• Journal of the Korean Academy of Clinical Electrophysiology
• /
• v.4 no.1
• /
• pp.27-38
• /
• 2006

This study analyzed changes in action potential of supraspinal neuron and motor unit depending on maximum tolerance isometric contraction(MTIC) by electrical stimulation and examined influence of functional electrical stimulation (FES) on spinal neuron adaptation. It selected 40 university students in their twenties and divided into experimental groups of 25% MTIC(I), 50% MTIC I (II), 75% MTIC(III) and 100% MTIC(IV) depending on MTIC by electrical stimulation, and performed isometric contraction of plantar flexor muscle to each experimental group with given contraction for 20 times. It measured V/Mmax and MDF pre and post exercise, compared volume of contraction. 1. V/Mmax ratio showed no significant difference in comparison among experimental groups. 2. There was significant difference in median frequency of gastrocnemius and soleus in action potential motor unit according to comparison among experimental groups(p<.001). When contraction by electrical stimulation was maximum, change was greatest. This results suggest that muscle contraction by electrical stimulation was influence to action potential of spinal motor neuron system which appear optimal level though aspect and difference degree were not in accordance. Consequently, optimal stimulation level of MTIC(50%) by FES would be lead to central nerve adaptation. muscle contraction by electrical stimulation was influence highly to MDF which should be consider to fatigue of motor unit for muscle contraction by electrical stimulation.

• Journal of the Mineralogical Society of Korea
• /
• v.14 no.2
• /
• pp.99-110
• /
• 2001

A gem-quality yttria-stabilized zirconium oxide crystals were synthesized by the skull-melting method, using the RF electrical apparatus. Principal raw materials used were $ZrO_2$and 25 wt.% $Y_2O_3$as stabilizer and 0.03~0.05 wt.% $Nd_2O_3$decolorizing agent were added to it. The single crystals were approximately 20$\times$63 mm in size with chemical composition $Zr_{0.73}$ $Y_{0.27}$ $O_{1.87}$ . The crystals are isotropic with no appreciable anisotropism under a polarizing microscope. Their refractive indices are in the range of 2.15~2.18, specific gravity 5.85, Mohs' hardness 8~8.5, and reflectivity 13.47%. The zirconia crystals were confirmed to have cubic structure with Face-centered lattice(Z=4), space group Fm3m ($CaF_2$-type structure) and unit cell parameters are a=5.157 $\AA$. The optimal growing conditions for yttria-stabilized zirconia are 50 kW, 2.94 MHz in power and to use a crucible with 105 mm $\times$ 135 mm in size. When the lowering speed of the crucible was set 16mm/hr gave the best yield, 42%. Since the refractive index(2.15~2.18) of cubic zirconia is smaller than that of diamond, the angle between crown and pavilion should be fashioned to make it smaller than $40.5^{\circ}$ to show the maximum brilliancy and fire.

• Korean Journal of Geomatics
• /
• v.1 no.1
• /
• pp.61-67
• /
• 2001

This study aims to develop the Extended Urban Land Information System (EULIS) which can support the sustainable urban management. Although the existing Urban Land Use Information system (ULUIS) that aids the micro-level land use information is a good means for the understanding of urban spatial structure and district-level planning and management (such as urban design, redevelopment planning and district-level transportation planning, etc.), it has some limitations in supplying the information for sustainable urban management, such as environmental and traffic analysis, urban infrastructure's carrying capacity analysis, etc. The EULIS is designed to efficiently supply the information for sustainable urban management. For the successful construction of EULIS, the followings have to be considered. 1) the integration of topographic maps which contain the building's footprints and cadastral maps which contain the parcel's boundary, 2) the integration of EULIS and FM (Facility Management) system for the full utilization of information about capacity analysis of infrastructure, 3) the construction of standardized georeferencing system and spatial unit for the combined use of environment and traffic census data. This study shows 1) why EULIS is needed for the sustainable urban management and which elements are needed for the system,2) the E-R data model for the EULIS, 3) the strategies for the construction of EULIS and 4) the conclusion.

• Journal of Astronomy and Space Sciences
• /
• v.19 no.4
• /
• pp.305-318
• /
• 2002

We have constructed two flight models of airglow photometer system (AGP) to be onboard Korea Sounding Rocket-III (KSR-III) for detection of MUV dayglow above the Korean peninsular. The AGP system is designed to detect dayglow emissions of OI 2972${\AA}$, $N_2$ VK(0,6) 2780${\AA}$, $N_2$ 2PG 3150${\AA}$ and background 3070${\AA}$ toward the horizon at altitudes between 100 km and 300 km. The AGP system consists of a photometer body, a baffle an electronic control unit and a battery unit. The MUV dayglow emissions enter through a narrow band interference filter and focusing lens of the photometer, which contains an ultraviolet sensitive photomultiplier tube. The photometer is equipped with an in-flight calibration light source on a circular plane that will rotate at the rocket's apogee. A bane tube is installed at the entry of the photometer in order to block strong scattering lights from the lower atmosphere. We have carried out laboratory measurements of sensitivity and in-flight calibration light source for the AGP flight models. Although absolute sensitivities of the AGP flight models could not be determined in the country, relative sensitivities among channels are well measured so that observation data during rocket flight in the future can be analyzed with confidence.

• Asian-Australasian Journal of Animal Sciences
• /
• v.23 no.9
• /
• pp.1205-1212
• /
• 2010

The aim of the present study was to evaluate the effects of replacing 70% of the protein from fish meal by protein from ensiled or dry cassava leaves and sweet potato vines on the performance and carcass characters of growing F1 (Large White${\times}$Mong Cai) pigs in Central Vietnam. Twenty-five crossbred pigs (Large White${\times}$Mong Cai) with an initial weight of 19.7 kg (SD = 0.84) were allocated randomly to five treatment groups with 5 animals per group (3 males and 2 females). Pigs were kept individually in pens ($2.0{\times}0.8\;m$) and fed one of five diets over 90 days. The control diet was formulated with fish meal (FM) as the protein source while the other four diets were formulated by replacing 70% of fish meal protein by protein from ensiled cassava leaves (ECL), dry cassava leaves (DCL), dry sweet potato vines (DSPV) or ensiled sweet potato vines (ESPV). Animals were fed their diets at 4% of BW. Results showed that final BW, ADG, DMI and feed conversion ratio (FCR) among the experimental treatments were not significantly different (p>0.05). ECL or DCL and ESPV reduced feed cost per unit gain by 8-17.5% compared to the fish meal diet. There were no significant differences in carcass characters among the diets (p>0.05). Lean meat percentages and protein deposition ranged 41.5-45.8% and 40.2-52.9 g/d, respectively. Using ensiled or dry cassava leaves and sweet potato vine can replace at least 70% of the protein from fish meal (or 35% of total diet CP) without significant effects on performance and carcass traits of growing (20-65 kg) pigs. Including cassava leaves and sweet potato vines could improve feed cost and therefore has economic benefits.

• Journal of the Korean Academy of Clinical Electrophysiology
• /
• v.3 no.1
• /
• pp.49-59
• /
• 2005

This study assigns each 8 of 24 normal persons to control group(Group I), strength increase group(Group II) and endurance increase group(Group III) to analyze differences in changes of strength and endurance with surface electromyography and kinetics according to application modes of neuromuscular electrical stimulation(NMES). Group I had not any treatment, group II performed 15 repeated contraction with 60% intensity of maximal voluntary isometric contraction(MVIC) by setting 10-sec on time and 50-sec off time and group III conducted 30 repeated contraction with 30% intensity of MVIC by setting 10-sec on time and 20-sec off time. For neuromuscular electrical stimulation, 2,500 Hz of Russian current, 35 pps of pulse rate and 200 of pulse width. Neuromuscular electrical stimulation was conducted by five times for total 4 weeks. Before and after experimentmotor unit action potential of vastus medialis, rectus femoris and vastus lateralis were measured with sEMG, median frequency(MDF) was analyzed, and thus the following results were obtained. There was significant difference in the period of measuring vastus medialis and rectus femoris in change of MDF and interaction among groups with analysis of surface electromyography before and after neuromuscular electrical stimulation(p<.001) and in particular, there was a remarkable change among groups according to the period of measurement. In conclusion, NMES influenced changes of strength and endurance according to its application modes and in particular, it was found that strength increment application had a significant influence on strength increment in applying short-time NMES.

• Korean Institute of Interior Design Journal
• /
• v.24 no.5
• /
• pp.117-127
• /
• 2015

This paper depicts a case study of the BIM (Building Information Modeling)-enabled evaluation of design alternatives for an actual remodeling project in Yeongwol, Korea. The increase of urban population and income followed by the growth of economy has derived massive supply of grand scale housing project in Korea since 1970s. Consequently, building remodeling became one of the feasible resolutions for renovating such old housings in these days. This paper aims to introduce a technical approach to such remodeling projects based on BIM-enabled applications focusing on quantitative analysis of design alternatives. Among the technical issues of such building remodeling projects, this paper focuses on the BIM-enabled area analysis and comparison between design alternatives to support decision-making even in early phase of remodeling design process. BIM and its variety of applications have broadly influenced the domain of AEC-FM (Architecture, Engineering, Construction, and Facility Management) within the lifecycle of buildings. As one of the applications facilitated by BIM, the automated area calculation and scenario-based comparison between alternatives can play an important role in the early phase of remodeling project. We modeled three design alternatives (buildings) and three housing modules (units) based on the actual case in Yeongwol city, Korea using a BIM design authoring tool. Nine combinatorial BIM models were demonstrated for the BIM-enabled review process described in this paper. To determine the most optimal design scenario among nine alternatives, this paper demonstrates a result of the conducted spatial program review. The main subject includes specific spatial program issues on; 1) the number of unit spaces; and 2) area of individual/grouped and private/shared spaces.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.9 no.1
• /
• pp.1-8
• /
• 2008

We propose how to program the off-line buffing robot path along shoes' outsole shape in the footwear buffing process by a 5-axis microscribe system like robot mechanism. The microscribe system we developed consists of a 5-axis robot link with a turn table, a signal processing unit, PC and an application software program. Itmakes a robot path on the shoes' upper in accordance with the movement of a microscribe with many joints. The developed system calculates the encoder pulse values for the microscribe arm's rotation and transmits the angle pulse values to the PC through a processing unit. Denavit-Hartenberg's(D-H) direct kinematics is used to make the global coordinate from microscribe joint one. Problems with the microscribe's kinematics can be solved efficiently and systematically by D-H representation. With the coordinate values calculated by D-H equation, our system can draw a buffing gauge-line on the upper sole. We obtain shoes' outline points, which are 2 outlines coupled with the points and the normal vector based on the points. By applying the system to the buffing robot in a flexible manufacturing system, it can be used effectively to program the path of a real buffing robot.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.65 no.2
• /
• pp.113-123
• /
• 2020

Global climatic change and increasing climatic instability threaten crop productivity. Due to climatic change, drought stress is occurring more frequently in crop fields. In this study, we investigated the effect of treatment with hydrogen peroxide (H₂O₂) before leaf development on the growth and yield of sorghum for minimizing the damage of crops to drought. To assess the effect of H₂O₂ on the growth of sorghum plant, 10 mM H₂O₂ was used to treat sorghum leaves at the 3-leaf stage during growth in field conditions. Plant height, stem diameter, leaf length, and leaf width were increased by 7.6%, 9.6%, 8.3% and 11.5%, respectively. SPAD value, chlorophyll fluorescence (Fv/Fm), photosynthetic rate, stomatal conductance, and transpiration rate were increased by 3.0%, 4.9%, 26.0%, 23.4% and 12.7%, respectively. The amount of H₂O₂ in the leaf tissue of sorghum plant treated with 10 mM H₂O₂ was 0.7% of the applied amount after 1 hour. The level increased to approximately 1.0% after 6 hours. The highest antioxidant activity measured by the Oxygen Radical Absorbance Capacity assay was 847.3 µmol·g^-1 at 6 hour after treatment. However, in the well-watered condition, the concentration of H₂O₂ in the plant treated by the foliar application of H₂O₂ was 227.8 µmol·g^-1 higher than that of the untreated control. H₂O₂ treatment improved all the yield components and yield-related factors. Panicle length, plant dry weight, panicle weight, seed weight per plant, seed weight per unit area, and thousand seed weight were increased by 8.8%, 18.0%, 24.4%, 24.7%, 29.9% and 7.1%, respectively. Proteomic analysis showed that H₂O₂ treatment in sorghum increased the tolerance to drought stress and maintained growth and yield by ameliorating oxidative stress.

• Journal of the Korean association of regional geographers
• /
• v.17 no.2
• /
• pp.231-244
• /
• 2011

This study is to examine how activities using local multi -cultural resources and world geography lessons using the CCAP(Cross-Cultural Awareness Programme) affect students' multi-cultural understanding. Activities using local multi-cultural resources were carried by visiting in an alien worker community, volunteering in multicultural center, attending on UNESCO ASP(Associated School Program), and making radio broadcasting program associated with 'SCN FM' which is a local broadcasting station on the weekend. And world geography lessons using the CCAP were conducted with 5 classes including orientation by inviting foreign instructors from that place after reconstructing the Southeast and South Asia unit of the countries such as Pakistan, the Philippines, Myanmar and Cambodia. According to twice questionnaire survey conducted before and after activities using local multi-cultural resources and world geography lessons using the CCAP, it appeared that students had familiarity more than before through direct meeting with foreigners inside and outside classroom, and understood and respected other cultures by acquiring contextual regional knowledge. In the end, multi-cultural activities and world geography lessons using the CCAP contributed to students' global citizenship, which overcame prejudice toward third world cultures. Like that, if world geography classes provide continually students with opportunities to experience directly diverse cultures inside and outside classroom, world geography overcome negative image that it transmit decontextual regional knowledge and is regarded as the subject that is very fit for nurturing global citizenship based on contextual knowledge, consideration and tolerance needed in global and multi-cultural society.