• Bulletin of Food Technology
• /
• v.3 no.3
• /
• pp.109-122
• /
• 1990

• Proceedings of the Korean Vacuum Society Conference
• /
• 2008.08a
• /
• pp.83-83
• /
• 2008

• Bulletin of the Korean Chemical Society
• /
• v.19 no.8
• /
• pp.888-891
• /
• 1998

• Bulletin of the Korean Chemical Society
• /
• v.17 no.5
• /
• pp.470-473
• /
• 1996

• Rubber Technology
• /
• v.8 no.1
• /
• pp.40-47
• /
• 2007

• Journal of Photoscience
• /
• v.9 no.2
• /
• pp.457-459
• /
• 2002

Sunlight causes various types of adverse skin changes on the sun-exposed areas of the skin, in which the most hazardous one is the induction of malignant skin tumours. FT -IR spectra were obtained from specimens excised from normal skin, BCCs, SCCs, MMs, nevi, lesions of solar keratosis and Bowen's disease. Tissue samples from freshly frozen specimens were cut into 2 sections in strictly sequential order to be stained with H & E for histopathological analysis, and then to be air-dried on CaF$_2$ slide glasses for further spectral data acquisition from defined area of interest. Intra- and inter-sample variations were estimated within grouped lesion categories according to each skin component. Mean spectra for each type of tissue pathology in the 800-1800 $cm^{-1}$ / region was interpreted using the classical group frequency approach that showed the most visible differences in spectra of benign, premalignant and malignant changes directly related to protein conformation and nucleic acid bases. The relative intensity of the nucleic acid peak was increased with progression to malignancy. In addition, PCA was able to evaluate and maximise the differences in the spectra by reducing the number of variables characterizing each patient and pathology category. This type of approach to non-destructively estimate the complexity of IR-spectra of inhomogeneous samples such as skin demonstrates the advantage of FT -IR microspectroscopy to be able to observe diseased states (benign, premalignant, malignant) and distinguish them from normal against a huge background of inter- and intra-subject variability.

• Korean Journal of Materials Research
• /
• v.11 no.7
• /
• pp.603-608
• /
• 2001

$MO-SiO_2$ (M = Zn, Sn, In, Ag, Ni) binary silica gels were synthesized by sol-gel method and their structural change with the kind of metal ions was characterized by XRD, FT- IR and $^{29}$Si-NMR. Although X-ray analysis showed partial recrystallization of $AgNO_3$ in $Ag-SiO_2$gel, crystalline phase formed by the bonding between metal ion and the silica matrix didn't appear in all $MO-SiO_2$ gels. The FT-IR analysis showed that Zn, Sn and in partially formed Si-O-M bonding in silica matrix and made an shift of absorption peak to by Si-O-Si symmetrical vibration. In addition, $^{29}Si-NMR$ studies showed that Zn, Sn and In didn't affect sol-gel process of silica and were linked with non-bridging oxygen of the linear silica structure, which formed imperfect network because of low temperature sol-gel process. Ag and Ni make a role of catalysis on sol-gel process, resulting in densifying the silica network structure.

• Korean Journal of Metals and Materials
• /
• v.46 no.11
• /
• pp.755-761
• /
• 2008

We fabricated thermally evaporated 10 nm-Ni/1 nm-Ir/(poly)Si films to investigate the energy saving property of silicides formed by rapid thermal annealing (RTA) at the temperature range of $300{\sim}1200^{\circ}C$ for 40 seconds. Moreover, we fabricated 100 nm-thick ITO/(poly)Si films with an rf-sputter as references. A transmission electron microscope (TEM) and an X-ray diffractometer were used to determine cross-sectional microstructure and phase changes. A UV-VIS-NIR and FT-IR (Fourier transform infrared spectroscopy) were employed for near-IR and middle-IR absorbance. Through TEM analysis, we confirmed 20~65 nm-thick silicide layers formed on the single and polycrystalline silicon substrates. Ir-inserted nickel silicide on single crystalline substrate showed almost the same absorbance in near IR region as well as ITO, but Ir-inserted nickel silicide on polycrystalline substrate, which had the uniform absorbance in specific region, showed better absorbance in near IR region than ITO. The Ir-inserted nickel silicide on polycrystalline substrate particularly showed better absorbance in middle IR region than ITO. The results imply that nano-thick Ir-inserted nickel silicides may have excellent absorbing capacity in near-IR and middle-IR region.

• Korean Chemical Engineering Research
• /
• v.49 no.1
• /
• pp.109-113
• /
• 2011

Crystallization of calcium carbonate were performed by adding aspartic acid and lysine into $CaCl_2$ solution for understanding biomineralization in gas-liquid reaction of $NH_4HCO_3$ and $CaCl_2$. Proportion between calcite and vaterite of calcium carbonate crystals was identified by changing conditions such as reaction time, addition amount of aspartic acid, lysine, $CaCl_2$, and $NH_4HCO_3$. FT-IR(Fourier Transform Infrared spectroscopy) instrument was used to perform analysis of vaterite ratio. Under the condition of $NH_4HCO_3$ 10 g and no additive, an increase of vaterite crystal changed to a decrease around 0.15 M $CaCl_2$. Then it largely increased at 0.25 M $CaCl_2$, after vaterite proportion was rising again at 0.20 M $CaCl_2$. In contrast to that, vaterite crystal continuously decreased to 0.2 M $CaCl_2$, and increased from 0.25 M $CaCl_2$ with 20 g $NH_4HCO_3$. Vaterite crystals were observed to be a maximum after 2days with lysine addition, but $CaCO_3$ vaterite crystals showed minimum with aspartic acid.

• Applied Chemistry for Engineering
• /
• v.9 no.2
• /
• pp.249-254
• /
• 1998

To synthesize cation exchange resin which has thermal stability, the sulfonated poly(ether ether sulfone) (SPEES) was obtained by sulfonation after synthesis of poly(ether ether sulfone) (PEES). It was prepared from hydroquinone and dichlorophenyl sulfone. From FT-IR results, the sulfonation was confirmed by the bands of asymmetric O=S=O stretching of $SO_3Na$ Na group at $1140cm^{-1}$ and S-C stretching at $621cm^{-1}$. The optimum condition of the sulfonation of PEES, based on IR absorbance, was 3 hr of reaction time, $30^{\circ}C$ of reaction temperature, and chlorosulfonic acid of 150 mol%. Ion exchange capacities calculated by the IR absorbance of PEES sulfonated in optimum condition was 6.2 meq/g, which was nearly similar to the ion exchange capacity calculated by titration. When the metal ion was adsorved, small brain, lump, hulled millet shape and compact surface, were observed in the morphology of SPEES.