• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2019.05a
• /
• pp.464-466
• /
• 2019

Controllers used in nuclear power plants require high reliability. A controller including a Field Programmable Gate Array (FPGA) and a Complex Programmable Logic Device (referred to hereinafter as FPGA) has been applied to many Nuclear Power Plants (NPP) in the past, including the APR1400 (Advanced Power Reactor 1400), a Korean digital nuclear power plant. Initially, the FPGA was considered as a general IC (Integrated Circuit) and verified only by device verification and performance testing. In the 1990s, research on FPGA verification began, and until the FPGA became a chip, it was regarded as software and the software Verification and Validation (V&V) using IEEE 1012-2004 was implemented. Currently, IEC 62566, which is a European standard, has been applied for a lot of verification. This method has been evaluated as the most sensible method to date. This is because the method of verifying the characteristics of SoC (System on Chip), which has been a problem in the existing verification method, is sufficiently applied. However, IEC 62566 is a European standard that has not yet been adopted in the United States and maintains the application of IEEE 1012 for FPGA. IEEE 1012-2004 or IEC 62566 is a technical standard. In practice, various methods are applied to meet technical standards. In this paper, we describe the procedure and important points of verification method of Nuclear Safety Class FPGA applying SoC verification method.

• ETRI Journal
• /
• v.43 no.6
• /
• pp.1113-1129
• /
• 2021

Lightweight ciphers are increasingly employed in cryptography because of the high demand for secure data transmission in wireless sensor network, embedded devices, and Internet of Things. The PRESENT algorithm as an ultralightweight block cipher provides better solution for secure hardware cryptography with low power consumption and minimum resource. This study generates the key using key rotation and substitution method, which contains key rotation, key switching, and binary-coded decimal-based key generation used in image encryption. The key rotation and substitution-based PRESENT architecture is proposed to increase security level for data stream and randomness in cipher through providing high resistance to attacks. Lookup table is used to design the key scheduling module, thus reducing the area of architecture. Field-programmable gate array (FPGA) performances are evaluated for the proposed and conventional methods. In Virtex 6 device, the proposed key rotation and substitution PRESENT architecture occupied 72 lookup tables, 65 flip flops, and 35 slices which are comparably less to the existing architecture.

• 제어로봇시스템학회:학술대회논문집
• /
• 2002.10a
• /
• pp.89.4-89
• /
• 2002

$\textbullet$ Field Programmable Gate Array $\textbullet$ flexible hardware $\textbullet$ neural network $\textbullet$ determinism learning $\textbullet$ multi-valued logic $\textbullet$ disjunctive normal form $\textbullet$ multi-dimensional exclusive OR

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2006.10a
• /
• pp.65-66
• /
• 2006

• The Magazine of the IEIE
• /
• v.31 no.8
• /
• pp.44-51
• /
• 2004

최근 SoC (System on Chip) 기술의 발전으로 최대 10 Gbps의 처리율을 갖는 네트워크 프로세서가 개발되고 있다. 네트워크 프로세서는 기존의 ASIC (Application Specific Integrated circuit)또는 FPGA (Field Programmable Gate Array) 등 하드웨어가 수행하던 고속의 패킷 처리 기능을 소프트웨어 기반으로 처리하도록 함으로써 다양한 기능의 패킷 처리를 저비용으로 단시간 내에 개발 할 수 있는 장점을 갖고 있다.(중략)

• Journal of IKEEE
• /
• v.20 no.4
• /
• pp.344-350
• /
• 2016

In this Paper, we propose an optimized method of hardware design based on Field Programmable Gate Array (FPGA) to detect rotated angle of high definition image about Extreme Contour Point (ECP) algorithm with moving video image could be not happened to translation motion, but also physical rotation motion. It was evaluated by XC7Z020 xc7z020-3clg400 FPGA board by using xilinx 14.2 tool. The much well-known method, the Coordinate Rotation Digital Integrated Computation (CORDIC) is an algorithm to estimate rotated angle between point and point. Through the result both ECP and CORDIC, our proposed design are confirmed to have similar operating speed of about 4ns with CORDIC. However, it is verified to have high performance result in terms of the hardware cost, is much better than CORDIC with cost reduction of registers and Look Up Tables (LUTs) of 108% and 91%, respectively.

• The KIPS Transactions:PartB
• /
• v.13B no.3 s.106
• /
• pp.223-230
• /
• 2006

A window-based image processing is an elementary part of image processing area. Because window-based image processing is computationally intensive and data intensive, it is hard to perform ail of the operations of a window-based image processing in real-time by using a software program on general-purpose computers. This paper proposes a parallel hardware architecture that can perform a window-based image processing in real-time using FPGA(Field Programmable Gate Array). A dynamic threshold circuit and a local histogram equalization circuit of the proposed architecture are designed using VHDL(VHSIC Hardware Description Language) and implemented with an FPGA. The performances of both implementations are measured.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.9 no.2
• /
• pp.462-469
• /
• 2008

In this paper, we design the FPGA (Field-Programmable Gate Array) of the KOINONIA WPAN (Wireless Personal Area Network), and implement the SoC (System on Chip). We use the redundant bits to make a constant-amplitude in a modulator part. Additionally, the SNR (Signal to Noise Ratio) performance of the demodulator is improved by using the redundant bits in decoding steps. The four-million FPGA of the KOINONIA WPAN can be operated at 44MHz frequency. The PER (Packet Error Rate) of the designed FPGA with RF (Radio Frequency) module is below 1% at the -86dB MIPLS (Minimum Input Power Level Sensitivity), and the SNR is about 13dB. The SoC is implemented by using Hynix 0.25um CMOS (Complementary Metal Oxide Semiconductor) process. The size of the SoC is $6.52mm{\times}6.92mm$.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.21 no.5
• /
• pp.11-18
• /
• 2021

The small radio frequency tracking radar is a tracking system with a radio frequency sensor that identifies a target through all-weather radio frequency signal processing for a target and searches, detects and tracks the target for the major target. In this paper, we describe the development of a board equipped with TMS320C6678 and XILINX FPGA (Field Programmable Gate Array), a high-speed multi-core DSP that acquires target information through all-weather radio frequency and identifies a target through real-time signal processing. We propose DSP-FPGA combination architecture for DSP and FPGA selection and signal processing, and also explain the design of SRIO for high-speed data transmission.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.51 no.9
• /
• pp.182-189
• /
• 2014

A tapped delay line time-to-digital converter (TDC) can be easily implemented using internal carry chains in a field-programmable gate array, and hence, its use is widespread. However, the tapped delay line TDC suffers from performance degradation because of differences in the delay times of dedicated carry chains. In this paper, a dual edge measurement method is proposed instead of a typical step signal to the delay cell to compensate for the performance degradation caused by wide-delay cells in carry chains. By applying a pulse of a fixed width as an input to the carry chains and using the time information between the up and down edges of the signal pulse, the timing accuracy can be increased. Two dedicated carry chain sites are required for the dual edge measurements. By adopting the proposed dual edge measurement method, the average delay widths of the two carry chains were improved by more than 35%, from 17.3 ps and 16.7 ps to 11.2 ps and 10.1 ps, respectively. In addition, the maximum delay times were improved from 41.4 ps and 42.1 ps to 20.1 ps and 20.8 ps, respectively.