• Journal of Communications and Networks
• /
• 제8권1호
• /
• pp.38-48
• /
• 2006

A synchronous multicarrier (MC) code-division multiple access (CDMA) system using inverse fast Fourier transform (IFFT) and fast Fourier transform (FFT) for the downlink mobile communication system operating in a frequency selective Rayleigh fading channel is analyzed. Both carrier frequency offset and timing offset are considered in the analysis. Bit error rate performance of the system with both equal gain combining and maximum ratio combining are obtained. The performance is compared to that of the conventional system using correlation receiver. It is shown that when subcarrier number is large, the system using IFFT/FFT has nearly the same performance as the conventional one, while when the sub carrier number is small, the system using IFFT/FFT will suffer slightly worse performance in the presence of carrier frequency offset.

• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 1999년도 제29회 춘계학술대회
• /
• pp.73-79
• /
• 1999

Finite element equations by using fast Fourier transformation were formulated for studying temperatures resulting from frictional heating in sliding systems. The equations include the effect of velocity of moving components. The program developed by using FFT-FEM that combines Fourier transform techniques and the finite element method, was applied to the sliding bearing system. Numerical prediction obtained by FFT-FEM was in an excellent agreement of experimental temperature measurements.

• Applied Microscopy
• /
• 제44권4호
• /
• pp.138-143
• /
• 2014

Transmission electron microscope (TEM) is an excellent tool for studying the structure and properties of nanostructured materials. As the development of $C_s$-corrected TEM, the direct analysis of atomic structures of nanostructured materials can be performed in the high-resolution transmission electron microscopy (HRTEM). Especially, fast Fourier transform (FFT) technique in image processing is very useful way to determine the crystal structure of HRTEM images in reciprocal space. To apply FFT technique in HRTEM analysis in more reasonable and friendly manner, we made a new circular region of interest (C-ROI) FFT script and tested it for several HRTEM analysis. Consequentially, it was proved that the new FFT application shows more quantitative and clearer results than conventional FFT script by removing the streaky artifacts in FFT pattern images. Finally, it is expected that the new FFT script gives great advantages for quantitative interpretation of HRTEM images of many nanostructured materials.

• Tribology and Lubricants
• /
• 제16권3호
• /
• pp.218-222
• /
• 2000

Finite element equations by using fast Fourier transformation were formulated for studying temperatures resulting from frictional heating in sliding systems. The equations include the effect of velocity of moving components. The program developed by using FFT-FEM that combines Fourier transform techniques and the finite element method, was applied to the sliding bearing system. Numerical prediction obtained by FFT-FEM was in an excellent agreement of experimental temperature measurements.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 1998년도 추계종합학술대회 논문집
• /
• pp.343-346
• /
• 1998

In this paper a radiation problem for a finite microstrip antenna structure is analyzed. For the analysis of finite structures we utilize the equivalent volume current. Intergral equation for the unknown equivalent volume current induced on a finite microstrip structure is derived and solved by the use of conjugate gradient-fast fourier. transform (CG-FFT) method. Some numerical examples are radiation patterns derived by the equivalent volume current solved by the conjugate gradient-fast fourier transform.

• 대한기계학회논문집A
• /
• 제25권8호
• /
• pp.1253-1260
• /
• 2001

Transient thermal analysis of a three-dimensional axisymmetric automotive disk brake is presented in this paper. Temperature fields are obtained using a hybrid FFT-FEM scheme that combines Fourier transform techniques and finite element method. The use of a fast Fourier transform algorithm can avoid singularity problems and lead to inexpensive computing time. The transformed problem is solved with finite element scheme for each frequency domain. Inverse transforms are then performed for time domain solution. Numerical examples are presented for validation tests. Comparisons with analytical results show very good agreement. Also, a 3-D simulation, based upon an automotive brake disk model is performed.

• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 2001년도 제34회 추계학술대회 개최
• /
• pp.13-18
• /
• 2001

In this paper, FFT(Fast Fourier Transform) analysis of friction was suggested as a method to interpret the contact conditions. Micro-grooves with various dimensions were fabricated on the silicon surface to investigate the frictional behavior with respect to the change in geometrical contact condition. Frictional forces between micro-grooved surfaces and spheres modeled as surface asperities were measured using a micro-tribotester which was built inside a SEM(Scanning Electron Microscope). The experimental results show that the relative dimensions and distributions of contact asperities between two surfaces can be predicted by the power spectrum and the main frequency in FFT-based analysis of friction coefficient. Also, it was shown that the friction coefficient for multi-asperities was the result of the superposition of that for each asperity.

• 한국철도학회논문집
• /
• 제9권1호
• /
• pp.63-68
• /
• 2006

This paper proposes a fast Fourier transform(FFT)-based spectral analysis method(SAM) for the dynamic responses of the linear discrete dynamic models with non-proportional damping. The SAM was developed by using discrete Fourier transform(DFT)-theory. To verify the proposed SAM, a three-DOF system with non-proportional viscous damping is considered as an illustrative example. The present SAM is evaluated by comparing the dynamic responses obtained by SAM with those obtained by Runge-Kutta method.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2010년도 추계학술대회
• /
• pp.88-91
• /
• 2010

본 논문에서는 의료 서비스를 위한 뇌전기파(EEG : electroencephalogram) 신호 분석용 FFT(Fast Fourier Transform) 프로세서를 구현하였다. 실시간으로 발생하는 긴 신호를 short-time FFT 처리하기 위해 Hamming 창 함수를 사용하였으며, 이로 인해 감소되는 양끝의 값은 1/2 오버랩 시켜주어 보완하였다. 0~100[Hz] 사이의 주파수 특성을 가지는 뇌전기파의 효율적인 대역 분석을 위해 256-point FFT 프로세서를 radix-4 알고리듬을 적용하여 구현하였고, 단일 메모리 뱅크 구조를 사용하여 집적도를 높였다. 설계된 FFT 프로세서는 연산오차가 3% 이내로 높은 연산 정밀도를 갖는다.

• 한국정보통신학회논문지
• /
• 제14권11호
• /
• pp.2548-2554
• /
• 2010

본 논문에서는 의료 서비스를 위한 뇌전기파(EEG: electroencephalogram) 신호 분석용 FFT(Fast Fourier Transform) 프로세서를 구현하였다. 실시간으로 발생하는 EEG 신호를 블록으로 나누어 short-time FFT 처리하기 위해 Hamming 창 함수를 사용하였으며, 이로 인해 감소되는 양끝의 값은 1/2 오버랩 시켜 보완하였다. 0~100 [Hz] 사이의 주파수 특성을 갖는 뇌전기파의 효율적인 대역 분석을 위해 256-point FFF 프로세서를 radix-4 알고리듬을 적용하여 구현하였으며, 단일 메모리 뱅크 구조를 사용하여 집적도를 높였다. 설계된 FFT 프로세서는 FPGA 구현을 통해 가능을 검증하였으며, 연산오차가 2% 이내로 높은 연산 정밀도를 갖는다.