• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2008.10a
• /
• pp.265-269
• /
• 2008

Home health care with compact wearable units sounds to be a convenient solution for the elderly people living independently. This paper presents a method to detect fall from the other activities of daily living and also to classify those activities. This kind of ambulatory monitoring enables them to get an emergency help in the case of the fatal fall event and can provide their general health status by observing the activities being performed in daily life. A tri-axial accelerometer sensor is used to get the acceleration anomalies associated with the user's movements. The three axis acceleration data are transferred to the base station sensor node via an IEEE 802.15.4 compliant zigbee module. The base station sensor node sends the data to base station PC for an offline processing. This work shows the feature set preparation using the principal component analysis (PCA) for the designing of neural network. The work includes the most common activities of daily living (ADL) like Rest, Walk and Run along with the detection of fall events from ADL. The angle from the vertical is found to be the most significant feature parameter for classification of fall while mean, standard deviation and FFT coefficients were used as the feature parameter for classifying the other activities under consideration. The accuracy for detection of fall events is 86%. The overall accuracy for ADL and fall is 94%.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.8C
• /
• pp.822-829
• /
• 2009

This paper proposes a new method of improving the quality of High Efficiency Advanced Audio Coding (HE-AAC). HE-AAC encodes input source by allocating bits for each scalefactor bands appropriately according to human ear's psychoacoustic property. As a result, insufficient bits are assigned to the bands which have relatively low energy. This imbalance between different energy bands can cause decreasing of sound quality like musical noise. In the proposed system, a Linear Prediction (LP) module is combined with HE-AAC as a pre-processor to improve sound quality by even bits distribution. To apply accurate human being's psychoacoustic property, the psychoacoustic model uses Fast Fourier Transform (FFT) spectrum of original input signal to make masking threshold. In its implementation, masking threshold of psychoacoustic model is normalized using the LP spectral envelope in prior to quantization of the LP residual. Experimental result shows that, the proposed algorithm allocates bits appropriately for insufficient bits condition and improves the performance of HE-AAC.

• Journal of the Society of Disaster Information
• /
• v.16 no.1
• /
• pp.144-154
• /
• 2020

Purpose: This paper is a fundamental study on the applicability of the smart bolt developed for monitoring system to detect the leakage of water supply valve. Method: A leak detection experiments were conducted using the smart bolt having embedded strain sensors and accelerometer. The smart bolt used in study meets the allowable criteria of torque and tensile stress for water supply system, and it can be applied to a joint of the water supply valve by behaving well within the allowable limits. Result: As a result of the simulated leak tests, a leak signal at the valve leak point was detected in a band of 60Hz, and the main pipe leaking point was observed to produce a leak signal having much higher frequency than that of the valve leak point. This seems to result in a total coupled vibration under unconfined conditions of the pipes. Conclusion: The smart bolts appeared applicable to detecting a leaking signal from the water supply valve.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.10 no.6
• /
• pp.823-829
• /
• 1986

The Large-scale structure of the circular jet in the transition region, which influences the subsequent flow in the turbulent region, was studied experimentally. Measuring equipments are composed of the two channel hot-wire anemometer, the computer controlled two-directional traverse mechanism, the data acquisition system, and FFT-analyzer. The circular jet has 50mm diameter. The mean velocity distribution, the velocity fluctuation, the auto 'cross correlations and the power spectra were acquired at moderate Reynolds number of 10$^{4}$. And the VITA method was used to measure the convection velocity of Large-scale eddy. The phase of u'is in advance of that of v'in all regions. .over bar. $R_{u}$(.tau.=0) is approximately zero in the potential core region, but a small regular deviation is observed. At a position in the mixing layer region the convection velocity is different along the part of the eddy, and in this experiment the convection velocity of the inner region is larger than the outer region. The averge convection velocity of the eddy along y/D=0 was approximately constant in the transition region.D=0 was approximately constant in the transition region.

• Publications of The Korean Astronomical Society
• /
• v.24 no.1
• /
• pp.65-81
• /
• 2009

We present the performance test results of VLBI Correlation Subsystem (VCS) trial product which was being developed for 1 year from August 2007. It is a core component of Korea-Japan Joint VLBI Correlator (KJJVC). The aim for developing VCS trial product is to improve the performance of VCS main product to reduce the efforts and cost, and to solve the design problems by performing the preliminary test of the manufactured trial product. The function of VCS trial product is that it is able to process the 2 stations-1 baseline, 8 Gbps/station speed, 1.2 Gbps output speed with FX-type. VCS trial product consists of Read Data Control Board (RDC), Fourier Transform Board (FTB), and Correlation and Accumulation Board (CAB). Almost main functions are integrated in the FTB and CAB board. In order to confirm the performance of VCS trial product functions, the spectral analysis, delay compensation and correlation processing experiments were carried out by using simulation and real observation data. We found that the overflow problem of re-quantization after FFT processing was occurred in the delay compensation experiment. We confirmed that this problem was caused by valid bit-expression of the re-quantized data. To solve this problem, the novel method will be applied to VCS main product. The effectiveness of VCS trial product has been verified through the preliminary experimental results, but the overflow problem was occurred.

• Journal of the Institute of Convergence Signal Processing
• /
• v.5 no.4
• /
• pp.281-286
• /
• 2004

The wear process of end mill is a so complicated process that a more reliable technique is required for the monitoring and controling the tool life and its performance. This research presents a new tool wear monitoring method based on the sound signal generated on the machining. The experiment carried out continuous-side-milling for using the high-speed steel end mill under wet condition. The sound pressure was measured at 0.5m from the cutting zone by a dynamic microphone, and was analyzed at frequency domain. The tooth passing frequency appears as a harmonics form, and end mill wear is related with the first harmonic. It can be concluded from the result that the tool wear is correlate with the intensity of the measured sound at tooth passing frequency estimation of end mill wear using sound is possible through frequency analysis at tooth passing frequency under the given circumstances.

• Korean Journal of Veterinary Research
• /
• v.45 no.1
• /
• pp.131-137
• /
• 2005

To assess anesthetic depth using quantitative electroencephalography (q-EEG), we recorded processed EEG (raw EEG) till 100 minutes in beagle dogs anesthetized for 60 minutes with tiletamine/zolazepam (n=5, TZ group), xylazine/ketamine (n=5, XK group) and propofol (n=5, PI group) by intermittent bolus injection. Raw EEG was converted into 95% spectral edge frequency (SEF) and median frequency (MF) through fast fourier transformation (FFT) method. 95% SEF value of TZ group was significantly higher (p<0.05) than the XK group from 10 minutes to 100 minutes. 95% SEF value of PI group was significantly higher (p<0.05) than the XK group from 10 minutes to 40 minutes, and significantly low (p<0.05) than XK group at 90 and 100 minutes. MF was significantly higher (p<0.05) in TZ group from 60 minutes to 100 minutes. Based on these results, using dissociative agent with ${\alpha}_2$-adrenergic agent is more potent in CNS depressed than using dissociative agent alone, and low doses of propofol has a disinhibitory effect on CNS.

• Journal of Positioning, Navigation, and Timing
• /
• v.10 no.1
• /
• pp.1-12
• /
• 2021

Due to the Global Navigation Satellite System (GNSS) modernization, the recently launched GNSS satellites transmit signals at various frequency bands of L1, L2 and L5. Considering the Korea Positioning System (KPS) signal and other GNSS augmentation signals in the future, there is a high probability of applying more complex communication techniques to the new GNSS signals. For the reason, GNSS receivers based on flexible Software Defined Radio (SDR) concept needs to be developed to evaluate various experimental communication techniques by accessing each signal processing module in detail. In this paper, we introduce a multi-constellation (GPS/Galileo/BeiDou) multi-band (L1/L2/L5) SDR by utilizing Ettus USRP N210. The signal reception module of the developed SDR includes down-conversion, analog-to-digital conversion, signal acquisition, and tracking. The down-conversion module is designed based on the super-heterodyne method fitted for MHz sampling. The signal acquisition module performs PRN code generation and FFT operation and the signal tracking module implements delay/phase/frequency locked loops only by software. In general, it is difficult to sample entire main lobe components of L5 band signals due to their higher chipping rate compared with L1 and L2 band signals. Experiment result shows that it is possible to acquire and track the under-sampled signals by the developed SDR.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.18 no.3
• /
• pp.84-92
• /
• 2014

In this study, vibrational tendon tension measurement methods are applied to estimate tension of external tendons used in segmental post-tensioned bridges. The acceleration of various length type of tendons is measured and natural frequencies are obtained using FFT (Fast Fourier Transform). The obtained natural frequencies are within 1% error regardless of sensor direction and location. On the basis of natural frequency of tendon, estimation of the tendon tension is performed by using many types of solutions such as string theory equation, multi mode estimation, practical formula estimation and stiff string with clamped-clamped boundary conditions. The results are compared with each other and have shown that the flexural stiffness is not negligible in tendons of this type causing the vibration mode to be inharmonically related. The results have shown that the method using stiff string equation with clamped-clamped boundary conditions is more accurate than the other methods. Application example of in-service bridges has shown that force distribution effects from friction at deviation blocks can be effectively detected.

• Journal of the Korean Geotechnical Society
• /
• v.38 no.12
• /
• pp.91-101
• /
• 2022

The 1995 Kobe earthquake caused a massive damage to the Port of Kobe. Therefore, it was pointed out that it was impossible to design port structures for Level II (Mw 6.5) earthquakes with quasi-static analysis and Allowable Stress Design methods. In Japan and the United States, where earthquakes are frequent, the most advanced design standards for port facilities are introduced and applied, and the existing seismic design standards have been converted to performance-based design. Since 1999, the Korean Port Seismic Design Act has established a definition of necessary facilities and seismic grades through research on facilities that require seismic design and their seismic grades. It has also established a performance-based seismic design method based on experimental verification. In the performance-based seismic design method of the breakwater proposed in this study, the acceleration time history on the surface of the original ground was subjected to a fast Fourier transform, followed by a filter processing that corrected the frequency characteristics corresponding to the maximum allowable displacement with respect to performance level of the breakwater and the filtered spectrum. The horizontal seismic coefficient for the equivalent static analysis considering the displacement was calculated by inversely transforming (i.e., subjected to an inverse fast Fourier transform) into the acceleration time history and obtaining the maximum acceleration value. In addition, experiments and numerical analysis were performed to verify the performance-based seismic design method of breakwaters suitable for domestic earthquake levels.