• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제49권6호
• /
• pp.411-420
• /
• 2000

The energy storage systems are being widely researched for the high quality of the electric power. The FES(flywheel energy system) is especially, on the center of the research because it does not make any pollution and its life is long. The FES converts the electrical energy into the mechanical kinetic energy of the flywheel and reconverts the mechanical energy into the electrical energy. In order to store as much energy as possible, the flywheel is supposed to be rotated with very high speed. The motor/generator of the FES should be high efficient at high speed, and generate constant torque with respect to the rotation. In this paper, a motor/generator employing a Halbach array of permanent magnets is designed and constructed to meet the requirements, and its characteristics are examined. The magnetic field is analysed by using the magnetic surface charge method. The armature winding is designed for the harmonic components to be minimized by using the FFT. The sinusoidal current for the motor driving are generated by the hysteresis current controller. A sample superconducting flywheel energy storage system is constructed with a duralumin flywheel which has a maximum rotating speed of 40,000[rpm] and a stored energy of 240[Wh] and its validity is examined through the experiment.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2008년도 춘계학술대회논문집
• /
• pp.425-430
• /
• 2008

To verify the system performance of portable AE leak diagnosis system which can measure with moving conditions, AE activities such as RMS voltage level, AE signal trend, leak rate degree according to AE database, FFT spectrum were measured during operation on total 11 valves of the secondary system in nuclear power plant. AE activities were recorded and analyzed from various operating conditions including different temperature, type of valve, pressure difference, valve size and fluid. The results of this field study are utilized to select the type of sensors, the frequency band for filtering and thereby to improve the signal-to-noise ratio for diagnosis for diagnosis or monitoring of valves in operation. As the final result of application study above, portable type leak diagnosis system by AE was developed. The outcome of the study can be definitely applied as a means of the diagnosis or monitoring system for energy saving and prevention of accident for power plant valve. The purpose of this study is to verify availability of the acoustic emission in-situ monitoring method to the internal leak and operating conditions of the major valves at nuclear power plants. In this study, acoustic emission tests are performed when the pressurized temperature water and steam flowed through glove valve(main steam dump valve) and check valve(main steam outlet pump check valve) on the normal size of 12 and 18 ". The valve internal leak monitoring system for practical field was designed. The acoustic emission method was applied to the valves at the site, and the background noise was measured for the abnormal plant condition. To improve the reliability, a judgment of leak on the system was used various factors which are AE parameters, trend analysis, frequency analysis, voltage analysis and amplitude analysis of acoustic signal emitted from the valve operating condition internal leak.

• 전기학회논문지
• /
• 제62권3호
• /
• pp.355-364
• /
• 2013

Respect to the input AC voltage and output DC voltage, conventional three-phase PWM rectifier is classified as the voltage type rectifier with boost capability and the current type rectifier voltage with buck capability. Conventional PWM rectifier can not at the same time the boost and buck capability and its bridge is weak in the shoot- through state. These problems can be solved by Z-source PWM rectifier which has all characteristic of voltage and current type PWM rectifier. By shoot-through duty ratio control, the Z-source PWM rectifier can buck and boost at the same time, also, there is no need to consider the dead time. This paper proposes the input AC voltage sensorless control method of a three-phase Z-source PWM rectifier in order to accomplish the unity input power factor and output DC voltage control. The proposed method is estimated the input AC voltage by using input AC current and output DC voltage, hence, the sensor for the input AC voltage detection is no needed. comparison of the estimated and detected input AC voltage, estimated phase angle of the input voltage, the output DC voltage response for reference value, unity power factor, FFT(Fast Fourier Transform) of the estimated voltage and efficiency are verified by PSIM simulation.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2006년도 International Symposium on GPS/GNSS Vol.2
• /
• pp.229-234
• /
• 2006

Acquisition is to detect the presence of the GPS signal. Once the signal is detected, the estimated frequency and code phase are passed to a tracking loop to demodulate the navigation data. In order to detect the weak signal, multiple length of data integration is always needed. In this paper, we present five different acquisition approaches based on circular correlation and Fast Fourier Transform (FFT), using coherent as well as non-coherent integration techniques for the multiple length of collected GPS satellite signal. Moreover a general approach of determining the acquisition threshold is introduced based on noise distribution which has been proved effective, and independent of the hardware. In the end of this paper, the processing speed and acquisition gain of each method are illustrated, compared, and analyzed. The results show that coherent approach is much more time consuming compared to noncoherent approaches, and in the case of multiple length of data integration from 2ms to 8ms, the processing times consumed by the fastest non-coherent acquisition method are only 25.87% to 1.52% in a single search, and 34.76% to 1.06% in a global search of those in the coherent acquisition. However, coherent acquisition also demonstrates its better performance in the acquisition gain, and in the case of 8ms of data integration it is 4.23 to 4.41 dB higher than that in the non-coherent approaches. Finally, an applicable scheme of combining coherent and non-coherent acquisition approaches in the development of a real-time Software GPS receiver in the University of Tokyo is provided.

• Journal of Astronomy and Space Sciences
• /
• 제19권4호
• /
• pp.327-340
• /
• 2002

본 연구에서는 전파천문 관측연구 분야에서 외부은하의 스펙트럼 선 관측연구와 특정 전파원의 조사 관측을 위해서 필요한 광대역 디지털 자기상관분광기 시스템을 연구 개발하기 위 한 설계 연구를 수행하였다. 본 연구에서 설계되는 자기상관분광기는 기존의 시스템과는 달리 신호 입력에 대한 입력전력의 동적 범위와 입력 주파수 범위를 확대하여 어떤 시스템의 전파 분광기로도 자유롭게 사용할 수 있도록 하였다. 또한 신호의 샘플링 방식 또한 일반의 신호 검출기와는 다르게 aliasing 샘플링 방식을 사용하여, 대역 손실을 최소화하고 있으며, 상관기를 통과한 신호에 대해서는 전용의 DSP소자를 이용하여, 적분 및 퓨리에 변환 등을 하드웨어적으로 처리하도록 하여 그 신호 처리속도를 빠르게 설계하여, 최근에 많은 연구가 진행되는 우주전파 관측연구인 “On the fly”방식 등의 측정 방식을 지원할 수 있도록 설계하였다.

• 한국구조물진단유지관리공학회 논문집
• /
• 제20권4호
• /
• pp.27-34
• /
• 2016

시설물의 거동 파악을 위한 대표적인 방법으로는 가속도센서에서 측정되는 동적응답을 이용하여 역해석을 통해 구조변수를 추정하는 방법이 있다. 정확한 구조변수의 추정을 위해서는 최적화된 센서의 위치가 필요한데, 본 논문에서는 다양한 최적 센서위치를 추정하는 방법을 정리하였으며, 기존 시간영역에서만 사용되었던 Hankel matrix법을 주파수영역으로 확대 개발하여 기존 최적 센서위치 추정 방법들과 결과를 비교 분석하였다. 결과 비교 및 검증을 위해 지진동에 의한 동적 해석을 수행하여 기존 및 새로운 방법으로 선택된 최적 센서위치 에서의 가속도데이터를 활용하여 FFT(Fast Fourier Transform)를 통해 진동 형상의 크기를 구하고, spline function으로 전체 자유도에 대한 진동 형상을 추정하였으며, 추정된 진동 형상과 해석적으로 구해진 진동 형상과의 MAC 지수를 통하여 다양한 방법들의 모드 추정의 정확도를 비교하였다.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제12권1호
• /
• pp.102-115
• /
• 2020

In this study, the SST k - ω turbulence model and the sliding mesh technology based on RANS method have been adopted to simulate the exciting force and hydrodynamic of a pump-jet propulsor in different oblique inflow angle (0°, 10°, 20°, 30°) and different advance ratio (J = 0.95, J = 1.18, J = 1.58).The fully structured grid and full channel model have been adopted to improved computational accuracy. The classical skewed marine propeller E779A with different advance ratio was carried out to verify the accuracy of the numerical simulation method. The grid independence was verified. The time-domain data of pump-jet propulsor exciting force including bearing force and fluctuating pressure in different working conditions was monitored, and then which was converted to frequency domain data by fast Fourier transform (FFT). The variation laws of bearing force and fluctuating pressure in different advance ratio and different oblique flow angle has been presented. The influence of the peak of pulsation pressure in different oblique flow angle and different advance ratio has been presented. The results show that the exciting force increases with the increase of the advance ratio, the closer which is to the rotor domain and the closer to the blades tip, the greater the variation of the pulsating pressure. At the same time, the exciting force decrease with the oblique flow angle increases. And the vertical and transverse forces will change more obviously, which is the main cause of the exciting force. In addition, the pressure distribution and the velocity distribution of rotor blades tip in different oblique flow angles has been investigated.

• 한국광학회지
• /
• 제33권3호
• /
• pp.106-112
• /
• 2022

이중 링 add/drop 필터와 all-pass 지연 필터로 구성된 이차원 optical code division multiple access (OCDMA) 인코더/디코더를 제안하고, 설계 예시 및 수치해석을 통하여 실현 가능성을 확인하였다. 제안된 OCDMA 인코더/디코더의 칩 면적은 지연 도파로를 사용하는 기존 OCDMA 인코더/디코더에 비하여 1/3 정도로 줄어든다. 제안된 소자의 성능을 모델링하기 위하여 고속 푸리에 변환(fast Fourier transform, FFT) 및 전달 행렬 기법을 사용하였다. 정확한 코드로 디코딩된 펄스의 중심에서 자기상관 피크 값은 어긋난 파장 호핑 코드 및 스펙트럼 위상 코드로 디코딩된 경우의 최대 교차상관 레벨에 비하여 3배 이상으로 관측되었다. 이를 통하여 forward error correction (FEC) 한계에 해당하는 10^-3 이하의 비트 에러 오율을 얻을 수 있음을 알 수 있다.

• 한국전자통신학회논문지
• /
• 제18권1호
• /
• pp.115-126
• /
• 2023

무작위 및 주기적인 변동하는 재생에너지 발전 전력 품질 교란으로 인해 발전 변환 송전 및 배전에서 더 자주 발생하게 된다. 전력 품질 교란은 장비 손상 또는 정전으로 이어질 수 있다. 따라서 서로 다른 전력 품질 외란을 실시간으로 자동감지하고 분류하는 것이 필요하다. 전통적인 PQD 식별 방법은 특징 추출 특징 선택 및 분류의 세 단계로 구성된다. 그러나 수동으로 생성한 특징은 선택 단계에서 정확성을 보장하기 힘들어서 분류 정확도를 향상하는 데에는 한계가 있다. 본 논문에서는 16가지 종류의 전력 품질 신호를 인식하기 위해 CNN(Convolution Neural Networ)과 LSTM(Long Short Term Memory)을 기반으로 시간 영역과 주파수 영역의 특징을 결합한 심층 신경망 구조를 제안하였다. 주파수 영역 데이터는 주파수 영역 특징을 효율적으로 추출할 수 있는 FFT(Fast Fourier Transform)로 얻었다. 합성 데이터와 실제 6kV 전력 시스템 데이터의 성능은 본 연구에서 제안한 방법이 다른 딥러닝 방법보다 일반화되었음을 보여주었다.

• 대한약침학회지
• /
• 제19권3호
• /
• pp.207-212
• /
• 2016

Objectives: Acupuncture treatments are safe and effective for a wide variety of diseases involving autonomic dysregulation. Heart rate variability (HRV) is a noninvasive method for assessing sympathovagal balance. The low frequency/high frequency (LF/HF) spectral power ratio is an index of sympathovagal influence on heart rate and of cardiovascular health. This study tests the hypothesis that from rest to 30% to 50% of peak oxygen consumption, the nonlinear Conte-Zbilut-Federici (CZF) method of computing the LF/HF ratio is a more reliable index of changes in the HRV than linear methods are. Methods: The subjects of this study were 10 healthy young adults. Electrocardiogram RR intervals were measured during 6-minute periods of rest and aerobic exercise on a cycle ergometer at 30% and 50% of peak oxygen consumption ($VO_{2peak}$). Results: The frequency domain CZF computations of the LF/HF ratio and the time domain computations of the standard deviation of normal-to-normal intervals (SDNN) decreased sequentially from rest to 30% $VO_{2peak}$ (P < 0.001) to 50% $VO_{2peak}$ (P < 0.05). The SDNN and the CZF computations of the LF/HF ratio were positively correlated (Pearson's r = 0.75, P < 0.001). fast Fourier transform (FFT), autoregressive (AR) and Lomb periodogram computations of the LF/HF ratio increased only from rest to 50% $VO_{2peak}$. Conclusion: Computations of the LF/HF ratio by using the nonlinear CZF method appear to be more sensitive to changes in physical activity than computations of the LF/HF ratio by using linear methods. Future studies should determine whether the CZF computation of the LF/HF ratio improves evaluations of pharmacopuncture and other treatment modalities.