• 대한기계학회논문집A
• /
• 제34권8호
• /
• pp.997-1006
• /
• 2010

차체 경량화를 위해 알루미늄과 같은 경량금속의 사용은 이종소재 사용은 새로운 접합기술을 요구한다. 클린칭 접합은 이종소재 접합기술 중의 하나로 접합소재의 강도차이에 의해 접합특성이 달라진다. 본 연구에서는 Al5052 합금소재에 대한 고장력강판(SPFC440, 590, 780)에 대한 클린칭 접합특성을 평가하였다. 유한요소해석과 인장전단시험을 통해 클린칭 접합특성인 클린칭 접합의 기학적 구속량과 접합강도를 평가하였다. 상부소재가 고장력강판인 경우, SPFC780 은 상부소재의 네킹으로 클린칭 접합이 불가능하였다. 또한 상부소재의 강도가 증가함에 따라 접합강도가 증가하는 특성을 나타내었다. 하부소재가 고장력강판인 경우, 기하학적 구속량인 목두께 및 언더컷과 접합강도는 하부소재의 강도가 증가함에 따라 감소하는 경향을 나타내었다.

• 수산해양기술연구
• /
• 제14권2호
• /
• pp.69-78
• /
• 1978

알루미나이징강에 대하여 초기마모영역에서 rolling-sliding 마모시험을 한 결과를 요약하면 다음과 같다. 1) 2차 확산재의 내마모성이 가장 우수하고 처녀재에 비하여 저응력 레벨에서 약 18%, 고응력에서 약 40%의 마모감소를 나타낸다. 2) 2차 확산재는 피복층과 합금층 경계부근의 공공생성으로 인하여 예상보다 내마모성이 낮다. 3) 알루미나이징강의 rolling-sliding 접촉에 의한 마모파양의 형태는 spalling 이며 spalling crack은 합금속의 경계부근에서 발생한다.

• Asian-Australasian Journal of Animal Sciences
• /
• 제17권1호
• /
• pp.46-52
• /
• 2004

Hisardale male lambs (n=24, 4-5 month of age) were maintained on a conventional ration for a month, to equilibrate the body mineral status. Six lambs were sacrificed after one month of feeding; the samples of organs were analyzed to ascertain mineral status. The remaining 18 lambs were divided into 3 groups of 6 each on body weight basis. Three dietary treatments containing 100 ($T_1$), 110 ($T_2$) and 120% ($T_3$) of minerals (Ca, P, S, Zn and Mn) as specified by NRC (1985) were formulated and each treatment was alloted ad libitum to a group for 120 days. Blood and wool samples were collected at monthly intervals. At the end of the experiment a balance trial of 5 days duration was conducted to study the balance of mineral elements. The effective intake of minerals was Ca, 111 and 120, P, 110 and 122; S, 112 and 129; Zn, 112 and 126 and Mn, 109 and 123 percent in $T_2$ and $T_3$, respectively, in comparison to $T_1$ (100). The additional mineral supplementation had no significant effect on dry matter intake. The average daily weight gain was higher (p<0.01) in $T_2$ and $T_3$ than the control ($T_1$). The lambs under treatments $T_2$ (8.72) and $T_3$ (8.47 kg) consumed apparently lesser amount of dry matter per unit gain as compared to $T_1$ (10.81 kg). Significantly higher (p<0.05) dry matter and crude protein digestibility (%) were observed in $T_2$ and $T_3$ than in $T_1$. The mean balances for different elements were Ca, 1.14, 1.68 and 1.67 g; P, 1.70, 1.95 and 2.18 g; S, 0.54, 0.92 and 1.11 g; Zn, 22.56, 25.30 and 28.71 mg; Cu, 7.94, 5.71 and 5.53 mg; Fe, 33.19, 32.94 and 31.03 mg and Mn, 8.24, 14.40 and 16.07 mg/lamb/day. The retention of supplemental minerals increased (p<0.01) while that of Cu decreased (p<0.01) due to supplementation of minerals (Ca, P, S, Zn and Mn). Retention as per cent of intake increased statistically for S and Mn while that of Cu decreased. It can be concluded that supplementation of minerals (Ca, P, S, Zn and Mn) higher than the recommended level improved body weight gain and feed to gain ratio. The retention of minerals increased due to supplementation. Therefore, an additional supplementation of deficient minerals (Ca, P, S, Zn and Mn) by 10% was beneficial for Hisardale male lambs under tropical condition in India.

• Asian-Australasian Journal of Animal Sciences
• /
• 제14권2호
• /
• pp.243-249
• /
• 2001

Thirty six barrows with an initial body weight of 28 kg were used to determine the effect of two dietary Se sources and a wide range of Se levels encompassing 0.3, 1.0, 3.0, 5.0, 7.0, and 10.0 mg/kg Se. The organic Se form was a Se-enriched yeast product, whereas the inorganic Se source was sodium selenite. The experiment was a $2{\times}6$ RCB design conducted in three replicates. Each barrow was placed in an individual metabolism crate and provided their dietary treatment and water on an ad libitum basis for a minimum 2 wk period, whereupon feed intake was adjusted to a constant intake within replicate at approximately 90% of intake for a 4 d adjustment period. Urine and feces were subsequently collected for a 7 d period and analyzed for Se and minerals. The results demonstrated that urinary Se was approximately 25% higher when pigs were fed sodium selenite (p<0.01), whereas fecal Se was lower by 25% (p<0.01). Se retention tended to be higher when organic Se was provided (p>0.15). Urinary Se increased as dietary Se level increased for both Se sources but increased more and at a high rate when sodium selenite was fed resulting in an interaction response (p<0.01). Fecal Se increased linearly as the dietary level of both Se sources increased, but the fecal Se from organic Se increased at a faster rate resulting in an interaction response (p<0.01). Se retention increased linearly (p<0.01) as dietary Se increased for both Se sources. The apparent digestibility of Se increased by Se level when pigs were fed sodium selenite, but not when the organic Se source was provided resulting in an interaction response (p<0.05). Retention of consumed Ca, Zn increased when pigs were fed organic Se (p<0.05) whereas P and Na retention were higher when the inorganic Se was provided. Mineral retention was not affected by dietary Se level except P. These results suggest that Se excretion by urine was the main route of excretion when pigs were fed sodium selenite but the fecal route when Se-enriched yeast was provided. The excretion of Fe, Zn, Mn, and Cu via urine and feces was not affected by high dietary Se level or dietary Se sources.

• Asian-Australasian Journal of Animal Sciences
• /
• 제14권10호
• /
• pp.1389-1393
• /
• 2001

A study was carried out to investigate the nutritive value and utilization of three grass species, batiki grass (lschaemum aristatum var. indicum), guinea grass (Panicum maximum) and signal grass (Bracharia decumbens) by growing goats. Eighteen growing crossbred goats $(Anglo-Nubian{\times}Fiji\;local)$ of between 9-11 months of age and pre-trial average live weight of $9.50{\pm}1.60kg$ were divided on the basis of weight to three treatment groups in a completely randomized design. The grasses constituted the diets and they were harvested fresh and chopped into pieces before they were offered to the goats. Chemical composition of the grasses, DMI, body weight gain (BWG) and apparent nutrient digestibility coefficients were measured. The grasses had similar DM content. The CP content of the grasses was in the range of 8.3-11.2%. Crude fiber (CF) content was between 30.9-35.2%. Ether extract (EE) was low with a range of 1.2-1.8%. Nitrogen free extract (NFE) was similar (40.9%) for batiki and guinea grasses, while signal grass had more NFE content (51.1%). The grasses are good sources of minerals (ash). OM content was higher in signal grass while guinea and batiki grasses had similar OM content. The goats on signal grass had higher DMI than those on batiki and guinea grasses (p<0.05). The goats on batiki grass had lower average BWG (p<0.05) than those on guinea and signal grasses. Nutrients digestibility were significantly (p<0.05) higher in the goats on signal grass compared to those on guinea and batiki grasses. The goats on guinea grass were better (p<0.05) in the digestibility of CP, OM, NFE and ME than those on batiki grass. However, goats on batiki were significantly better (p<0.05) in digestibility of CF than those on guinea grass. Signal and guinea grasses had more DCP than batiki grass. DE was lower in batiki grass (p<0.05) than in guinea and signal grasses. There was no significant difference (p>0.05) between batiki and guinea grasses in TON. Data obtained in this experiment demonstrated that signal grass is better than guinea and signal in the nutrition of growing goats in the tropical environment of Samoa. It had the highest nutritive value, better apparent digestibility coefficients which have better growth rate and feed efficiency. In ranking, signal grass was better than guinea and batiki grasses, while guinea grass was better than batiki in nutritive value in the parameters measured. For future pasture establishment in Samoa, signal grass is recommended for consideration because of its higher nutritive value as a replacement for batiki, the most predominant grass.

• 한국약용작물학회지
• /
• 제7권4호
• /
• pp.288-295
• /
• 1999

신선초의 시설양액재배시 적정양액의 종류를 구명하기 위하여 생육, 수량 및 품질에 미치는 영향을 조사한 결과는 다음과 같다. 1. 신선초의 초장은 시설양액재배의 화란액이 59.8cm로 가장 컸으며, 엽장은 화란액이 37.4 cm로 가장 길었고, 엽폭도 화란액이 35.8cm로 가장 넓었으며, 수량도 4,542kg/10a로 노지재배 (1,904kg/10a)에 비하여 139% 증수되어, 신선초 시설양액재배시 적정양액은 화란액으로 판단되었다. 2. 신선초의 엽록소함량은 노지재배가 $3.60mg/100cm^2$으로 가장 많았다. 3. 신선초의 물추출 엑스수율은 화란액이 25.97%로서 야마자끼액 (21.93%), 한국원시액 (20.56%) 및 노지재배 (19.71)%)보다 높았으며, 50% 에탄올추출 엑스수율은 각 처리별 $26.59{\sim}29.31%$로서 별 차이가 없었다. 4. 신선초의 무기성분함량 분석결과 주성분은 Na이였으며, 한국원시액은 Mg와 Zn, 야마자끼액은 Na와 Fe, 화란액은 K, Cu, P가 비교적 높은 함량을 나타냈고, 시설양액계배와 노지재배간에는 유사한 함량을 나타냈다. 5. 신선초의 게르마늄함량은 한국원시액이 0.35ppm으로 야마자끼액 (0. 22ppm), 화란액 (0.18ppm) 및 노지재배 (0. 25ppm)보다 약간 높게 나타났다.

• 한국표면공학회지
• /
• 제41권6호
• /
• pp.292-300
• /
• 2008

Dental implant system is composed of abutment, abutment screw and implant fixture connected with screw. The problems of loosening/tightening and stability of abutment screw depend on surface characteristics, like a surface roughness, coating materials and friction resistance and so on. For this reason, surface treatment of abutment screw has been remained research problem in prosthodontics. The purpose of this study was to investigate the stability of TiN and WC coated dental abutment screw, abutment screw was used, respectively, for experiment. For improving the surface characteristics, TiN and WC film coating was carried out on the abutment screw using EB-PVD and sputtering, respectively. In order to observe the coating surface of abutment screw, surfaces of specimens were characterized, using field emission scanning electron microscope(FE-SEM) and energy dispersive x-ray spectroscopy(EDS). The stability of TiN and WC coated abutment screw was evaluated by potentiodynamic, and cyclic potentiodynamic polarization method in 0.9% NaCl solution at $36.5{\pm}1^{\circ}C$. The corrosion potential of TiN coated specimen was higher than those of WC coated and non-coated abutment screw. Whereas, corrosion current density of TiN coated screws was lower than those of WC coated and non-coated abutment screw. The stability of screw decreased as following order; TiN coating, WC coating and non-coated screw. The pitting potentials of TiN and WC coated specimens were higher than that of non-coated abutment screw, but repassivation potential of WC coated specimen was lower than those of TiN coated and non-coated abutment screws due to breakdown of coated film. The degree of local ion dissolution on the surface increased in the order of TiN coated, non-coated and WC coated screws.

• 한국가정과학회지
• /
• 제3권2호
• /
• pp.77-89
• /
• 2000

In this study, to activate the industrialization and to improve the quality of Toha-jeot by shortening the fermentation period, we investigated the changes in the nutritional components of Toha-jeot. salt-fermented Toha shrimp( Caridina denticulata denticulata $D_{E}$ $H_{AAN}$) which was salted with a low-salt group and high-salt group during fermentation. In this experiment. there are four groups of Toha-jeot which were manufactured with 15% ratio of common salt: the first group containing 2% wheat bran (w2%-L). the second high-salt group containing 2% wheat bran( w2%-H) , the third low-salt group containing 4% wheat bran (w4%-L) and the last high-salt group containing 4% wheat bran(w4%-H). These four groups were refrigerated at 4${\pm}$1$^{\circ}C$ and then taken out for analysis at three month intervals during 9 month. Among the free amino acid contents in Toha-jeot, 22 kinds were detected. 6 month after the fermentation when the quantity of the amino acid contents in Toha-jeot is highest, ornitine, glutamic acid, leucine. alanine. lysine and valine occupy the majority, in the order of abundance. In cases of nucleotides. 6 month after the fermentation. from the groups w2%-L, w2%-H and w4%-L, inosine and IMP were not detected. and hypoxanthine, AMP, ADP were detected but 9 month after the fermentation ADP was not detected. The main constituents of fatty acid were as follows : (a) from w2%-L, w2%-H, 6 month after the fermentation. $C16:0$, $C12:0$, $C18:1$, $C18:3$, and $C16:1$. (b) from w4%-L. 6 month after the fermentation, $C18:3$, $C16:0$, $C12:0$ and $C18:1$. (c) from W4%-H, $C16:0$, $C12:0$, $C18:3$ and $C18:1$. In case of mineral contents. Na, Ca. K. Mg, Fe. Zn, Mn and Cu were detected according to the magnitude of the quantity. From the group w4%-H, high quantity of Na was detected during the total fermentation period. In case of color value, from the groups w2%. the values of L. a. b were highest after 6 month fermentation and were decreased after 9 month fermentation, while from groups w4%, the values of L, a, b were gradually decreased after 3 month fermentation.ion.

• 한국환경농학회지
• /
• 제17권2호
• /
• pp.164-169
• /
• 1998

토양반응이 산성이고 붕소함량이 낮은 사양질 밭에서 토양개량제로 석탄회와 석고, 패각을 석탄회 80, 패각4, 석탄회56+석고24, 석탄회40+석고24+패각0.8ton/ha 사용하고 가을 노지배추를 재배하여, 이들의 토양개량 및 작물증수 효과를 검토하였다. 전반적으로 석탄회, 석고, 패각 시용은 토양화학성을 개선시켰으며 배추 수량과 엽중 N, P, K, Ca, B 함량을 증대시켰다. 개량제중 석탄회를 단용한 구에서는 토양의 산도중화능이 우수하였고 유효인산 및 붕소의 증가와 철의 감소가 가장 뚜렷하였다. 석탄회+석고+패각의 혼용구에서는 칼슘, 마그네슘, 붕소의 증가가 뚜렷하였다. 그리고 석탄회가 시용된 구에서는 개량제 무시용구 및 패각단 용구와 달리 붕소결핍 없이 증수된 경향이었다. 처리별 증수효과는 대조구 수량 78.2ton/ha을 기준으로 석탄회+석고+패각 혼용구에서 85%, 석탄회+석고 혼용구에서 77%, 석탄회 단용구에서 66%, 패각 단용구에서 5%였다. 수확된 배추내에 N, B, 환원당, 비타민-C 함량은 처리별 성적 수량과 일치하였고 조섬유 함량은 그 반대 경향이었다.

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2018년도 춘계학술대회 논문집
• /
• pp.75-75
• /
• 2018

Commercially pure titanium (CP-Ti) and Ti-6Al-4V alloys have been widely used in implant materials such as dental and orthopedic implants due to their corrosion resistance, biocompatibility, and good mechanical properties. However, surface modification of titanium and titanium alloys is necessary to improve osseointegration between implant surface and bone. Especially, when titanium oxide nanotubes are formed on the surface of titanium alloy, cell adhesion is greatly improved. In addition, plasma electrolytic oxide (PEO) coatings have a good safety for osseointegration and can easily and quickly form coatings of uniform thickness with various pore sizes. Recently, the effects of bone element such as magnesium, zinc, strontium, silicon, and manganese for bone regeneration are researching in dental implant field. The purpose of this study was researched on the surface morphology of PEO-treated Ti-6Al-4V alloy after anodic titanium oxide treatmentusing various instruments. Ti-6Al-4V ELI disks were used as specimens for nanotube formation and PEO-treatment. The solution for the nanotube formation experiment was 1 M $H_3PO_4$ + 0.8 wt. % NaF electrolyte was used. The applied potential was 30V for 1 hours. The PEO treatment was performed after removing the nanotubes by ultrasonics for 10 minutes. The PEO treatment after removal of the nanotubes was carried out in the $Ca(CH_3)_2{\cdot}H_2O+(CH_3COO)_2Mg{\cdot}4H_2O+Mn(CH_3COO)_2{\cdot}4H_2O+Zn(CH_3CO_2)_2Zn{\cdot}2H_2O+Sr(CH_2COO)_2{\cdot}0.5H_2O+C_3H_7CaO_6P$ and $Na_2SiO_3{\cdot}9H_2O$ electrolytes. And the PEO-treatment time and potential were 3 minutes at 280V. The morphology changes of the coatings on Ti-6Al-4V alloy surface were observed using FE-SEM, EDS, XRD, AFM, and scratch tester. The morphology of PEO-treated surface in 5 ion coating solution after nanotube removal showed formation or nano-sized mesh and micro-sized pores.