• Proceedings of the KIEE Conference
• /
• 2005.10b
• /
• pp.127-129
• /
• 2005

본 연구에서는 백라이트 유닛의 검사를 위한 머신비전 시스템을 구축한다. 시스템은 크게 하드웨어와 소프트웨어로 나눌 수 있고 하드웨어는 조명부, 영상획득부, 로봇 암 제어부로 분류된다. 조명부는 36W FPL램프로 구성되었고 조명부의 상판에 아크릴판을 거치대로 이용하여 백라이트 유닛을 거치한다. 로봇 암 제어부는 2축 로봇 암을 제어하여 로봇 암의 센서부착 지지대에 부착된 CCD 센서를 이동시킨다. 이와 동시에 영상획득부에서는 이미지를 획득하여 PC로 전송한다. 소프트웨어의 화상처리 검사 알고리즘은 일정 패턴이 있는 도광판에 대한 검사 알고리즘과 일정패턴이 없근 백라이트 유닛에 대한 검사 알고리즘으로 분리된다. 일정 패턴이 인쇄되어 있는 패널에 대한 검사 알고리즘은 모폴로지 연산을 이용하는 템플릿 체크방법과 블록 매칭 방법이 사용되었고 일정패턴이 없는 유닛에 대한 검사는 개선된 Otsu 방법을 이용하여 얼룩이나 흐릿한 결함에 대한 결함을 검출하였다. 실험결과 불균일한 결함과 밝기가 일정하지 않은 결함일지라고 90% 이상의 검출율로 뛰어난 성능을 입증하였다.

• Proceedings of the Korean Society for Emotion and Sensibility Conference
• /
• 2002.05a
• /
• pp.215-220
• /
• 2002

본 연구에서는 다중채널 뇌파에서 특징 파라미터로 선형 예측기 계수(Linear predictor coefficients)를 추출하고, 패턴인식기로는 신경회로망을 이용한 쾌적성 분류 알고리즘을 개발하여 다중 템플릿 방법으로 쾌적성 분류 실험을 하고자 하였다. 뇌파 데이터는 대학생 10명으로부터 쾌적한 환경과 불쾌적한 환경에서의 데이터를 수집하였으며, 전극 위치는 Fpl, Fp2, F3, F4, T3, T4, P3, P4, O1, O2를 사용하였다. 수집된 뇌파는 전처리를 거친 후 특징 파라미터를 추출하고 패턴 분류기로 사용된 신경회로망의 입력으로 사용하였다. 쾌적성 분류 방법은 다중템플릿 방법으로 여러 명의 피검자를 각각 학습시켜 이로부터 생성되는 신경회로망의 가중치들을 템플릿에 저장한다. 그리고 테스트를 할 때에는 먼저 처음의 안정 상태의 뇌파를 이용하여 템플릿 검색을 하고 가장 가까운 템플릿을 선택한다. 그리고 선택된 템플릿을 이용하여 다른 감정에 대한 쾌적성 분류 실험을 하게 된다. 쾌적성 분류 실험 결과 평균 인식률이 약 75%의 성능을 나타내었다.

• Plant Resources
• /
• v.4 no.1
• /
• pp.26-30
• /
• 2001

To improve the iron content of red pepper, we have transferred the entire coding sequence of the ferritin gene(Fpl) into Capsicum annuum (L. cv. Chungyang and Bukang) by Agrobacterium mediated transformation. Transformants were found to contain the Fp1 gene at up to three loci, increased distinct iron content changes. In transgenic plants, iron content was as much as 7-fold to 8-folds greater than that of their untransformed counterparts. Furthermore, the Rl progenies from transformant(A7, A8) co-segregated into a 15:1 ratio for both Kanamycin resistance and genotype of high iron.

• Journal of the Korean Wood Science and Technology
• /
• v.46 no.1
• /
• pp.10-16
• /
• 2018

Lindera erythrocarpa is a less utilized species in Korea although that it has straight stem and it grows up to 40 cm in diameter. A proper kiln-dry schedule is required in advance to utilize an unknown species. Terazwa's quick oven-dry method was used to find it and which was confirmed by drying 25 mm thick boards in a kiln. The average green moisture content and the average green specific gravity of Lindera erythrocarpa are 72.3% and 0.53, respectively. Prospective kiln-drying conditions obtained by Terazwa's quick oven-dry method are a initial dry-bulb temperature of $50^{\circ}C$, a initial wet-bulb depression of $4^{\circ}C$ and a final dry-bulb temperature of $75^{\circ}C$, which are in a good agreement with USDA FPL kiln-dry schedule of T5-D4. 25 mm thick boards dried in a kiln with T5-D4 kiln-dry schedule did not have any severe drying defects such as honycombing and warping. A severer kiln-dry schedule of T8-C5 was developed and applied to another kiln-drying run to confirm it.

• Journal of Korean Society of Forest Science
• /
• v.95 no.1
• /
• pp.55-59
• /
• 2006

The objectives of this study, an analysis of the morphological characteristics among six provenances of a rare Rhododendron micranthum could be used for the conservation of gene resources and could provide information on superior trees selection. The following results were obtained. Approximately Mt.worak region showed larger values at petal character. On the other hand, Bonghwa region showed smaller values at petal character. Yeonha-ri region showed larger values at leaf character. On the other hand, Bonghwa region showed smaller values at leaf character. The results of principal component analysis (PCA) for morphological characteristics showed that the first for principal components(PC's) explained 41.6% of the total variation. From th third PC explained 81.5% of the total variation. The first PC was correlated with those characteristics that were mainly related to the Petal length (PL), Leaf length (LL) width (LW), Stigma length (SL). The second PC was correlated with the Petiole length (PTW), Anther length (AL). The third PC was correlated with the Flower pedicel length (FPL), Filament length (FL). Therefore, these characteristics was important to analysis of the variation for morphological characteristics among provenances of Rhododendron micranthum. Cluster analysis using single linkage method based on morphological characteristics showed that six provenances of Rhododendron micranthum could be clustered into three groups. Group I is Jicdong-ri, Group II is Mt.worak and Yeonha-ri, and Group III is Taeback, Bonghwa, and Samcheok. These results corresponded well with that of principal component analysis.

• Composites Research
• /
• v.13 no.4
• /
• pp.42-53
• /
• 2000

A study has been made to establish an optimum condition in the surface treatment and curing method that is important for the fabrication of Al 7075/CFRP laminates. PAA(Phosphoric Acid Anodizing) provided a good adhesive strength and FPL(Sulfuric / Sodium Dichromate Acid Etching) had a similar adhesive strength with PAA. On the other hand, the poor adhesive strength was shown on vapor degrease and CAA(Chromic Acid Anodizing). By using the atomic force microscope(AFM), it was found that the PAA oxide surface obviously had a greater degree of microroughness as compared to vapor degrease, CAA and FPL treated surfaces. These results support the concept of a mechanical interlocking of the adhesive with-in the oxide pores as the predominant adhesion mechanism. In curing methods, the adhesive strength of co-curing method was higher than that of secondary curing method. With respect to stability of specimen shape, the secondary curing method was better than co-curing method. DMA(Dynamic Mechanical Analysis) test revealed $T_g$ in curing times over 60 min is nearly same, so it is estimated they will have similar degree of curing and joint durability in using FM300M adhesive film.

• The Journal of Korea Robotics Society
• /
• v.12 no.3
• /
• pp.270-278
• /
• 2017

The electrical muscle stimulator (EMS) based human machine interface (HMI) free to mechanical constraint and muscle fatigue problems are proposed for force feedback in a virtual reality. The device was designed to provide force feedback up to 4.8 N and 2.6 N each to the thumb and forefingers. The main objective of the HMI is to make unnecessary mechanical structures to attach on the hand or fingers. It employs custom EMSs and an interface arranged in the forearm. In this work, major muscle groups such as extensor pollicis brevis (EPB), extensor indicis proprius (EIP), flexor pollicis longus (FPL) and flexor digitorum profundus (FDP) are selected for efficient force feedback and controlled individually. For this, a human muscular-skeletal analysis was performed and verified. The validity of the proposed multi-channel EMS based HMI was evaluated thorough various experiments with ten human subjects, interacting with a virtual environment.

• The Transactions of the Korean Institute of Electrical Engineers D
• /
• v.55 no.4
• /
• pp.161-164
• /
• 2006

In this thesis we designed the vision system to inspect the defect of a back light unit of plat panel display device. The vision system is divided into hardware and inspection algorithm of defect. Hardware components consist of illumination part, robot-arm controller part and image-acquisition part. Illumination part is made of acrylic panel for light diffusion and five 36W FPL's(Fluorescent Parallel Lamp) and electronic ballast with low frequency harmonics. The CCD(Charge-Coupled Device) camera of image-acquisition part is able to acquire the bright image by the light coming from lamp. The image-acquisition part is composed of CCD camera and frame grabber. The robot-arm controller part has a role to let the CCD camera move to the desired position. To take inspections of surface images of a flat panel display it can be controlled and located every nook and comer. Images obtained by robot-arm and image-acquisition board are saved on the hard-disk through windows programming and are tested whether there are defects by using the image processing algorithms.

• Proceedings of the KSME Conference
• /
• 2001.11a
• /
• pp.204-209
• /
• 2001

In this research, the effects of fiber stacking sequence on damage behaviors of FML(Fiber Metal Laminates) subject to indentation loading. SOP (Singly Oriented Ply) FML and angle ply FML were fabricated to study fiber orientation effects and angle ply effects. FML were fabricated by using 1050 aluminum laminate and carbon/epoxy prepreg. To increase adhesive bonding strength, Al laminate was etched using FPL methods. The static indentation test were conducted by using UTM(5ton, Shimadzu) under the 2side clamped conditions. During the tests, load and displacement curve and crack initiation and propagation behaviors were investigated. As fiber orientation angle increases, the crack initiation load of SOP FML increases because the stiffness induced by fiber orientation is increased. The penetration load of SOP FML is influenced by the deformation tendency and boundary conditions. However, the macro-crack of angle ply FML was initiated by fiber breakage of lower ply because angle plies in Angle ply FML prevents the crack growth and consolidation. The Angle ply FML has a critical cross-angle which prevent crack growth and consolidation. Damage behavior of Angle ply FML is changed around the critical cross-angle.

• Proceedings of the Korean Society for Emotion and Sensibility Conference
• /
• 2000.11a
• /
• pp.38-43
• /
• 2000

In this present study, the correlation between subjective preference of essential odors and EEG response were investigated quantitatively. EEG signals were measured from 19 electrodes according to the International 10-20 system (Fpl, Fp2, F2/4, F7/8, Fz, C3/4, Cz, P3/4, Pz, T3/4, T5/6, Ol/2) from 8 healthy males subjects in four odor conditions. Four odor conditions (Rose oil bulgarian, Lemon oil misitano, Jasmin abs, Laverder iol france (KIMEX co. Ltd)) were applied for each subject in the experiment. Through the subjective evaluation, the most pleasant odor for each subject was determined. The power spectrum of ${\alpha}$/${\beta}$ of EEG signals from the most pleasant odor was compared with those from the control condition, which has no odor at all. It was observed that the power spectrum of ${\alpha}$/${\beta}$ of EEG from the most pleasant odor was increased significantly on F3, F3, F4,74 comparing to the control condition. This result indicates that the power spectrum of ai${\beta}$ could be a new index for measuring the levels of pleasantness of odors.