• Journal of the Korea Concrete Institute
• /
• v.16 no.4 s.82
• /
• pp.493-500
• /
• 2004

FREP(Fiber Reinforced Epoxy Panel) are used for strengthening the damaged RC beams due to its good tensile strength, low weight, resistance to corrosion, and easy applicability. This study sets up structure equation for FREP bending reinforcement before and during the usage of RC beam. It finds the difference and finds the mechanical characteristics of rip-off failure that is caused by stress concentration in reinforcement material cutting part to estimate the performance of bending reinforcement. The result of this research can be summarized as two main consequences. The main failure of FREP reinforced concrete beam is rip-off failure and it evaluated rip-off failure of RC reinforcing bean based on the test and analytical conditions of this study. It found that stress was concentrated due to rapid change of bending rigidity in reinforced cutting part as a result of excessive reinforcement thickness of FREP. It resulted in rip-off failure. It means that it should evaluate the rip-off failure when designing reinforcement. It analyzed the reinforcement effect according to reinforced period for FREP. It found that reinforcement effect of P-Type that was reinforced during the usage decreased compared to I-Type that was reinforced before the usage. So when reinforcing a existing structure that is being used, it should consider the stress that is produced due to the fixed load.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2004.11a
• /
• pp.829-832
• /
• 2004

FREP(Fiber Reinforced Epoxy Panel), the products of our company, was widely made full use of a field of the reinforced concrete. In particular, the FREP used for repair and reinforcement of the subway and tunnel is required flame retardative property. In this study, flame retardative FREP using flame retardant of non-halogen system was fabricated by impregnation method. Flame retardative grade was the third grade. Tensile strength, flexural strength, and compressive strength was 1,384, 1,298, and $1,450kg/cm^2$, respectively.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2003.05a
• /
• pp.585-590
• /
• 2003

It analyzed the reinforcement effect according to reinforced period for FREP. It found that reinforcement effect of P-Type that was reinforced during the usage decreased compared to I-Type that was reinforced before the usage. So when reinforcing a existing structure that is being used, it should consider the stress that is produced due to the fixed load. It evaluated bending and shear of RC reinforcing beam based on the test and analytical conditions of this study. It found that stress concentration was concentrated due to rapid change of bending rigidity in reinforced cutting part as a result of excessive reinforcement thickness of FREP. It resulted in rip-off failure. It means that it should evaluate the shear when designing reinforcement.

• Journal of Korean Academy of Nursing
• /
• v.43 no.1
• /
• pp.133-142
• /
• 2013

Purpose: The purpose of this study was to evaluate the effects of the Family Resilience Enhancement Program (FREP) on family hardiness, family sense of coherence, family problem solving communication, family crisis oriented personal evaluation, and adaptation in families of patients with chronic schizophrenia. Methods: The study design was a nonequivalent control group prepost test design. Study participants were 17 families in the experimental group and 17 in the control group. Ten sessions of FREP were provided over 5 weeks. The data were analyzed using SPSS 15.0. Results: There were statistically significant differences in family hardiness, family sense of coherence, family problem-solving communication, family crisis-oriented personal evaluation, social resources, and family adaptation between the experimental group and the control group. Conclusion: FREP based on the family resilience model developed in this study, shows the effect of leading the families to positive family adaptation.

• Journal of Microbiology and Biotechnology
• /
• v.27 no.9
• /
• pp.1716-1723
• /
• 2017

The rapid dissemination of extended-spectrum ${\beta}$-lactamase (ESBL)-producing Escherichia coli has significantly contributed to public health hazard globally. A total of 281 E. coli strains recovered from pigs and chickens between 2009 and 2015 in South Korea were analyzed for ESBL production. ESBL phenotypes were recognized in 14 E. coli isolates; ten and three ESBL-producing isolates carried only $bla_{CTX-M}$ and $bla_{CMY}$ genes, respectively, and one isolate harbored both genes. The predominant CTX-M and CMY types were CTX-M-15 (n = 8) and CMY-2 (n = 3). We also detected ESBL-producing isolates harboring $bla_{CTX-M-65}$, $bla_{CTX-M-14}$, $bla_{CMY-6}$, $bla_{DHA-1}$, and $bla_{TEM-1}$ genes. All ESBL-producing isolates showed resistance to the extent of the fourth generation cephalosporins, along with multidrug resistance. CTX-M-15-producing isolates showed higher MIC values than CTX-M-14- and CTX-M-65-producing isolates. The $bla_{CTX-M}$ and $bla_{CMY}$ genes have the potential to be transferable. The spreading of $bla_{CMY}$ and $bla_{CTX-M}$ genes was arbitrated mainly via Frep and IncI1 plasmids. Our isolates showed clonal diversity in PFGE analysis. This is the first report of E. coli isolates carrying $bla_{CMY-6}$ in chicken from South Korea. The emergence of CMY-6 ESBLs in a population of poultry suggests that extensive screening with long-term surveillance is necessary to prevent the dissemination of ESBL from chicken to human.

• Journal of Veterinary Science
• /
• v.25 no.5
• /
• pp.62.1-62.13
• /
• 2024

Importance: Antimicrobial resistance (AMR) is a serious public health threat. AMR bacteria and their resistance determinants in food can be transmitted to humans through the food chain and by direct contact and disseminate directly to the environment. Objective: This study examined the AMR characteristics and transferable R plasmids in Escherichia coli isolated from meat ducks raised in an open-house system. Methods: One hundred seventy-seven (n = 177) commensal E. coli were examined for their antimicrobial susceptibilities and horizontal resistance transfer. The plasmids were examined by PCR-based plasmid replicon typing (PBRT) and plasmid multi-locus sequence typing (pMLST). Results: The highest resistance rate was found against ampicillin (AMP, 83.0%) and tetracycline (TET, 81.9%), and most isolates exhibited multidrug resistance (MDR) (86.4%). The R plasmids were conjugally transferred when TET (n = 4), AMP (n = 3), and chloramphenicol (n = 3) were used as a selective pressure. The three isolates transferred resistance genes either in AMP or TET. The blaCTX-M1 gene resided on conjugative plasmids. Five replicon types were identified, of which Inc FrepB was most common in the donors (n = 13, 38.4%) and transconjugants (n = 16, 31.2%). Subtyping F plasmids revealed five distinct replicons combinations, including F47:A-:B- (n = 2), F29:A-:B23 (n = 1), F29:A-:B- (n = 1), F18:A-B:- (n = 1), and F4:A-:B- (n = 1). The chloramphenicol resistance was significantly correlated with the other AMR phenotypes (p < 0.05). Conclusions and Relevance: The meat ducks harbored MDR E. coli and played an important role in the environmental dissemination of AMR bacteria and its determinants. This confirms AMR as a health issue, highlighting the need for routine AMR monitoring and surveillance of meat ducks.