• 한국시뮬레이션학회논문지
• /
• 제5권1호
• /
• pp.28-42
• /
• 1996

This paper describes a new automated simulation system for micromachines whose size range $10^{-6}$ to $10^{-3}$ m. An automic finite element (FE) mesh generation technique, which is bases on the fuzzy knowledge processing and computation al geometry technique, is incorporated into the system, together with one of commerical FE analysis codes, MARC ,and one of commerical solid modelers, Designbase. The system allows a geometry model of concern to be automatically converted to different FE models, depending on physical phenomena of micromachines to be analyzed , i,e. electrostatic analysis, stress analysis, modal analysis and so on. The FEmodels are then automatically analyzed using the FE analysis code, Among a whole process of analysis, the definition of a geometry model, the designation of local node patterns and the assignment of material properties and boundary conditions onto the geometry model are only the interactive process to be done by a user. The interactive operations can be processed in a few minutes. The other processes which are time consuming and labour-intensive in conventional CAE systems are fully automatically performed in a popular engineering workstation environment. This automated simulation system is successfully applied to evaluate an electrostatic micro wobble actuator.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2005년도 추계학술대회 논문집
• /
• pp.436-439
• /
• 2005

Condenser tube has been used as a component of heat exchanger in automobile and air conditioning apparatus. In this paper, porthole die extrusion that is advantageous to form long hollow section tube is analyzed by direct extrusion of condenser tube with 12 holes. A study on extrusion process is performed through the 3D FE simulation at non-steady state and extrusion experiments. Especially, weldability, extrusion load and die defects were estimated try FE-simulation. This study present the redesigned die of direct extrusion in consideration of the results obtained from FE-analysis.

• 한국표면공학회지
• /
• 제39권2호
• /
• pp.76-81
• /
• 2006

Molecular dynamics simulations were carried out to investigate physical sputtering of Fe(100) substrate due to energetic ion bombardments. Repulsive interatomic potentials at short internuclear distances were determined with ab initio calculations using the density functional theory. Bohr potentials were fitted to the ab initio results on diatomic pairs (Ar-Fe, Fe-Fe) and used as repulsive screened Coulombic potentials in sputtering simulations. The fitted-Bohr potentials improve the accuracy of the sputtering yields predicted by molecular dynamics for sputtering of Fe(100), whereas Moliere and ZBL potentials were found to be too repulsive and gave relatively high sputtering yields. In spite of assumptions and limitations in this simulation work, the sputtering yields predicted by the molecular dynamics method were in fairly good accordance with the obtainable experimental data in absolute values as well as in manner of the variation according to the Incident energy. Threshold energy for sputtering of Fe(100) substrate was found to be about 40 eV. Additionally, distributions of kinetic energies of sputtered atoms and their original depths could be obtained.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 1999년도 춘계학술대회논문집
• /
• pp.140-143
• /
• 1999

The major objective of the present paper is to develop a channel cutting machine and to establish an analytical technique for actual shearing process. Isothermal finite element(FE)-simulation of the shearing process are carried out using FE software DEFORM. The element-kill method has enabled the achievement of FE-simulation from the initial stage to the final stage of the shearing process. The effects of the punch-die clearance on the shearing process are investigated.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2007년도 추계학술대회 논문집
• /
• pp.213-214
• /
• 2007

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2010년도 추계학술대회 논문집
• /
• pp.811-812
• /
• 2010

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2010년도 추계학술대회 논문집
• /
• pp.801-802
• /
• 2010

• International Journal of Precision Engineering and Manufacturing
• /
• 제5권1호
• /
• pp.36-41
• /
• 2004

The blanking of thin sheet metal using progressive dies is an important process on production of precision electronic machine parts such as IC leadframe. This paper summarizes the results of simulating the progressive blanking process by means of LS/DYNA. In order to verify the influence of blanking order on the final lead profile and deformed configuration, simulation technique has been proposed and analyzed using a commercial FEM code, LS/DYNA. The results of FE-simulations are in good agreement with the experimental result. After then, to construct rule base in progressive blanking process, FE-simulation has been performed using a simple model. Based on this result rule base is set up and then the blanking order of inner lead is rearranged. Consequently, from the results of FE-simulation using suggested method in this paper, it is possible to predict the shift of lead to manufacture high precision lead frame in progressive blanking process. The proposed method can give more systematic and economically feasible means for designing progressive blanking process.

• 한국진공학회지
• /
• 제17권6호
• /
• pp.511-517
• /
• 2008

기체 방전의 수치적 시뮬레이션을 위하여 FE-FCT(Finite-Element Flux-Corrected Transport) 방법을 이용한 준 2차원 수치적 모델을 제시한다. 이 모델에서는 전자와 이온에 대한 1차원 연속방정식을 풀어 시 공간적으로 변하는 전하 분포를 계산하고, 공간 전하 분포에 의한 전기장의 변화는 2차원적 전하 분포를 고려하는 디스크 방법을 적용하여 푸아송(Poisson)방정식을 풀어 계산한다. 다양한 벤치마크 문제에 대해 계산한 결과는 이 모델의 정확성과 적용성을 잘 보여준다. 또 스트리머 방전에 대해 계산한 결과는 앞선 연구 결과와 잘 일치하는 것을 보여 준다.

• 한국자기학회:학술대회 개요집
• /
• 한국자기학회 1995년도 추계연구발표회 논문개요집
• /
• pp.22-23
• /
• 1995