• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 2006년도 Extended Abstracts of 2006 POWDER METALLURGY World Congress Part2
• /
• pp.946-947
• /
• 2006

Driven by the unavailibility of commercial test equipment for tensile and creep testing at temperatures up to $3000^{\circ}C$ a measuring system has been developed and constructed at the University of Applied Sciences, Jena. These temperatures are reached with precision by heating samples directly by electric current. Contact-less strain measurements are carried out with image processing software utilizing a CCD camera system. This paper covers results of creep tests which have been conducted on TZM sheet material (thickness 2 mm) in different heat-treatment conditions in the temperature range between $1200^{\circ}C$ and $1600^{\circ}C$.

• 대한치과교정학회지
• /
• 제21권3호
• /
• pp.581-590
• /
• 1991

This study was carried out for the comparison of the head postures between mouth breathers and normal nasal breathers. For this purpose, a test group of 28 mouth breathers, between the ages of 8 to 12 years old and a control group of 25 nasal breathers were used. Following results were obtained after comparing the craniofacial and craniocervical angulations to the True Vertical line. 1. In the comparisions relating to the True Vertical Line, results were obtained using four items; NSL/VER, FH/VER, NL/VER, PMV/VER. Variations were observed in all the items and the craniofacial angulations in the mouth breathers group showed more superior position compared to the control group. 2. In the comparisions relating to the craniocervical angulations, results were obtained using four items; NSL/OPT, FH/OPT, NL/OPT, PMV/OPT. Variations between the two groups were observed only in the PMV/OPT item and the mouth breather group showed more craniocervical angulations compared to the control group.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2015년도 춘계 학술논문 발표대회
• /
• pp.48-49
• /
• 2015

High-calcium fly ash (FH) is widely used as mineral admixtures in concrete industry. In this paper, a hydration model is proposed to describe the hydration of high-calcium fly ash blended-cement. This model takes into account the hydration reaction of cement, the chemical reaction of fly ash, and reaction of free CaO in fly ash. Using the proposed model, the development of compressive strength of FH blended concrete is predicted using the amount of calcium silicate hydrate (CSH). The agreement between simulation and experimental results proves that the new model is quite effective.

• KIEAE Journal
• /
• 제13권3호
• /
• pp.121-128
• /
• 2013

There is a rental housing policy in Korea to support low income citizen. However, the living condition of tenants through this rental program is not work for improving, unlike the initial purpose of providing rental housings. Rental housings, which were planned to improve the residential welfare and enhance self-reliance ability of low income groups and the elderly. It's not effective any more in terms of policy purpose. To solve this problem, plans are needed to support for the construction by Farm-Housing(FH) so that the residents of can support their self-reliance by promoting creating jobs and cooperation. This paper analyze and propose some solution in terms of legal system, financing and streamlining of planing process and permission to support FH program. The paper focus purpose to help identify a new area through such proposals and retain a power of leading technology by bridging the gap between the realistic aspect and ideal aspect.

• 위성통신과 우주산업
• /
• 제8권1호통권18호
• /
• pp.56-68
• /
• 2000

• Imaging Science in Dentistry
• /
• 제34권1호
• /
• pp.7-12
• /
• 2004

Purpose: To investigate the anatomical structure of the incisive canal radiographically by a cone beam computed tomography. Materials and Methods: 38 persons (male 26, female 12) were chosen to take images of maxillary anterior region in dental CT mode using a cone beam computed tomography. The tube voltage were 65, 67, and 70kVp, the tube current was 7 mA, and the exposure time was 13.3 seconds. The FH plane of each person was parallel to the floor. The images were analysed on the CRT display. Results: The mean length of incisive canal was 15.87 mm±2.92. The mean diameter at the side of palate and nasal fossa were 3.49 mm±0.76 and 3.89 mm± 1.06, respectively. In the cross-sectional shape of incisive canal, 50% were round, 34.2% were ovoid, and 15.8% were lobulated. 87% of incisive canal at the side of nasal fossa have one canal, 10.4% have two canals, and 2.6% have three canals, but these canals were merged into one canal in the middle portion of palate. The mean angles of the long axis of incisive canal and central incisor to the FH plane were 110.3°±6.96 and 117.45°±7.41, respectively. The angles of the long axis of incisive canal and central incisor to the FH plane were least correlated (r= 0.258). Conclusion : This experiment suggests that a cone beam computed radiography will be helpful in surgery or implantation on the maxillary incisive area.

• 대한치과교정학회지
• /
• 제25권6호
• /
• pp.665-674
• /
• 1995

The purpose of this study is to investigate the cephalometric characteristics of the open-bite patients with DJD of TMJ. The DJD open-bite cases were compared with normal samples and Class II open-bite cases with normal TMJ respectively. Twenty three open-bite patients with bilateral DJD of TMJ($13.9\~35.3$ yens old, Group I) were selected from the Department of Orthodontics, SNUDH. Group ll consisted of thirteen Class II open-bite cases($13.2\~27.4$ years old) with no TMD signs/symtoms and good condylar shapes. Group III samples were the forty eight healthy dental students who have Class I molar relationships with no history of orthodontic treatment, good facial balance and no TMD symptoms($20.0\~26.8$ years old). First, sixty measurements in the lateral cephalometric radiographs and analysis of variance(P<0.05, Scheffe) were used to compare these three groups. The seven measurements showed significant difference(p<0.05) between Group I and Group II. After analysis of variance, six of them were used for the discriminant analysis(Wilks' stepwise analysis) and the discrminant function for Group I/Group II was obtained. The results and conclusions were as follows : In most of the measurments, Group I and Group II showed the same skeletal and dental characteristics. But seven of the sixty measurements(FH-PP angle, SNB, FH-ArGo angle, articulare angle, genial angle, upper gonial angle and Ar-Go length) were significantly different(p<0.05) between Group I and Group II. These differences may be explained by the fact that in DJD cases the mandible rotated backward due to the shortening of the ramus following the degenerative destruction of condylar head and its surrounding structures. The resulting discriminant function was : $D={-0.120X}_1+{0.066X}_2+{0.144X}_3-{0.058X}_4+2000,\;where\;X_1=ArGo\;length(mm),\;X_2=SArGo\;angle(degree),\;X_3=FH-PP\;angle(degree),\;X_4=Gonial\;angle(degree)$. Mean of the group centroids was -0.555 and percent of the 'grouped' cases correctly classified was $88.89\%$.

• 한국축산식품학회지
• /
• 제35권2호
• /
• pp.171-178
• /
• 2015

This study aimed to investigate the effects of Lactobacillus plantarum FH185 on the reduction of adipocyte size and gut microbial changes in mice with diet-induced obesity. The strain was found to have a lipase inhibitory activity of 70.09±2.04% and inhibited adipocyte differentiation of 3T3-L1 cells (18.63±0.98%) at a concentration of 100 µg/mL. To examine the effect of the strain supplementation on gut microbial changes in mice with diet-induced obesity, male C57BL/6J mice were fed on four different diets (i.e., A, normal diet (ND); B, high-fat diet (HFD); C, HFD with ABT-3 (10⁹ CFU/day); and D, HFD with L. plantarum FH185 (10⁹ CFU/day)) for 6 wk. According to the results of fecal pyrosequencing, the ratio of Firmicutes to Bacteroidetes in groups C and D was lower than in the control groups at the phylum level. At the family level, Lactobacillaceae in groups C and D was observed to dominate, while Lachnospiraceae in groups A and B was observed to dominate. At the genus level, Lactobacillus in groups C and D was comparatively higher than in groups A and B. To examine the effects of strain supplementation on the reduction of adipocyte size, the left and right epididymal fat pads were quickly isolated after the animals were sacrificed, and the adipocyte sizes were measured. In groups A, C and D, the percentage of 2,000 m² of adipocyte was higher than in the other size of adipocyte, while the percentage of over 5,000 m² of adipocyte was highest in group B. The mean adipocyte size of group D was significantly larger than that of group A, but smaller than that of group B.

• 한국전자통신학회논문지
• /
• 제3권2호
• /
• pp.58-64
• /
• 2008

본 논문에서는 industrial, scientific, medical (ISM) 대역의 효율적인 운용을 위해 간섭시나리오와 monte-carlo method 기반의 간섭분석 methodology를 제안하였다. 간섭시나리오는 거리와 밀도에 따른 시나리오로 구분되며, 희생원을 victim receiver (Vr), 간섭원을 interfering transmitter (It)로 정의한다. 간섭분석 시뮬레이션은 Vr의 간섭허용치를 만족하는 It의 간섭유효구간을 통해 얻어지는 유효간섭영역 내에서 It의 분포밀도에 따른 간섭 확률을 도출하게 된다. 제안된 간섭시나리오를 적용하여 2.4GHz ISM 대역에서 사용되는 대표적 무선설비인 WLAN (Vr)과 bluetooth (It)의 시뮬레이션 결과 간섭유효구간은 60~400m 이며, WLAN은 유효간섭영역에 존재하는 6개의 bluetooth와 간섭허용치를 만족하는 범위 내에서 운용될 수 있음을 확인하였다. 또한, 같은 조건에서 frequency hopping (FH) 통신방식을 사용하는 bluetooth에 cognitive radio(CR) 기술 기반의 listen before talk (LBT) 방식을 적용시 간섭 확률은 크게 감소하였다. 컴퓨터 시뮬레이션은 european radiocommunications office (ERO)에서 monte-carlo method를 기반으로 개발한 spectrum engineering advanced monte carlo analysis tool (SEAMCAT)을 사용하였다.

• 대한전자공학회논문지TC
• /
• 제43권10호
• /
• pp.46-54
• /
• 2006

본 논문에서는 기존의 아날로그 트랜시버가 가지고 있는 단점을 극복하기 위한 디지털 트랜시버를 제안한다. 제안된 트랜시버는 불연속적인 협대역 채널들로 구성된 환경에서 사용된다고 가정하였다. 그리고 어느 정도의 보안성을 가지며 개인 대(對) 개인뿐만 아니라, 개인 대(對) 그룹, 그룹 대(對) 그룹의 음성 및 데이터 통신이 가능하여야 하며, 음성과 데이터를 동시에 전송할 경우 1 Mbps의 데이터 율을 가져야 한다고 가정하였다. 주파수 대역의 제한 때문에 FH-SS(Frequency Hopping-Spread Spectrum) 방식을, 구현의 복잡성 때문에 D8PSK(Differential 8 Phase Shift Keying) 방식을 채택하였다. 반송파와 심볼 타이밍 복원을 위해 IEEE 802.11 FHSS 프레임 구조를 바탕으로 새로운 프리앰블 구조를 제안하여 검출 확률을 높였다. 전산 모의 실험과 전력 계산을 통하여 제안된 시스템은 아날로그 워키토키와 같은 간단한 무선 통신에 사용될 수 있음을 보였다.