정기학술대회 초록집
• /
• pp.252-252
• /
• 2013

최근 그래핀, hexagonal boron nitride (h-BN) 및 $MoS_2$ (molybdenum disulfide)와 같은 2차원 결정 물질들은 무어의 법칙(Moore's Law)를 뛰어넘어 계속적인 소자의 소형화를 가능케 하고 또한 대면적, 저비용 소자 개발을 가능케 하는 우수한 특성을 가진 차세대 반도체 트랜지스터 소재로 각광받고 있다. $MoS_2$는 bulk 상태일 때는 1.2 eV의 indirect 밴드갭을 가지지만 단층형태일 때는 1.8 eV의 direct 밴드갭을 가지며 dielectric screening 기법등을 통해 mobility를 향상시킬 수 있는 것으로 연구된 바 있다. 본 연구에서는 화학기상증착 (chemical vapor deposition)법을 이용하여 $MoS_2$ 박막을 형성하기 위한 기초연구인 Mo 전구체의 특성평가 및 적합한 공정조건 개발 연구를 수행하였다. 사용한 전구체는 $Mo(CO)_6$ (Molybdenum hexacarbonyl)이고, 온도 및 압력, 반응기체(H2 S, Hydrogen sulfide) 유량 등의 공정 조건 변화에 따른 거동을 Fourier transform infrared spectroscopy (FT-IR) 시스템을 사용하여 측정하였다. 또한 $Mo(CO)_6$의 분자구조를 상용 프로그램인 Gaussian으로 시뮬레이션 하여 실제 FT-IR 측정 결과값과 비교 분석하였다.

• Macromolecular Research
• /
• 제11권1호
• /
• pp.14-18
• /
• 2003

Grafting of glycidyl methacrylate (GMA) upon coralline hydroxyapatite in conjugation with demineralized bone matrix (CHA-DBM) using equal molar ratio of potassium persulfate/sodium metabisulfite redox initiating system was investigated in aqueous medium. The optimum reaction condition was standardized by varying the concentrations of backbone, monomer, initiator, temperature and time. The results obtained imply that the percent grafting was found to increase initially and then decrease in most of the cases. The optimum temperature and time were found to be 50 $^{\circ}C$ and 180 min, respectively, to obtain higher grafting yield. Fourier transform infrared (FT-IR) spectroscopy and X-ray powder diffraction (XRD) method were employed for the proof of grafting. The FT-IR spectrum of grafted CHA-DBM showed epoxy groups at 905 and 853 $cm^{-1}$ / and ester carbonyl group at 1731 $cm^{-1}$ / of poly(glycidyl methacrylate) (PGMA) in addition to the characteristic absorptions of CHA-DBM, which provides evidence of the grafting. The XRD results clearly indicated that the crystallographic structure of the grafted CHA-DBM has not changed due to the grafting reaction. Further, no phase transformation was detected by the XRD analysis, which suggests that the PGMA is grafted only on the surface of CHA-DBM backbone. The grafted CHA-DBM will have better functionality because of their surface modification and hence they may be more useful in coupling of therapeutic agents through epoxy groups apart from being used as osteogenic material.

• Macromolecular Research
• /
• 제16권2호
• /
• pp.113-119
• /
• 2008

A series of amphiphilic dendrons n-18 (n: generation number, 18: octadecyl chain) based on an aliphatic polyether denderitic core and octadecyl peripheries were synthesized using a convergent dendron synthesis consisting of a Williamson etherification and hydroboration/oxidation reactions. This study investigated their thermal and self-assembling behavior in the solid state using differential scanning calorimetry (DSC), Fourier transform infrared (FT-IR) absorption spectroscopy, and small angle X-ray scattering (SAXS). DSC indicated that the melting transition and the corresponding heat of the fusion of the octadecyl chain decreased with each generation. FT-IR showed that the hydroxyl focal groups were hydrogen-bonded with one another in the solid state. DSC and FT-IR indicated microphase-separation between the hydrophilic dendritic cores and hydrophobic octadecyl peripheries. SAXS data analysis in the solid state suggested that the lower-generation dendrons 1-18 and 2-18 self-assemble into lamellar structures based upon a bilayered packing of octadecyl peripheries. In contrast, the analyzed data of higher-generation dendron 3-18 is consistent with 2-D oblique columnar structures, which presumably consist of elliptical cross sections. The data obtained could be rationalized by microphase-separation between the hydrophilic dendritic core and hydrophobic octadecyl peripheries, and the degree of interfacial curvature associated with dendron generation.

• 에너지공학
• /
• 제20권1호
• /
• pp.36-43
• /
• 2011

식물계 바이오매스는 석유로부터 얻어지는 화학물질들을 대체할 수 있는 물질로 제안되고 있다. 특히 식물계 바이오매스의 15-30%를 이루고 있는 리그닌은 복잡한 방향족 중합체로 이루어져 있어, 리그닌의 저분자화 공정에 의해 다양한 방향족 화합물을 얻을 수 있다. 본 연구에서는 국내에서 가장 많이 배출되는 크래프트 리그닌을 출발 물질로 선정하고, $^{13}C$-Muclear Magnetic Resonance($^{13}C$-NMR), Fourier Transform Infrared Spectroscopy (FT-IR), Elemental Analysis(EA)을 통해 원료물질의 화학적 구조를 분석하였다. 크래프트 리그닌의 저분자화 는 물-페놀 혼합 용매의 근임계 영역에서 수행되었으며, tube bomb reactor를 사용하였다. 최적의 반응조건을 찾기 위해 물-페놀의 비율, 반응온도($300-400^{\circ}C$)를 변화시키며 실험을 수행하였다. 또한 기체상 수소를 대신하여 수소발생 용매인 formic acid 사용에 따른 영향을 조사하였다. 액상 생성물의 화학 종류 및 양은 GC-MS를 통해 분석하였고, 고체 잔류물(char)은 FT-IR을 통해 분석하였다. GC-MS 분석 결과 페놀이 첨가된 경우 anisole, o-cresol(2-methylphenol), p-cresol(4-methylphenol), 2-ethylphenol, 4-ethylphenol, dibenzofuran, 3-methyl cabazole, xanthene이 생성되는 것을 확인하였다.

• 폴리머
• /
• 제34권2호
• /
• pp.108-115
• /
• 2010

본 연구는 MWCNT로 보강된 SBR 나노복합재료를 컴파운딩법(compounding)으로 제조하여 산 처리된 MWCNT와 커플링제 상호간의 물리적 화학적 특성을 조사하였다. 황산과 질산으로 산화된 MWCNT는 FT-IR 분석 결과 -COOH로 기능화됨을 확인하였고, Raman 분석 결과 표면의 defect 존재와 disorder됨을 확인하였다. 또한, 제조된 SBR 복합재료의 가황 특성, 전기적 열적 특성 및 기계적 특성을 비교 평가하였다. 그 결과 산 처리된 MWCNT와 커플링제와의 상호 결합력으로 인해 기계적 물성은 상대적으로 증가하였으나, 전기적 열적 특성은 MWCNT의 defects나 disorder의 형성과 chopping으로 인해 감소됨을 확인할 수 있었다.

• 대기
• /
• 제19권4호
• /
• pp.319-329
• /
• 2009

The intensive dust observation experiment has been performed at Korea Global Atmosphere Watch Center (KGAW) in Anmyeon, Korea during each spring season from 2007 to 2009. Downward and upward hyper-spectral spectrums over the dust condition were measured to understand the hyper-spectral properties of Asian dust using both ground-based Fourier Transform Infrared Spectroscopy (FT-IR) and space-borne AIRS/Aqua. To understand the impact of the Asian dust, a Line-by-Line radiative transfer model runs to calculate the high resolution infrared spectrum over the wave number range of $500-500cm^{-1}$. Furthermore, the radiosonde, a $PM_{10}$ Sampler, a Micro Pulse Lidar (MPL), and an Aerodynamic Particle Sizer (APS) are used to understand the vertical profile of temperature and humidity and the properties of Asian dust like concentration, altitude of dust layer, and size distribution. In this study, we found the Asian dust distributed from surface up to 3-4 km and volume concentration is increased at the size range between 2 and $8{\mu}m$ The observed dust spectrums are larger than the calculated clear sky spectrums by 15~60K for downward and lower by around 2~6K for upward in the wave number range of $800-1200cm^{-1}$. For the characteristics of the spectrum during the Asian dust, the downward spectrum is revealed a positive slope for $800-1000cm^{-1}$ region and negative slope over $1100-1200cm^{-1}$ region. In the upward spectrum, slopes are opposed to the downward one. It is inferred that the difference between measured and calculated spectrum is mostly due to the contribution of emission and/or absorption of the dust particles by the aerosol amount, size distribution, altitude, and composition.

• Bulletin of the Korean Chemical Society
• /
• 제13권5호
• /
• pp.474-479
• /
• 1992

Molecular interaction between ${\alpha}$-cyclodextrin and aspirin was studied by UV, $^2H$-NMR and $^2H$-NMR spectroscopy analyses for solution complex and by FT-IR analyses for solid complex. The inclusion structure provides a basic understanding of the aspirin and ${\alpha}$-cyclodextrin interaction.

• 한국산학기술학회논문지
• /
• 제4권3호
• /
• pp.209-213
• /
• 2003

Polyaniline (PANi) composite particles were synthesized by chemical oxidation polymerization of aniline in presence of poly-n-isopropyl acryl amide (PNIPAM). The PANi particles formed in the reaction medium deposited onto non-conducting PNIPAM template to produce PANi-coated composite particles. The formation of composite was confirmed by FT-IR spectroscopy, and UV-VIS spectroscopy, and their morphological structures were examined by scanning electron microscopy (SEM). From the experimental results, it was determined that PANi was successfully coated onto non-conducting PNIPAM.