• IEMEK Journal of Embedded Systems and Applications
• /
• v.8 no.3
• /
• pp.155-161
• /
• 2013

To reduce the personnel and material loss caused by fire, we propose the automatic fire extinguishing system based on the ignition point tracking using the flame detecter. This automatic fire extinguishing system is composed of the flame detecting system and the fire extinguishing system based on the water cannon. We study the method for the ignition point tracking and the automatic fire extinguishing using the water cannon and the flame detecter. The flame detecting system for the early fire detection and the ignition point tracking has to be satisfied the requirement of the detecting range and the flame detection time. So we study the signal process algorithm for an improvement of the flame detecting system.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2000.11a
• /
• pp.389-392
• /
• 2000

This paper presents a performance Analysis of electrically exhaust gas recirculation valve using commercial electromagnetic simulation software, Flux2D. Under the assumption of 2D axi-symmetric magnetic field, the characteristics of EEGR valve by revising the design parameter, has ken investigated by estimating the variation of thrust force with respect to the pintle position. The mode shapes and the frequency response functions were computed by using three dimensional finite element modeling of the whole EEGR valve and their accuracies were verified with experimental FFT analysis technique.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.8 no.2
• /
• pp.1-8
• /
• 1998

In this paper, a method which cna detect tracking caused by the insulation deterioration of conduct wiring, is proposed. To investigate it, we analyzed the harmonics of each load current waveform and those of tracking current waveform with FFT. The computer which take experiment data is learned by neural network algorithm, which has recently been used for the load recognition. The proposed metod in our study can be applied to the development of several measuring equipments such as hotline insulation tester, cna earch tester for the detection of tracking under hot-line state, Furthermore, it can substitutes molded case circuit breaker, fuse, and so on.

• 제어로봇시스템학회:학술대회논문집
• /
• 2001.10a
• /
• pp.127.6-127
• /
• 2001

In this paper, we deal with two bias compensation algorithms of acceleration sensor for measuring the galloping on power transmission line. Firstly, the block diagram of galloping measurement system is given and a galloping model is presented. Secondly, two compensation algorithms, a simple compensation and a period compensation, are proposed. A simple compensation algorithm use the drafts of velocity and distance at fixed periods, so it is useful for constant bias case. Next, a period compensation algorithm can compensate a periodic bias. This algorithm use the previous measured data and compensated data for constant period, where the period is obtained by FFT method. Lastly, the effectiveness of proposed algorithms is verified by comparing between two algorithms in simulation, and its characteristics and the bias error bound are shown, respectively.

• Journal of Institute of Control, Robotics and Systems
• /
• v.21 no.9
• /
• pp.863-868
• /
• 2015

In this paper, the vibration of a single-wheel mobile robot is minimized by designing a filter. An AHRS (Attitude and heading reference system) sensor is used for measuring the state of the robot. The measured signals are analyzed using the FFT method to investigate the fundamental vibrational frequency with respect to the flywheel's speed of the gimbal system. The IIR notch filter is then designed to suppress the vibration at the identified frequency. After simulating the performance of the designated filter using the measured sensor data through extensive experiments, the filter is actually implemented in a single-wheel mobile robot, GYROBO. Finally, the performance of the designed filter is confirmed by performing the balancing control task of the GYROBO system.

• Journal of Advanced Marine Engineering and Technology
• /
• v.27 no.7
• /
• pp.914-920
• /
• 2003

In this paper, we deal with two drift compensation algorithms of acceleration sensor for measuring the galloping on power transmission line. Firstly, the block diagram of galloping measurement system is given and a galloping model is presented. Secondly, two compensation algorithms, a simple compensation and a period compensation, are proposed. A simple compensation algorithm uses the drifts of velocity and distance at fixed periods, so it is useful for constant drift case. Next, a period compensation algorithm can compensate a periodic drift. This algorithm uses the previous measured data and compensated data for constant period, where the period is obtained by FFT method. Lastly, the effectiveness of proposed algorithms is verified by comparing between two algorithms in simulation, and its characteristics and the drift error bound are shown, respectively.

• Journal of the Korean Society for Precision Engineering
• /
• v.13 no.9
• /
• pp.31-37
• /
• 1996

This Paper is concerned with effective signal identification method for tool breakage and micro chipping using discrete wavelet transform of feed motor current in milling operations. The wavelet transform uses an analyzing waveletfunction which is localized in both frequency and time domain to detect subtle time localized changes in input signals. The changing pattern of wavelet coefficient is continuously compared to detect tool breakage and micro chipping over one spindle revolution. The results indicate that the wavelet transform can identify tool failure with much greater sensi- tivity than the time domain monitoring and frequency domain monitoring such as FFT. Experimental results are presented to support the proposed scheme.

• The Journal of the Acoustical Society of Korea
• /
• v.19 no.2E
• /
• pp.14-19
• /
• 2000

The forward propagated ultrasonic fields resulting from a circular plane or a concave transducer in layered fluid media as well as in homogeneous water are theoretically estimated by the angular spectrum method(ASMJ) combined with Rayleigh-Sommerfeld diffraction theory(RSDT), and measured by a precision 3-D scanning system with a needle-point hydrophone. To make the aliasing error negligible on the 2-D FFT in the theoretical estimation, the spatial discretization in the ASM are carefully considered for optimal selection of spatial sampling intervals and the size of discretization area. It is shown that the estimated fields agree reasonably with the measured ones.

• Journal of Power System Engineering
• /
• v.13 no.1
• /
• pp.33-38
• /
• 2009

In this study, the nose of cam in the automobile engine was modelled into circular disk to analyze the torsional vibration of the cam shaft. The distance between disks was fixed, but the diameter of disks was changed. The torsional vibration of the cam shaft was studied experimentally by the motion of the modelled disk with changing the disk diameter. And the sizes of the modelled disk were selected not to show the natural frequencies over all the experimental ranges. The torsional vibration meter used in this study has a laser system with non-contact measurement method, which can measure both torsional angular vibration velocity and torsional angular vibration displacement simultaneously. The Experimental analysis shows that the characteristics of the torsional vibration in the horizontal rotating shaft can be considerably affected by the arrangement of the modelled disks.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 1998.03a
• /
• pp.126-129
• /
• 1998

Proper design of blocker dies is one of the most important aspect of impression and closed-die forging to achieve adequate metal distribution. Determination of the blocker configuration is a very difficult task and is art in itself, requiring skills achieved only by years of extensive experience. To save the cost and time of blocker design, many methods using computer were proposed. In this research, low pass filter method proposed by Oh etc. was applied to blocker die design of spoiler support, part of aircraft and plasticine model experiment of closed die forging of spoiler support was accomplished to verify the validity of the blocker designed.